Events in Property Patterns

A pattern-based approach to the presentation, codification and reuse of property specifications for finite-state verification was proposed by Dwyer and his collegues. The patterns enable non-experts to read and write formal specifications for realistic systems and facilitate easy conversion of specifications between formalisms, such as LTL, CTL, QRE. In this paper, we extend the pattern system with events - changes of values of variables in the context of LTL.Comment: 14 pages, 3 figure

Steady non-ideal detonations in cylindrical sticks of expolsives

Numerical simulations of detonations in cylindrical rate-sticks of highly non-ideal explosives are performed, using a simple model with a weakly pressure dependent rate law and a pseudo-polytropic equation of state. Some numerical issues with such simulations are investigated, and it is shown that very high resolution (hundreds of points in the reaction zone) are required for highly accurate (converged) solutions. High resolution simulations are then used to investigate the qualitative dependences of the detonation driving zone structure on the diameter and degree of confinement of the explosive charge. The simulation results are used to show that, given the radius of curvature of the shock at the charge axis, the steady detonation speed and the axial solution are accurately predicted by a quasi-one-dimensional theory, even for cases where the detonation propagates at speeds significantly below the Chapman-Jouguet speed. Given reaction rate and equation of state models, this quasi-one-dimensional theory offers a significant improvement to Wood-Kirkwood theories currently used in industry

A review of X-ray laser development at Rutherford Appleton Laboratory

Recent experiments undertaken at the Rutherford Appleton Laboratory to produce X-ray lasing over the 5-30 nm wavelength range are reviewed. The efficiency of lasing is optimized when the main pumping pulse interacts with a preformed plasma. Experiments using double 75-ps pulses and picosecond pulses superimposed on 300-ps background pulses are described. The use of travelling wave pumping with the approximately picosecond pulse experiments is necessary as the gain duration becomes comparable to the time for the X-ray laser pulse to propagate along the target length. Results from a model taking account of laser saturation and deviations from the speed of light c of the travelling wave and X-ray laser group velocity are presented. We show that X-ray laser pulses as short as 2-3 ps can be produced with optical pumping pulses of approximate to1-ps

Saturn’s northern auroras as observed using the Hubble Space Telescope

We discuss the features of Saturn’s northern FUV auroras as observed during a program of Hubble Space Telescope observations which executed over 2011-2013 and culminated, along with Cassini observations, in a comprehensive multi-spectral observing campaign. Our 2011-2013 observations of the northern aurora are also compared with those from our 2007-2008 observation of the southern aurora. We show that the variety of morphologies of the northern auroras is broadly consistent with the southern, and determine the statistical equatorward and poleward boundary locations. We find that our boundaries are overall consistent with previous observations, although a modest poleward displacement of the poleward boundaries is due to the increased prevalence of poleward auroral patches in the noon and afternoon sectors during this program, likely due to the solar wind interaction. We also show that the northern auroral oval oscillates with the northern planetary period oscillation (PPO) phase in an elongated ellipse with semi-major axis ∼1.6°1.6° oriented along the post-dawn/post-dusk direction. We further show that the northern auroras exhibit dawn-side brightenings at zero northern magnetic PPO phase, although there is mixed evidence of auroral emissions fixed in the rotating frame of the northern PPO current system, such that overall the dependence of the auroras on northern magnetic phase is somewhat weak

The proximal drivers of large fires: A Pyrogeographic study

Variations in global patterns of burning and fire regimes are relatively well measured, however, the degree of influence of the complex suite of biophysical and human drivers of fire remains controversial and incompletely understood. Such an understanding is required in order to support current fire management and to predict the future trajectory of global fire patterns in response to changes in these determinants. In this study we explore and compare the effects of four fundamental controls on fire, namely the production of biomass, its drying, the influence of weather on the spread of fire and sources of ignition. Our study area is southern Australia, where fire is currently limited by either fuel production or fuel dryness. As in most fire-prone environments, the majority of annual burned area is due to a relatively small number of large fires. We train and test an Artificial Neural Network’s ability to predict spatial patterns in the probability of large fires (>1,250 ha) in forests and grasslands as a function of proxies of the four major controls on fire activity. Fuel load is represented by predicted forested biomass and remotely sensed grass biomass, drying is represented by fraction of the time monthly potential evapotranspiration exceeds precipitation, weather is represented by the frequency of severe fire weather conditions and ignitions are represented by the average annual density of reported ignitions. The response of fire to these drivers is often non-linear. Our results suggest that fuel management will have limited capacity to alter future fire occurrence unless it yields landscape-scale changes in fuel amount, and that shifts between, rather than within, vegetation community types may be more important. We also find that increased frequency of severe fire weather could increase the likelihood of large fires in forests but decrease it in grasslands. These results have the potential to support long-term strategic planning and risk assessment by fire management agencies

A Numerical Treatment of the Rf SQUID: II. Noise Temperature

We investigate rf SQUIDs (Superconducting QUantum Interference Devices), coupled to a resonant input circuit, a readout tank circuit and a preamplifier, by numerically solving the corresponding Langevin equations and optimizing model parameters with respect to noise temperature. We also give approximate analytic solutions for the noise temperature, which we reduce to parameters of the SQUID and the tank circuit in the absence of the input circuit. The analytic solutions agree with numerical simulations of the full circuit to within 10%, and are similar to expressions used to calculate the noise temperature of dc SQUIDs. The best device performance is obtained when \beta_L'\equiv 2\pi L I_0\Phi_0 is 0.6 - 0.8; L is the SQUID inductance, I_0 the junction critical current and \Phi_0 the flux quantum. For a tuned input circuit we find an optimal noise temperature T_{N,opt}\approx 3Tf/f_c, where T, f and f_c denote temperature, signal frequency and junction characteristic frequency, respectively. This value is only a factor of 2 larger than the optimal noise temperatures obtained by approximate analytic theories carried out previously in the limit \beta_L'<<1. We study the dependence of the noise temperature on various model parameters, and give examples using realistic device parameters of the extent to which the intrinsic noise temperature can be realized experimentally.Comment: submitted to J. Low Temp. Phy

Reverse Engineering of Middleware for Verification of Robot Control Architectures

We consider the problem of automating the verification of distributed control software relying on publish-subscribe middleware. In this scenario, the main challenge is that software correctness depends intrinsically on correct usage of middleware components, but structured models of such components might not be available for analysis, e.g., because they are too large and complex to be described precisely in a cost-effective way. To overcome this problem, we propose to identify abstract models of middleware as finite-state automata, and then to perform verification on the combined middleware and control software models. Both steps are carried out in a computer-assisted way using state-of-the-art techniques in automata-based identification and verification. Our main contribution is to show that the combination of identification and verification is feasible and useful when considering typical issues that arise in the implementation of distributed control software.Comment: 14 pages, 4 figures. The final version of the article is published in Proc. of "Simulation, Modeling, and Programming for Autonomous Robots", SIMPAR 2014 (published by Springer

Bounded Model Checking of GSMP Models of Stochastic Real-Time Systems

Model checking is a popular algorithmic verification technique for checking temporal requirements of mathematical models of systems. In this paper, we consider the problem of verifying bounded reachability properties of stochastic real-time systems modeled as generalized semi-Markov processes (GSMP). While GSMPs is a rich model for stochastic systems widely used in performance evaluation, existing model checking algorithms are applicable only to subclasses such as discrete-time or continuous-time Markov chains. The main contribution of the paper is an algorithm to compute the probability that a given GSMP satisfies a property of the form “can the system reach a target before time T within k discrete events, while staying within a set of safe states”. For this, we show that the probability density function for the remaining firing times of different events in a GSMP after k discrete events can be effectively partitioned into finitely many regions and represented by exponentials and polynomials. We report on illustrative examples and their analysis using our techniques

A Temporal Logic Based Theory of Test Coverage and Generation

This paper presents a theory of test coverage and generation from specifications written in extended finite state machines (EFSMs). We investigate a family of coverage criteria based on the information of control flow and data flow in EFSMs and characterize them using the temporal logic CTL. We discuss the complexity of minimal cost test generation and describe a simple heuristic which uses the capability of model checkers to construct counterexamples. Our approach extends the range of applications of model checking from automatic verification of finite state systems to automatic test generation from finite state systems

Considerations in relation to off-site emergency procedures and response for nuclear accidents

The operation of nuclear facilities has, fortunately, not led to many accidents with off-site consequences. However, it is well-recognised that should a large release of radioactivity occur, the effects in the surrounding area and population will be significant. These effects can be mitigated by developing emergency preparedness and response plans prior to the operation of the nuclear facility that can be exercised regularly and implemented if an accident occurs. This review paper details the various stages of a nuclear accident and the corresponding aspects of an emergency preparedness plan that are relevant to these stages, both from a UK and international perspective. The paper also details how certain aspects of emergency preparedness have been affected by the accident at Fukushima Dai-ichi and as a point of comparison how emergency management plans were implemented following the accidents at Three Mile Island 2 and Chernobyl. In addition, the UK’s economic costing model for nuclear accidents COCO-2, and the UK’s Level-3 Probabilistic Safety Assessment code “PACE” are introduced. Finally, the factors that affect the economic impact of a nuclear accident, especially from a UK standpoint, are described