Multiplicity of Galactic Cepheids from long-baseline interferometry. II. The Companion of AX Circini revealed with VLTI/PIONIER

Aims: We aim at detecting and characterizing the main-sequence companion of the Cepheid AX Cir ($P_\mathrm{orb} \sim$ 18 yrs). The long-term objective is to estimate the mass of both components and the distance to the system. Methods: We used the PIONIER combiner at the VLT Interferometer to obtain the first interferometric measurements of the short-period Cepheid AX Cir and its orbiting component. Results: The companion is resolved by PIONIER at a projected separation $\rho = 29.2 \pm 0.2$ mas and projection angle $PA = 167.6 \pm 0.3^{\circ}$. We measured $H$-band flux ratios between the companion and the Cepheid of $0.90 \pm 0.10$ % and $0.75 \pm 0.17$ %, respectively at a pulsation phase for the Cepheid $\phi = 0.24$ and 0.48. The lower contrast at $\phi = 0.48$ is due to increased brightness of the Cepheid compared to the $\phi = 0.24$. This gives an average apparent magnitude $m\mathrm{_H (comp)} = 9.06 \pm 0.24$ mag. The limb-darkened angular diameter of the Cepheid at the two pulsation phases was measured to be $\theta_\mathrm{LD} = 0.839 \pm 0.023$ mas and $\theta_\mathrm{LD} = 0.742 \pm 0.020$ mas, respectively at $\phi = 0.24$ and 0.48. A lower limit on the total mass of the system was also derived based on our measured separation, we found $M_\mathrm{T} \geq 9.7 \pm 0.6 M_\odot$.Comment: Accepted for publication in Astronomy and Astrophysic

Kalman-filter control schemes for fringe tracking. Development and application to VLTI/GRAVITY

The implementation of fringe tracking for optical interferometers is inevitable when optimal exploitation of the instrumental capacities is desired. Fringe tracking allows continuous fringe observation, considerably increasing the sensitivity of the interferometric system. In addition to the correction of atmospheric path-length differences, a decent control algorithm should correct for disturbances introduced by instrumental vibrations, and deal with other errors propagating in the optical trains. We attempt to construct control schemes based on Kalman filters. Kalman filtering is an optimal data processing algorithm for tracking and correcting a system on which observations are performed. As a direct application, control schemes are designed for GRAVITY, a future four-telescope near-infrared beam combiner for the Very Large Telescope Interferometer (VLTI). We base our study on recent work in adaptive-optics control. The technique is to describe perturbations of fringe phases in terms of an a priori model. The model allows us to optimize the tracking of fringes, in that it is adapted to the prevailing perturbations. Since the model is of a parametric nature, a parameter identification needs to be included. Different possibilities exist to generalize to the four-telescope fringe tracking that is useful for GRAVITY. On the basis of a two-telescope Kalman-filtering control algorithm, a set of two properly working control algorithms for four-telescope fringe tracking is constructed. The control schemes are designed to take into account flux problems and low-signal baselines. First simulations of the fringe-tracking process indicate that the defined schemes meet the requirements for GRAVITY and allow us to distinguish in performance. In a future paper, we will compare the performances of classical fringe tracking to our Kalman-filter control.Comment: 17 pages, 8 figures, accepted for publication in A&

Boosting Biomass Quantity and Quality by Improved Mixotrophic Culture of the Diatom Phaeodactylum tricornutum

Diatoms are photoautotrophic unicellular algae and are among the most abundant, adaptable, and diverse marine phytoplankton. They are extremely interesting not only for their ecological role but also as potential feedstocks for sustainable biofuels and high-value commodities such as omega fatty acids, because of their capacity to accumulate lipids. However, the cultivation of microalgae on an industrial scale requires higher cell densities and lipid accumulation than those found in nature to make the process economically viable. One of the known ways to induce lipid accumulation in Phaeodactylum tricornutum is nitrogen deprivation, which comes at the expense of growth inhibition and lower cell density. Thus, alternative ways need to be explored to enhance the lipid production as well as biomass density to make them sustainable at industrial scale. In this study, we have used experimental and metabolic modeling approaches to optimize the media composition, in terms of elemental composition, organic and inorganic carbon sources, and light intensity, that boost both biomass quality and quantity of P. tricornutum. Eventually, the optimized conditions were scaled-up to 2 L photobioreactors, where a better system control (temperature, pH, light, aeration/mixing) allowed a further improvement of the biomass capacity of P. tricornutum to 12 g/L

The geochemistry of gem opals as evidence of their origin

International audienceSeventy-seven gem opals from ten countries were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) through a dilution process, in order to establish the nature of the impurities. The results are correlated to the mode of formation and physical properties and are instrumental in establishing the geographical origin of a gem opal. The geochemistry of an opal is shown to be dependant mostly on the host rock, at least for examples from Mexico and Brazil, even if modified by weathering processes. In order of decreasing concentration, the main impurities present are Al, Ca, Fe, K, Na, and Mg (more than 500 ppm). Other noticeable elements in lesser amounts are Ba, followed by Zr, Sr, Rb, U, and Pb. For the first time, geochemistry helps to discriminate some varieties of opals. The Ba content, as well as the chondritenormalized REE pattern, are the keys to separating sedimentary opals (BaN110 ppm, Eu and Ce anomalies) from volcanic opals (Bab110 ppm, no Eu or Ce anomaly). The Ca content, and to a lesser extent that of Mg, Al, K and Nb, helps to distinguish gem opals from different volcanic environments. The limited range of concentrations for all elements in precious (play-of-color) compared to common opals, indicates that this variety must have very specific, or more restricted, conditions of formation. We tentatively interpreted the presence of impurities in terms of crystallochemistry, even if opal is a poorly crystallized or amorphous material. The main replacement is the substitution of Si4+ by Al3+ and Fe3+. The induced charge imbalance is compensated chiefly by Ca2+, Mg2+, Mn2+, Ba2+, K+, and Na+. In terms of origin of color, greater concentrations of iron induce darker colors (from yellow to "chocolate brown"). This element inhibits luminescence for concentrations above 1000 ppm, whereas already a low content in U (=1 ppm) induces a green luminescence

Near and mid-IR sub-arcsecond structure of the dusty symbiotic star R Aqr

The results of a high-resolution interferometric campaign targeting the symbiotic long-period variable (LPV) R~Aqr are reported. With both near-infrared measurements on baselines out to 10m and mid-infrared data extending to 32m, we have been able to measure the characteristic sizes of regions from the photosphere of the LPV and its extended molecular atmosphere, out to the cooler circumstellar dust shell. The near-infrared data were taken using aperture masking interferometry on the Keck-I telescope and show R~Aqr to be partially resolved for wavelengths out to 2.2 microns but with a marked enlargement, possibly due to molecular opacity, at 3.1 microns. Mid-infrared interferometric measurements were obtained with the U.C. Berkeley Infrared Spatial Interferometer (ISI) operating at 11.15 microns from 1992 to 1999. Although this dataset is somewhat heterogeneous with incomplete coverage of the Fourier plane and sampling of the pulsation cycle, clear changes in the mid-infrared brightness distribution were observed, both as a function of position angle on the sky and as a function of pulsation phase. Spherically symmetric radiative transfer calculations of uniform-outflow dust shell models produce brightness distributions and spectra which partially explain the data, however limitations to this approximation are noted. Evidence for significant deviation from circular symmetry was found in the mid-infrared and more tentatively at 3.08 microns in the near-infrared, however no clear detection of binarity or of non-LPV elements in the symbiotic system is reported.Comment: Accepted to Astrophysical Journal. To appear in volume 534. 14 pages; 3 postscript figure

A low optical depth region in the inner disk of the HerbigAe star HR5999

Circumstellar disks surrounding young stars are known to be the birthplaces of planets, and the innermost astronomical unit is of particular interest. We present new long-baseline spectro-interferometric observations of the HerbigAe star, HR5999, obtained in the H and K bands with the AMBER instrument at the VLTI, and aim to produce near-infrared images at the sub-AU spatial scale. We spatially resolve the circumstellar material and reconstruct images using the MiRA algorithm. In addition, we interpret the interferometric observations using models that assume that the near-infrared excess is dominated by the emission of a circumstellar disk. We compare the images reconstructed from the VLTI measurements to images obtained using simulated model data. The K-band image reveals three main elements: a ring-like feature located at ~0.65 AU, a low surface brightness region inside, and a central spot. At the maximum angular resolution of our observations (1.3 mas), the ring is resolved while the central spot is only marginally resolved, preventing us from revealing the exact morphology of the circumstellar environment. We suggest that the ring traces silicate condensation, i.e., an opacity change, in a circumstellar disk around HR 5999. We build a model that includes a ring at the silicate sublimation radius and an inner disk of low surface brightness responsible for a large amount of the near-infrared continuum emission. The model successfully fits the SED, visibilities, and closure phases, and provides evidence of a low surface brightness region inside the silicate sublimation radius. This study provides additional evidence that in HerbigAe stars, there is material in a low surface brightness region, probably a low optical depth region, located inside the silicate sublimation radius and of unknown nature.Comment: 11 pages, 10 figure

Up-regulation of endothelial delta-like 4 expression correlates with vessel maturation in bladder cancer.

PURPOSE: Angiogenesis and vascular endothelial growth factor (VEGF) expression are associated with a poor outcome in bladder cancer. To understand more about the mechanisms, we studied the role of delta-like 4 (DLL4), an endothelial-specific ligand of the Notch signaling pathway, in bladder cancer angiogenesis. EXPERIMENTAL DESIGN: The expression of DLL4, CD34, and VEGF were studied in a cohort of 60 bladder tumors and 10 normal samples using quantitative PCR. In situ hybridization was used to study the pattern of DLL4 expression in 22 tumor and 9 normal samples. Serial sections were also stained for CD34 and alpha-smooth muscle actin (alpha-SMA) using conventional immunohistochemistry. RESULTS: The expression of DLL4 was significantly up-regulated in superficial (P < 0.01) and invasive (P < 0.05) bladder cancers. DLL4 expression significantly correlated with CD34 (P < 0.001) and VEGF (P < 0.001) expression. The in situ hybridization studies showed that DLL4 was highly expressed within bladder tumor vasculature. Additionally, DLL4 expression significantly correlated with vessel maturation as judged by periendothelial cell expression of alpha-SMA, 98.7% of DLL4-positive tumor vessels coexpressed alpha-SMA, compared with 64.5% of DLL4-negative tumor vessels (P < 0.001). High DLL4 expression may have prognostic value in superficial and invasive bladder. CONCLUSION: DLL4 expression is associated with vascular differentiation in bladder cancer; thus, targeting DLL4 may be a novel antiangiogenic therapy

Planet Formation Imager (PFI): Introduction and Technical Considerations

Complex non-linear and dynamic processes lie at the heart of the planet formation process. Through numerical simulation and basic observational constraints, the basics of planet formation are now coming into focus. High resolution imaging at a range of wavelengths will give us a glimpse into the past of our own solar system and enable a robust theoretical framework for predicting planetary system architectures around a range of stars surrounded by disks with a diversity of initial conditions. Only long-baseline interferometry can provide the needed angular resolution and wavelength coverage to reach these goals and from here we launch our planning efforts. The aim of the "Planet Formation Imager" (PFI) project is to develop the roadmap for the construction of a new near-/mid-infrared interferometric facility that will be optimized to unmask all the major stages of planet formation, from initial dust coagulation, gap formation, evolution of transition disks, mass accretion onto planetary embryos, and eventual disk dispersal. PFI will be able to detect the emission of the cooling, newly-formed planets themselves over the first 100 Myrs, opening up both spectral investigations and also providing a vibrant look into the early dynamical histories of planetary architectures. Here we introduce the Planet Formation Imager (PFI) Project (www.planetformationimager.org) and give initial thoughts on possible facility architectures and technical advances that will be needed to meet the challenging top-level science requirements.Comment: SPIE Astronomical Telescopes and Instrumentation conference, June 2014, Paper ID 9146-35, 10 pages, 2 Figure

The last gasps of VY CMa: Aperture synthesis and adaptive optics imagery

We present new observations of the red supergiant VY CMa at 1.25 micron, 1.65 micron, 2.26 micron, 3.08 micron and 4.8 micron. Two complementary observational techniques were utilized: non-redundant aperture masking on the 10-m Keck-I telescope yielding images of the innermost regions at unprecedented resolution, and adaptive optics imaging on the ESO 3.6-m telescope at La Silla attaining extremely high (~10^5) peak-to-noise dynamic range over a wide field. For the first time the inner dust shell has been resolved in the near-infrared to reveal a one-sided extension of circumstellar emission within 0.1" (~15 R_star) of the star. The line-of-sight optical depths of the circumstellar dust shell at 1.65 micron, 2.26 micron, and 3.08 micron have been estimated to be 1.86 +/- 0.42, 0.85 +/- 0.20, and 0.44 +/- 0.11. These new results allow the bolometric luminosity of VY~CMa to be estimated independent of the dust shell geometry, yielding L_star ~ 2x10^5 L_sun. A variety of dust condensations, including a large scattering plume and a bow-shaped dust feature, were observed in the faint, extended nebula up to 4" from the central source. While the origin of the nebulous plume remains uncertain, a geometrical model is developed assuming the plume is produced by radially-driven dust grains forming at a rotating flow insertion point with a rotational period between 1200-4200 years, which is perhaps the stellar rotational period or the orbital period of an unseen companion.Comment: 25 pages total with 1 table and 5 figures. Accepted by Astrophysical Journal (to appear in February 1999

The Pulsation of Chi Cygni Imaged by Optical Interferometry; a Novel Technique to Derive Distance and Mass of Mira Stars

We present infrared interferometric imaging of the S-type Mira star Chi Cygni. The object was observed at four different epochs in 2005-2006 with the IOTA optical interferometer (H band). Images show up to 40% variation in the stellar diameter, as well as significant changes in the limb darkening and stellar inhomogeneities. Model fitting gave precise time-dependent values of the stellar diameter, and reveals presence and displacement of a warm molecular layer. The star radius, corrected for limb darkening, has a mean value of 12.1 mas and shows a 5.1mas amplitude pulsation. Minimum diameter was observed at phase 0.94+/-0.01. Maximum temperature was observed several days later at phase 1.02+/-0.02. We also show that combining the angular acceleration of the molecular layer with CO (Delta v = 3) radial velocity measurements yields a 5.9+/-1.5 mas parallax. The constant acceleration of the CO molecules -- during 80% of the pulsation cycle -- lead us to argument for a free-falling layer. The acceleration is compatible with a gravitational field produced by a 2.1(+1.5/-0.7) solar mass star. This last value is in agreement with fundamental mode pulsator models. We foresee increased development of techniques consisting in combining radial velocity with interferometric angular measurements, ultimately allowing total mapping of the speed, density, and position of the diverse species in pulsation driven atmospheres.Comment: 36 pages, accepted in Ap