Induced work function changes at Mg-doped MgO/Ag(001) interfaces: Combined Auger electron diffraction and density functional study

The properties of MgO/Ag(001) ultrathin films with substitutional Mg atoms in the interface metal layer have been investigated by means of Auger electron diffraction experiments, ultraviolet photoemission spectroscopy, and density functional theory (DFT) calculations. Exploiting the layer-by-layer resolution of the MgKL23L23 Auger spectra and using multiple scattering calculations, we first determine the interlayer distances as well as the morphological parameters of the MgO/Ag(001) system with and without Mg atoms incorporated at the interface. We find that the Mg atom incorporation drives a strong distortion of the interface layers and that its impact on the metal/oxide electronic structure is an important reduction of the work function (0.5 eV) related to band-offset variations at the interface. These experimental observations are in very good agreement with our DFT calculations which reproduce the induced lattice distortion and which reveal (through a Bader analysis) that the increase of the interface Mg concentration results in an electron transfer from Mg to Ag atoms of the metallic interface layer. Although the local lattice distortion appears as a consequence of the attractive (repulsive) Coulomb interaction between O2− ions of the MgO interface layer and the nearest positively (negatively) charged Mg (Ag) neighbors of the metallic interface layer, its effect on the work function reduction is only limited. Finally, an analysis of the induced work function changes in terms of charge transfer, rumpling, and electrostatic compression contributions is attempted and reveals that the metal/oxide work function changes induced by interface Mg atoms incorporation are essentially driven by the increase of the electrostatic compression effect

Band bending in Mg-colored and O₂-activated ultrathin MgO(001) films

Ultrathin MgO films grown on Ag(001) have been investigated using X-ray and ultraviolet photoemission spectroscopies for oxide films successively exposed to Mg and O₂ flux. Studying work functions and layer-resolved Auger shifts allows us to keep track of band profiles from the oxide surface to the interface and reveal the charge- transfer mechanisms underlying the controlled creation of Mg-induced surface color centers and the catalytic enhancement of O₂ activation. Our results demonstrate that one can intimately probe the catalytic properties of metal-supported ultrathin oxide films by studying the electronic band alignment at interfaces

Correcting for static shift of magnetotelluric data with airborne electromagnetic measurements: a case study from Rathlin Basin, Northern Ireland

Galvanic distortions of magnetotelluric (MT) data, such as the static-shift effect, are a known problem that can lead to incorrect estimation of resistivities and erroneous modelling of geometries with resulting misinterpretation of subsurface electrical resistivity structure. A wide variety of approaches have been proposed to account for these galvanic distortions, some depending on the target area, with varying degrees of success. The natural laboratory for our study is a hydraulically permeable volume of conductive sediment at depth, the internal resistivity structure of which can be used to estimate reservoir viability for geothermal purposes; however, static-shift correction is required in order to ensure robust and precise modelling accuracy.We present here a possible method to employ frequency–domain electromagnetic data in order to correct static-shift effects, illustrated by a case study from Northern Ireland. In our survey area, airborne frequency domain electromagnetic (FDEM) data are regionally available with high spatial density. The spatial distributions of the derived static-shift corrections are analysed and applied to the uncorrected MT data prior to inversion. Two comparative inversion models are derived, one with and one without static-shift corrections, with instructive results. As expected from the one-dimensional analogy of static-shift correction, at shallow model depths, where the structure is controlled by a single local MT site, the correction of static-shift effects leads to vertical scaling of resistivity–thickness products in the model, with the corrected model showing improved correlation to existing borehole wireline resistivity data. In turn, as these vertical scalings are effectively independent of adjacent sites, lateral resistivity distributions are also affected, with up to half a decade of resistivity variation between the models estimated at depths down to 2000 m. Simple estimation of differences in bulk porosity, derived using Archie's Law, between the two models reinforces our conclusion that the suborder of magnitude resistivity contrasts induced by the correction of static shifts correspond to similar contrasts in estimated porosities, and hence, for purposes of reservoir investigation or similar cases requiring accurate absolute resistivity estimates, galvanic distortion correction, especially static-shift correction, is essential

Prognostic value of the ratio between prothesis area and indexed annulus area measured by multiSlice-CT for transcatheter aortic valve implantation procedures

Background Postprocedural aortic regurgitations following transcatheter aortic valve implantation (TAVI) procedures remain an is- sue. Benefit of oversizing strategies to prevent them isn’t well established. We compared different level of oversizing in our cohort of con- secutive patients to address if severe oversizing compared to normal sizing had an impact on post-procedural outcomes. Methods From January 2010 to August 2013, consecutive patients were referred for TAVI with preoperative Multislice-CT (MSCT) and the procedures were achieved using Edwards Sapien® or Corevalve devices®. Retrospectively, according to pre-procedural MSCT and the valve size, pa- tients were classified into three groups: normal, moderate and severe oversizing; depending on the ratio between the prosthesis area and the annulus area indexed and measured on MSCT. Main endpoint was mid-term mortality and secondary endpoints were the Valve Academic Research Consortium (VARC-2) endpoints. Results Two hundred and sixty eight patients had a MSCT and underwent TAVI procedure, with mainly Corevalve®. While all-cause and cardiovascular mortality rates were similar in all groups, post-procedural new pacemaker (PM) implantation rate was significantly higher in the severe oversizing group (P = 0.03), while we observed more in-hospital congestive heart-failure (P = 0.02) in the normal sizing group. There was a trend toward more moderate to severe aortic regurgitation (AR) in the normal sizing group (P = 0.07). Conclusions Despite a higher rate of PM implantation, oversizing based on this ratio reduces aortic leak with lower rates of post-procedural complications and a similar mid-term survival

Serous cystic neoplasm of the pancreas: A multinational study of 2622 patients under the auspices of the International Association of Pancreatology and European Pancreatic Club (European Study Group on Cystic Tumors of the Pancreas)

OBJECTIVES: Serous cystic neoplasm (SCN) is a cystic neoplasm of the pancreas whose natural history is poorly known. The purpose of the study was to attempt to describe the natural history of SCN, including the specific mortality. DESIGN: Retrospective multinational study including SCN diagnosed between 1990 and 2014. RESULTS: 2622 patients were included. Seventy-four per cent were women, and median age at diagnosis was 58\u2005years (16-99). Patients presented with non-specific abdominal pain (27%), pancreaticobiliary symptoms (9%), diabetes mellitus (5%), other symptoms (4%) and/or were asymptomatic (61%). Fifty-two per cent of patients were operated on during the first year after diagnosis (median size: 40\u2005mm (2-200)), 9% had resection beyond 1\u2005year of follow-up (3\u2005years (1-20), size at diagnosis: 25\u2005mm (4-140)) and 39% had no surgery (3.6\u2005years (1-23), 25.5\u2005mm (1-200)). Surgical indications were (not exclusive) uncertain diagnosis (60%), symptoms (23%), size increase (12%), large size (6%) and adjacent organ compression (5%). In patients followed beyond 1\u2005year (n=1271), size increased in 37% (growth rate: 4\u2005mm/year), was stable in 57% and decreased in 6%. Three serous cystadenocarcinomas were recorded. Postoperative mortality was 0.6% (n=10), and SCN's related mortality was 0.1% (n=1). CONCLUSIONS: After a 3-year follow-up, clinical relevant symptoms occurred in a very small proportion of patients and size slowly increased in less than half. Surgical treatment should be proposed only for diagnosis remaining uncertain after complete workup, significant and related symptoms or exceptionally when exists concern with malignancy. This study supports an initial conservative management in the majority of patients with SCN

Rev-erb-alpha modulates skeletal muscle oxidative capacity by regulating mitochondrial biogenesis and autophagy

The nuclear receptor Rev-erb-α modulates hepatic lipid and glucose metabolism, adipogenesis and the inflammatory response in macrophages. We show here that Rev-erb-α is highly expressed in oxidative skeletal muscle and plays a role in mitochondrial biogenesis and oxidative function, in gain- and loss-of function studies. Rev-erb-α-deficiency in skeletal muscle leads to reduced mitochondrial content and oxidative function, resulting in compromised exercise capacity. This phenotype was recapitulated in isolated fibers and in muscle cells upon Rev-erbα knock-down, while Rev-erb-α over-expression increased the number of mitochondria with improved respiratory capacity. Rev-erb-α-deficiency resulted in deactivation of the Stk11–Ampk–Sirt1–Ppargc1-α signaling pathway, whereas autophagy was up-regulated, resulting in both impaired mitochondrial biogenesis and increased clearance. Muscle over-expression or pharmacological activation of Rev-erb-α increased respiration and exercise capacity. This study identifies Rev-erb-α as a pharmacological target which improves muscle oxidative function by modulating gene networks controlling mitochondrial number and function

Acceleration of generalized hypergeometric functions through precise remainder asymptotics

We express the asymptotics of the remainders of the partial sums {s_n} of the generalized hypergeometric function q+1_F_q through an inverse power series z^n n^l \sum_k c_k/n^k, where the exponent l and the asymptotic coefficients {c_k} may be recursively computed to any desired order from the hypergeometric parameters and argument. From this we derive a new series acceleration technique that can be applied to any such function, even with complex parameters and at the branch point z=1. For moderate parameters (up to approximately ten) a C implementation at fixed precision is very effective at computing these functions; for larger parameters an implementation in higher than machine precision would be needed. Even for larger parameters, however, our C implementation is able to correctly determine whether or not it has converged; and when it converges, its estimate of its error is accurate.Comment: 36 pages, 6 figures, LaTeX2e. Fixed sign error in Eq. (2.28), added several references, added comparison to other methods, and added discussion of recursion stabilit

The course of traumatic pancreatitis in a patient with pancreas divisum: a case report

BACKGROUND: The peculiar anatomy of pancreatic ducts in pancreas divisum (PD) may interfere with the development of acute chronic pancreatitis. In the presented case, PD influenced the evolution of lesions after pancreatic trauma. CASE PRESENTATION: A 38 years old patient refferred to our hospital with recurrent episodes of mild pancreatitis during the last two years. The first episode occurred four months after blunt abdominal trauma. Endoscopic Retrograde Cholangiopancreatography, Magnetic Resonance Imaging of upper abdomen and Magnetic Resonance Cholangiopancreatography disclosed pancreas divisum, changes consistent with chronic pancreatitis in the dorsal pancreatic duct, atrophy in the body and tail of the pancreas and a pseudocyst in the pancreatic head, that was drained endoscopically. CONCLUSION: Pancreas Divisum may interfere with the evolution of posttraumatic changes in the pancreas after blunt abdominal trauma

Experiments performed with bubbly flow in vertical pipes at different flow conditions covering the transition region: Simulation by coupling Eulerian, Lagrangian and 3D random walks models

[EN] Two phase flow experiments with different superficial velocities of gas and water were performed in a vertical upward isothermal cocurrent air-water flow column with conditions ranging from bubbly flow, with very low void fraction, to transition flow with some cap and slug bubbles and void fractions around 25%. The superficial velocities of the liquid and the gas phases were varied from 0.5 to 3 m/s and from 0 to 0.6 m/s, respectively. Also to check the effect of changing the surface tension on the previous experiments small amounts of 1-butanol were added to the water. These amounts range from 9 to 75 ppm and change the surface tension. This study is interesting because in real cases the surface tension of the water diminishes with temperature, and with this kind of experiments we can study indirectly the effect of changing the temperature on the void fraction distribution. The following axial and radial distributions were measured in all these experiments: void fraction, interfacial area concentration, interfacial velocity, Sauter mean diameter and turbulence intensity. The range of values of the gas superficial velocities in these experiments covered the range from bubbly flow to the transition to cap/slug flow. Also with transition flow conditions we distinguish two groups of bubbles in the experiments, the small spherical bubbles and the cap/slug bubbles. Special interest was devoted to the transition region from bubbly to cap/slug flow; the goal was to understand the physical phenomena that take place during this transition A set of numerical simulations of some of these experiments for bubbly flow conditions has been performed by coupling a Lagrangian code, that tracks the three dimensional motion of the individual bubbles in cylindrical coordinates inside the field of the carrier liquid, to an Eulerian model that computes the magnitudes of continuous phase and to a 3D random walk model that takes on account the fluctuation in the velocity field of the carrier fluid that are seen by the bubbles due to turbulence fluctuations. Also we have included in the model the deformation that suffers the bubble when it touches the wall and it is compressed by the forces that pushes it toward the wall, provoking that the bubble rebound like a ball.The authors of this paper are indebted to the National Plan of I+D by the support of the coordinated projects REMOD-ERN ENE2010-21368-C02-01/CON and ENE2010-21368-C02-02/CON to perform the experiments.Muñoz-Cobo, JL.; Chiva, S.; Ali Abdelaziz Essa, M.; Mendez, S. (2012). Experiments performed with bubbly flow in vertical pipes at different flow conditions covering the transition region: Simulation by coupling Eulerian, Lagrangian and 3D random walks models. Archives of Thermodynamics. 33(1):3-39. https://doi.org/10.2478/v10173-012-0001-4S33933