497 research outputs found
Assumed-strain finite element technique for accurate modelling of plasticity problems
In this work a linear hexahedral element based on an assumed-strain finite element technique is presented for the solution of plasticity problems. The element stems from the NICE formulation and its extensions. Assumed gradient operators are derived via nodal integration from the kinematic-weighted residual; the degrees of freedom are only the displacements at the nodes. The adopted constitutive model is the classical associative von-Mises plasticity model with isotropic and kinematic hardening; in particular a double- step midpoint integration algorithm is adopted for the integration and solution of the relevant nonlinear evolution equations. Efficiency of the proposed method is assessed through simple benchmark problem and comparison with reference solutions
Seismic Vulnerability Assessment of a Historical Church: Limit Analysis and Nonlinear Finite Element Analysis
The seismic vulnerability of a historical Basilica church located in Italy is studied by means of limit analysis and nonlinear finite element (FE) analysis. Attention is posed to the failure mechanisms involving the façade of the church and its interaction with the lateral walls. In particular, the limit analysis and the nonlinear FE analysis provide an estimate of the load collapse multiplier of the failure mechanisms. Results obtained from both approaches are in agreement and can support the selection of possible retrofitting measures to decrease the vulnerability of the church under seismic loads
finite element modelling tuned on experimental testing for the structural health assessment of an ancient masonry arch bridge
This paper presents the structural health assessment of a railway ancient masonry arch bridge located in Bologna, Italy. A three-dimensional finite element model of the entire bridge, tuned on in situ experimental tests, has been used for the assessment. In particular, the finite element model has been employed to evaluate the structural health of the bridge both in its actual state and in the hypothesis of a structural strengthening intervention
Modeling environmental ageing in masonry strengthened with composites
The effects of environmental ageing due to rising damp and salt crystallization on composite strengthening systems, e.g. fiber reinforced polymer (FRP) and fiber reinforced cementitious matrix (FRCM), bonded to masonry substrates are still scarcely known. Although few laboratory tests have been recently conducted to this aim, very limited information is available. In this paper, the simulation of accelerated weathering/ageing cycles of masonry strengthened with composites is proposed by means of a multiphase model which accounts for salt transport and crystallization. This multiphase model is implemented together with ad hoc boundary conditions and a restart analysis procedure which attempt to reproduce the repetition of weathering cycles (composed of a wetting phase in a saline solution and a drying phase in the oven). Laboratory accelerated weathering tests on masonry specimens strengthened with lime mortar-based FRCM are numerically reproduced. Additional information on the salt crystallization process within the specimen is obtained along with the weathering procedure. Further numerical insights are shown and compared for different strengthening systems, i.e. cement mortar-based FRCM and FRP. Different salt crystallization patterns in the specimens with different strengthening systems are observed and discussed
A computational multiscale approach to couple hygro-mechanical responses of large-scale masonry walls
We present a computational multiscale approach to the nonlinear problems of humidity diffusion and mechanical damage of large-scale masonry walls, and their coupling in terms of the effects of the humidity diffusion on the mechanical response and the effects of the mechanical degradation on the diffusion process. Such an approach allows us to recover, both efficiently and accurately, the complex nonlinear response of large-scale walls, which are in general hard to be solved by means of standard numerical tools. Two representative tests of two- and three-storey walls are here analyzed, and the corresponding results reported and commented, aiming to show how samples like these can potentially serve as reference solutions for more applicative purposes
Numerical modelling-based damage diagnostics in cultural heritage structures
In this paper, a numerical modelling-based damage diagnostics methodology is proposed for cultural heritage structures (CHSs) made of masonry. Firstly, an integration of 3D documentation data (i.e. point clouds and virtual tours) is developed for the rapid numerical model generation of CHSs. This allows to directly exploit non-comprehensive point clouds (e.g., associated to outer surfaces only) for the solid finite element model generation, where the lacking information is merged with off-site interactive and immersive frameworks. Secondly, a number of nonlinear static and dynamic analyses are conducted on the generated solid model to account for various load scenarios (e.g., earthquakes, soil settlements, etc.), considering a nonlinear continuum constitutive law. Thirdly, a crack pattern matching indicator is introduced to quantitatively identify the most likely load scenario which originated the damage pattern present in the CHS, by comparing numerical and actual crack patterns. The proposed methodology allows to rapidly generate and extract the numerical model that reflects the current (damaged) state of the CHS. This also allows to identify the parts of the CHS susceptible to further damage. The effectiveness of the proposed methodology is promisingly assessed on an actual historical masonry structure, the Morris Island lighthouse in South Carolina (USA)
On the Stability Analysis of a Geometrically Complex Leaning Historic Structure
In this paper, a simple approach for the stability analysis of the southwest leaning ruined tower of the Caerphilly castle (Wales, UK) is discussed. To account for the actual complex geometry of the tower, a mesh generation procedure recently proposed by the authors is used to automatically transform the 3D point cloud surveyed from the tower into a 3D solid finite element model. A simple approach based on nonlinear static analyses is pursued to evaluate the stability condition of the tower. Geometric nonlinearity and nonlinear plastic-damaging behavior of masonry are supposed. Results show that the proposed approach could serve as a simplified method to evaluate the stability of leaning historic structures considering their actual geometry
Characterization of cerebro-cerebellar structural connections using high-quality diffusion MRI data
Experimentally validated methodology for real-time temperature cycle tracking in SiC power modules
© 2018 Elsevier Ltd The ability to monitor temperature variations during the actual operation of power modules is key to reliability investigations and the development of lifetime prediction strategies. This paper proposes an original solution, specifically devised with novel fast-switching silicon carbide (SiC) power MOSFETs in mind. The results show ability to track temperature variations resulting from active power cycling of the devices, including high speed transients, thus enabling to discriminate among different potential failure mechanisms. Validation of the proposed methodology and its accuracy is carried out with the support of infrared thermography
SiC power MOSFETs performance, robustness and technology maturity
Relatively recently, SiC power MOSFETs have transitioned from being a research exercise to becoming an industrial reality. The potential benefits that can be drawn from this technology in the electrical energy conversion domain have been amply discussed and partly demonstrated. Before their widespread use in the field, the transistors need to be thoroughly investigated and later validated for robustness and longer term stability and reliability. This paper proposes a review of commercial SiC power MOSFETs state-of-the-art characteristics and discusses trends and needs for further technology improvements, as well as device design and engineering advancements to meet the increasing demands of power electronics
- …