Effects of open (Racket) and closed (running) skill sports practice on children’s attentional performance

Aims: The first aim of the study was to examine the attentional performance of children (8–13 years of age) who practiced two different sport disciplines: Open skill sport – racket and closed skill sport – running and also to investigate the acute effects of these two specific training sessions on children’s immediate and delayed attentional performance. The second aim of the present study was to verify gender differences in attentional performance. Eighteen children+ (8 girls and 10 boys; age = 10.6 ± 1.5 yrs; height = 144.3 ± 12.2 cm; weight = 44.2 ± 12.5 kg; BMI = 20.8 ± 2.7 kg/m2) engaged in a racket sports and eighteen children (9 girls and 9 boys; age = 9.9 ± 1.2 yrs; height = 142.4 ± 9.5 cm; weight = 40.0 ± 8.6 kg; BMI = 19.6 ± 2.4 kg/m2) engaged in running were enrolled. Methods: Children’s training and experience with these activities averaged 2.3 (± 1.0) years. Children’s attentional capacity was measured before, immediately after and 50 minutes after each specific training session by the d2 test of attention. This paper-and-pencil letter cancellation test evaluated concentration and sustained attention under stress induced by a fixed executing time. A 2 (Sport: open vs closed skill) x 2 (Gender: boys vs girls) x 3 (Time: pre vs 0’ post vs 50’ post) repeated measures ANOVA for time was used to compare the effect of an open skill session and a closed skill session on the individual attentional variables. Results: Children of open skill sport showed higher attentional scores (higher processing speed-TN, higher concentration performance-CP and lower percentage of errors-E%; p < 0.01), improved CP from pre to 0’ post intervention (p = 0.01) and maintained this improved performance at 50’ post intervention (50’ post vs pre; p < 0.01), and decreased E% from pre to 0’ post intervention (p = 0.01) and maintained this improvement at 50’ post intervention (50’ post vs pre; p < 0.001). Children of closed skill sport significantly decreased their CP from pre to 50’ post intervention (50’ post vs pre; p = 0.001 and 50’ post vs 0’ post; p < 0.0001) and worsened their E% across the time (50’ post vs pre; p = 0.001 and 50’ post vs 0’ post; p < 0.0001). Boys showed significantly higher TN values than girls only in closed skill sport (p = 0.023). Finally, all girls of both open and closed skill sports significantly improved their CP from pre to 0’ post intervention (p = 0.04). Conclusion: Results of the study showed that open skill sport practice and training session positively affects children’s attentional performance

The role of parental involvement in youth sport experience: perceived and desired behavior by male soccer players

Parents play a key role in the youth sports educational experience. They are responsible for the introduction of their children to physical or sporting education and their involvement has been associated with sport participation in early stages. The aims of this cross-sectional study were, first, to assess the perceived and desired parental involvement by children and, secondly, to exam-ine their satisfaction or dissatisfaction with any specific behavior. 80 male soccer players filled the Parental Involvement in Sport Questionnaire (PISQ) before or after a training session in presence of a coach. PISQ results revealed excessive active involvement and pressure, insufficient praise and understanding and satisfactory directive behavior from children’s parents. Our findings suggest that excessive parental involvement can cause pressure on children who would prefer parental participation characterized by praise and understanding. A balance between a supporting involvement without putting too much pressure is needed by the parents. To prevent burnout and dropout and to facilitate future practice, parents should be counseled (possibly by a sport educator) on how to positively support their children concerning their sport experience

EU-DEMO divertor: Cassette design and PFCs integration at pre-conceptual stage

The pre-conceptual design of the DEMO divertor cassette with a novelty, alternative path of the main cooling pipes inside cassette body is presented in this paper, focusing on cassette design and Plasma Facing Components (PFC) integration. The divertor cassette design is reviewed, considering recent updates in the DEMO configuration model as presented by the Programme Management Unit (PMU) in 2018. The new configuration requires the cooling pipes to be integrated inside the cassette body. The components affected by these changes and the impact on the divertor design are analyzed. The study focuses on a new integration system between cassette and cooling pipes. The paper describes the integration on the new cassette geometry and the divertor sub-systems. The design activities related to this system are discussed in detail in terms of CAD modeling and considerations with respect to manufacturing such as welding technologies and non-destructive testing

Recurrence quantification analysis of heart rate variability to detect both ventilatory thresholds

Aims of this study were: To verify if Recurrence Quantification Analysis (RQA) of Heart Rate Variability (HRV) time series could determine both ventilatory thresholds in individuals with different fitness levels, and to assess the validity of RQA method compared to gasexchange method (GE). The two thresholds were estimated in thirty young individuals during incremental exercise on cycle-ergometer: Heart rate (HR), Oxygen consumption (VO2) and Workload were measured by the two methods (RQA and GE). Repeated measures ANOVA was used to assess main effects of methods and methods-by-groups interaction effects for HR, VO2 and Workload at aerobic (AerT) and anaerobic (AnT) thresholds. Validity of RQA at both thresholds was assessed for HR, VO2 and Workload by Ordinary Least Products (OLP) regression, Typical Percentage Error (TE), Intraclass Correlation Coefficients (ICC) and the Bland Altman plots. No methods-by-groups interaction effects were detected for HR, VO2 and Workload at AerT and AnT. The OLP analysis showed that at both thresholds RQA and GE methods had very strong correlations (r >0.8) in all variables (HR, VO2 and Workload). Slope and intercept values always included the 1 and the 0, respectively. At AerT the TE ranged from 4.02% (5.48 bpm) to 10.47% (8.53 Watts) (HR and Workload, respectively) and in all variables ICC values were excellent (≥0.85). At AnT the TE ranged from 2.53% (3.98 bpm) to 6.64% (7.81 Watts) (HR and Workload, respectively) and in all variables ICC values were excellent (≥0.90). Therefore, RQA of HRV time series is a new valid approach to determine both ventilatory thresholds in individuals with different physical fitness levels, it can be used when gas analysis is not possible or not convenient

Insulated fixation system of plasma facing components to the divertor cassette in Eurofusion-DEMO

The design activities of an insulated Plasma Facing Components-Cassette Body (PFCs-CB) support has been carried out under the pre-conceptual design phase for Eurofusion-DEMO Work Package DIV-1 \u201cDivertor Cassette Design and Integration\u201d - Eurofusion Power Plant Physics & Technology (PPPT) program. The Eurofusion-DEMO divertor is a key in-vessel component with PFCs which directly interact with the plasma scrape-off layer. The PFCs have to cope with high heat loads, neutron irradiation and electromagnetic loads. The mechanical integrity of the PFCs and water cooling pipes can be jeopardized by high heat loads and by electromagnetic loads generated in a disruption event. In European-DEMO the possibility to estimate the heat load by measuring the relative thermocurrents is under investigation. In order to allow thermocurrents measurements, a divertor design option provides that PFCs are electrically insulated from CB. In this work authors aim to analyze the opportunity that the PFC-CB fixing system incorporates an electrical insulation system, thus acquiring also an important diagnostic role in the measurement of the thermocurrents and in the management of the current flows. The possible use of ceramic material (e.g. alumina) as the insulating layer between the support components is investigated

Postoperative Management of Zygomatic Arch Fractures: In-House Rapid Prototyping System for the Manufacture of Protective Facial Shields

Zygomatic fractures account for 10% to 15% of all facial fractures. The surgical management of isolated zygomatic arch fractures usually requires open reduction treatment without fixation through an intraoral access. Therefore, the main problem in the non-fixed treatment of zygomatic arch fractures is related to the difficulty in obtaining a stable reduction for a period long enough to guarantee the physiological bone healing process. We propose an innovative "in-house" rapid prototyping (RP) protocol for the 3D-zygoma mask manufacture of a patient-specific protective device to apply after zygomatic arch fracture reduction. Our study includes 16 consecutive patients who underwent surgical open reduction for an isolated zygoma fracture without fixation between January 2017 and February 2018. The patients received regular postoperative checks at weeks 1 and 2. Before the device was removed, a multiple choice questionnaire was administered to measure the degree of wearability of the mask. The estimated cost of the production is around &OV0556;5 per case and the construction time is around 90 minutes. Based on the encouraging results, obtained in our experience, we hope that other studies can be conducted to confirm our procedure and improve its functionality in the field of facial trauma

Eurofusion-DEMO Divertor - Cassette Design and Integration

The Eurofusion-DEMO design will complete the Pre Conceptual Design phase (PCD) with a PCD Gate, named G1, scheduled to take place in Q4 2020 that will focus on assessing the feasibility of the plant and its main components prior to entering into the Conceptual Design phase. In the paper first an overview is given of the Eurofusion-DEMO Divertor Assembly including design and interface description, systems and functional requirements, load specification, system classification, manufacturing procedures and cost estimate. Then critical issues are discussed and potential design solutions are proposed, e.g.: - Neutron material damage limits of the different (structural) materials present in the divertor assembly (as CuCrZr, Eurofer) and in the vacuum vessel (AISI 316 L(N)-IG); - Temperature hot spots in parts of the divertor assembly exposed to high nuclear heating and high heat radiation (from the plasma core or the separatrix) causing difficulties for active or passive cooling (e.g. cassette body structure, liner support structures, mechanical supports, divertor toroidal rails); - Arrangement and design of plasma-facing components and liner with pumping slot in the divertor cassette to enable pumping of exhaust gases from the lower port

Vascular risk factors in glaucoma: the results of a national survey

Background The role of vascular risk factors in glaucoma is still being debated. To assess the importance of vascular risk factors in patients with primary open-angle glaucoma (POAG), data from the medical history of 2,879 POAG patients and 973 age-matched controls were collected and analyzed. Methods Design: observational survey. Setting: 35 Italian academic centers. Study population: POAG patients and age-matched controls. In order to reduce bias consecutive patients were included. Observation procedures: data concerning vascular risk factors were collected for all patients with a detailed questionnaire. A complete ophthalmological examination with assessment of intraocular pressure (IOP), visual field, optic disc, and systemic blood pressure was performed. Main outcome measures: the ESH-ESC (European Society of Hypertension-European Society of Cardiology) guidelines were used to calculate the level of cardiovascular risk. Crude and adjusted estimates of the odds ratios (OR) were calculated for all cardiovascular risk factors in POAG and controls. Results The study included 2,879 POAG patients and 973 controls. POAG cases had a significantly higher systolic and diastolic blood pressure (p=0.001) and systolic perfusion pressure (p=0.02) as compared with controls. Also mean IOP was significantly higher in the POAG group (p=0.01), while diastolic perfusion pressure was not significantly different in the two groups. Myopia was more prevalent in the POAG group (23 vs 18%, p=0.005) as well as a positive family history for glaucoma (26 vs 12%, p= 0.004). POAG patients tended to have a higher cardiovascular risk than controls: 63% of glaucoma cases vs 55% of controls (OR: 1.38, p=0.005) had a “high” or “very high” cardiovascular risk. Conclusions The level of cardiovascular risk was significantly higher in glaucoma patients than in controls