351 research outputs found
Recapitulation of selective nuclear import and export with a perfectly repeated 12mer GLFG peptide
The permeability barrier of nuclear pore complexes (NPCs) controls nucleocytoplasmic transport. It retains inert macromolecules while allowing facilitated passage of importins and exportins, which in turn shuttle cargo into or out of cell nuclei. The barrier can be described as a condensed phase assembled from cohesive FG repeat domains. NPCs contain several distinct FG domains, each comprising variable repeats. Nevertheless, we now found that sequence heterogeneity is no fundamental requirement for barrier function. Instead, we succeeded in engineering a perfectly repeated 12mer GLFG peptide that self-assembles into a barrier of exquisite transport selectivity and fast transport kinetics. This barrier recapitulates RanGTPase-controlled importin- and exportin-mediated cargo transport and thus represents an ultimately simplified experimental model system. An alternative proline-free sequence forms an amyloid FG phase. Finally, we discovered that FG phases stain bright with âDNA-specificâ DAPI/ Hoechst probes, and that such dyes allow for a photo-induced block of nuclear transport
Echtzeit-in-situ-Messung der OberflÀchenbelegung einer Magnetron-Kathode bei der reaktiven Sputter-Abscheidung
Reactive Sputtering is a widely used technique in processing of thin compound films. Such films can be sputtered from metal targets, which are comparatively cost efficient. Also the fact that sputtering from metal targets can ccur in the dc mode reduces the cost of the sputtering equipment. To keep the deposition process stable, its necessary to know the effects of target poisoning including its hyteresis behavior. The aim of this work was to nvestigate the evolution of reactive gas coverage on a titanium magnetron target surface, by real time, in-situ ion beam analysis during magnetron sputtering. A cylindrical 2 inch magnetron was used for reactive sputtering of TiN. It was operated in an Ar/N2 gas mixture at achamber pressure of about 3â10-3 mbar. The argon/nitrogen flux ratio was variated between 0 and 20%. The nitrogen concentration on the target was determinated using the 14N(d, α)12C, nuclear reaction at a deuterium beam energy of 1.8 MeV. Depending on the adjusted nitrogen flow the target incorporation varies between 0 and about 1â1016 Nâcm-2. Further the expected hysteresis behaviour ofnitrogen partial pressure, target voltage and nitrogen concentration at increasing/decreasing nitrogen gas flow is confirmed. The lateral distribution of nitrogen was measured across the diameter of target surface. In the zone of higher erosion (the \"race track\") the nitrogen concentration is 50% lower than in the middle or the edge of the target. A deposition zone in the center of the target could not be detected. By increasing the nitrogen flow into the chamber a saturation in nitrogen content in the target was found at an Ar/N2 flow ratio of about 10%. Assuming nitrogen implantation with a depth of 2.5 nm under the influence of typical target voltage during magnetron sputtering, this saturation is at a concentration value where stoichiomtric TiN is formed. Within the precision of the measurements, a mobile fraction of nitrogen could not determined. The concentration in the target remains unchanged after switching off the magnetron
Compositional, structural and morphological modifications of N-rich Cu3N films induced by irradiation with Cu at 42 MeV
N-rich Cu3N films were irradiated with Cu at 42 MeV in the fluences range from 4 Ă 1011 to 1 Ă 1014 cmâ2. The radiation-induced changes in the chemical composition, structural phases, surface morphology and optical properties have been characterized as a function of ion fluence, substrate temperature and angle of incidence of the incoming ion by means of ion-beam analysis (IBA), x-ray diffraction, atomic force microscopy, profilometry and Fourier transform infrared spectroscopy techniques. IBA methods reveal a very efficient sputtering of N whose yield (5 Ă 103 atom/ion) is almost independent of substrate temperature (RT-300 °C) but slightly depends on the incidence angle of the incoming ion. The Cu content remains essentially constant within the investigated fluence range. All data suggest an electronic mechanism to be responsible for the N depletion. The release of nitrogen and the formation of Cu2O and metallic Cu are discussed on the basis of existing models
Collisions of small ice particles under microgravity conditions - II. Does the chemical composition of the ice change the collisional properties?
Context. Understanding the collisional properties of ice is important for understanding both the early stages of planet formation and the evolution of planetary ring systems. Simple chemicals such as methanol and formic acid are known to be present in cold protostellar regions alongside the dominant water ice; they are also likely to be incorporated into planets which form in protoplanetary disks, and planetary ring systems. However, the effect of the chemical composition of the ice on its collisional properties has not yet been studied.Aims. Collisions of 1.5 cm ice spheres composed of pure crystalline water ice, water with 5% methanol, and water with 5% formic acid were investigated to determine the effect of the ice composition on the collisional outcomes.Methods. The collisions were conducted in a dedicated experimental instrument, operated under microgravity conditions, at relative particle impact velocities between 0.01 and 0.19 ms-1, temperatures between 131 and 160 K and a pressure of around 10-5Results. A range of coefficients of restitution were found, with no correlation between this and the chemical composition, relative impact velocity, or temperature.Conclusions. We conclude that the chemical composition of the ice (at the level of 95% water ice and 5% methanol or formic acid) does not affect the collisional properties at these temperatures and pressures due to the inability of surface wetting to take place. At a level of 5% methanol or formic acid, the structure is likely to be dominated by crystalline water ice, leading to no change in collisional properties. The surface roughness of the particles is the dominant factor in explaining the range of coefficients of restitution
Serum prolactin as a biomarker for the study of intracerebral dopamine effect in adult patients with phenylketonuria: a cross-sectional monocentric study
BACKGROUND: It has been previously postulated that high phenylalanine (Phe) might disturb intracerebral dopamine production, which is the main regulator of prolactin secretion in the pituitary gland. Previously, various associations between Phe and hyperprolactinemia were revealed in studies performed in phenylketonuria (PKU) children and adolescents. The aim of the present study was to clarify whether any relation between serum phenylalanine and prolactin levels can be found in adult PKU patients. PATIENTS AND METHODS: We conducted a cross-sectional, monocentric study including 158 adult patients (male n = 68, female n = 90) with PKU. All patients were diagnosed during newborn screening and were treated since birth. Serum Phe, tyrosine (Tyr), prolactin (PRL), and thyroid-stimulating hormone (TSH) levels were measured, and Phe/Tyr ratio was calculated. Males and females were analyzed separately because the serum prolactin level is gender-dependent. RESULTS: No significant correlations were found between serum phenylalanine, tyrosine, or the Phe/Tyr ratio and serum prolactin level either in the male or in the female group. CONCLUSIONS: In treated adult PKU patients, the serum prolactin level may not be significantly influenced by Phe or Tyr serum levels
Neutralization of SARS-CoV-2 by highly potent, hyperthermostable, and mutation-tolerant nanobodies
Monoclonal anti-SARS-CoV-2 immunoglobulins represent a treatment option for COVID-19. However, their production in mammalian cells is not scalable to meet the global demand. Single-domain (VHH) antibodies (also called nanobodies) provide an alternative suitable for microbial production. Using alpaca immune libraries against the receptor-binding domain (RBD) of the SARS-CoV-2 Spike protein, we isolated 45 infection-blocking VHH antibodies. These include nanobodies that can withstand 95°C. The most effective VHH antibody neutralizes SARS-CoV-2 at 17â50 pM concentration (0.2â0.7 ”g per liter), binds the open and closed states of the Spike, and shows a tight RBD interaction in the X-ray and cryo-EM structures. The best VHH trimers neutralize even at 40 ng per liter. We constructed nanobody tandems and identified nanobody monomers that tolerate the K417N/T, E484K, N501Y, and L452R immune-escape mutations found in the Alpha, Beta, Gamma, Epsilon, Iota, and Delta/Kappa lineages. We also demonstrate neutralization of the Beta strain at low-picomolar VHH concentrations. We further discovered VHH antibodies that enforce native folding of the RBD in the E. coli cytosol, where its folding normally fails. Such âfold-promotingâ nanobodies may allow for simplified production of vaccines and their adaptation to viral escape-mutations
From hidden-order to antiferromagnetism: electronic structure changes in Fe-doped URuSi
In matter, any spontaneous symmetry breaking induces a phase transition
characterized by an order parameter, such as the magnetization vector in
ferromagnets, or a macroscopic many-electron wave-function in superconductors.
Phase transitions with unknown order parameter are rare but extremely
appealing, as they may lead to novel physics. An emblematic, and still
unsolved, example is the transition of the heavy fermion compound URuSi
(URS) into the so-called hidden-order (HO) phase when the temperature drops
below K. Here we show that the interaction between the heavy
fermion and the conduction band states near the Fermi level has a key role in
the emergence of the HO phase. Using angle resolved photoemission spectroscopy,
we find that while the Fermi surfaces of the HO and of a neighboring
antiferromagnetic (AFM) phase of well-defined order parameter have the same
topography, they differ in the size of some, but not all, of their electron
pockets. Such a non-rigid change of the electronic structure indicates that a
change in the interaction strength between states near the Fermi level is a
crucial ingredient for the HO-to-AFM phase transition.Comment: 23 pages, 14 figures, 1 ancillary movi
Light scattering and trapping in different thin film photovoltaic device
Light trapping in different thin film technologies is investigated in the context of the European integrated project ATHLET since it allows for thinner devices and thus for reduction of costs for absorber material preparation as well as for advanced multi-junction solar cells. In silicon technology, rough interfaces are typically introduced by roughening of substrates, transparent conducting oxides (TCOs) and/or reflectors at the back side to scatter the light into the absorber material. Well known rough TCOs, plasma-textured poly-Si as well as rough Cu(In,Ga)Se2 (CIGS) absorbers are used as source for light scattering in microcrystalline silicon solar cells and compared regarding their surface roughness. The results prove that CIGS and poly silicon solar cells provide efficient light scattering by the surface features of the rough absorber
- âŠ