Aerial Spray Deposition on Corn Silks Applied at High and Low Spray Rates

 Corn earworm is a major pest of sweet corn, especially when grown organically. Aerial application of insecticides is important for both conventionally- and organically-grown sweet corn production as sweet corn is frequently irrigated to assure return on investment given the high production costs. Aerial insecticide application costs can be minimized through use of reduced spray rates if insecticide efficacy can be maintained at the lower spray rates. The objectives of the study were to characterize deposition on field corn silks when applied at 47.9 L/ha (with VMDs at 230 and 400 μm) and 86.2 L/ha (with VMD at 400 μm) spray rates. Applications of the bioinsecticide, Gemstar®, and the insecticide, Entrust®, which are both approved for use in organic production, were made over three different fields. The amount of spray material deposited on individual silks for each treatment was determined. Deposition of spray material on the silks was very similar across all application treatments. Overall, the 86.2 L/ha rate resulted in the greatest deposition of active material on the corn silks. At the 47.9 L/ha rate, the smaller droplet size sprays resulted in less deposition than the other treatments

Air and Spray Mixture Temperature Effects on Atomization of Agricultural Sprays

spray drift associated with agrochemical operations is highly dependent upon the physical properties of the spray solution with respect to how they influence atomization.  This study examined two spray solutions across a wide range of solution temperatures for two nozzles spraying into two high speed airstreams.  The dynamic surface tension and viscosity of the spray solutions were also measured across the range of temperatures.  Generally as the solution temperature increased, the dynamic surface tension and viscosity both decreased.  This decrease in physical properties was directly related to the decrease in spray droplet size for all nozzles and airspeeds tested.  Monitoring of spray solution temperature throughout the spray system of a typical agricultural aircraft demonstrated that while changes in the spray solutions temperature do occur, the range is much less than the ranges across which this atomization study covered.  During a typical aerial application scenario, the temperature of a spray solution and the associated physical properties and atomization characteristics would not be expected to see significant variation

Western corn rootworm pyrethroid resistance confirmed by aerial application simulations of commercial insecticides

The western corn rootworm (Diabrotica virgifera virgifera LeConte) (WCR) is a major insect pest of corn (Zea mays L.) in the United States (US) and is highly adaptable to multiple management tactics. A low level of WCR field-evolved resistance to pyrethroid insecticides has been confirmed in the US western Corn Belt by laboratory dose-response bioassays. Further investigation has identified detoxification enzymes as a potential part of the WCR resistance mechanism, which could affect the performance of insecticides that are structurally related to pyrethroids, such as organophosphates. Thus, the responses of pyrethroid-resistant and -susceptible WCR populations to the commonly used pyrethroid bifenthrin and organophosphate dimethoate were compared in active ingredient bioassays. Results revealed a relatively low level of WCR resistance to both active ingredients. Therefore, a simulated aerial application bioassay technique was developed to evaluate how the estimated resistance levels would affect performance of registered rates of formulated products. The simulated aerial application technique confirmed pyrethroid resistance to formulated rates of bifenthrin whereas formulated dimethoate provided optimal control. Results suggest that the relationship between levels of resistance observed in dose-response bioassays and actual efficacy of formulated product needs to be further explored to understand the practical implications of resistance

Development and prospect of unmanned aerial vehicle technologies for agricultural production management

Unmanned aerial vehicles have been developed and applied to support agricultural production management. Compared with piloted aircraft, an Unmanned Aerial Vehicle (UAV) can focus on small crop fields at lower flight altitudes than regular aircraft to perform site-specific farm management with higher precision. They can also “fill in the gap” in locations where fixed winged or rotary winged aircraft are not readily available. In agriculture, UAVs have primarily been developed and used for remote sensing and application of crop production and protection materials. Application of fertilizers and chemicals is frequently needed at specific times and locations for site-specific management. Routine monitoring of crop plant health is often required at very high resolution for accurate site-specific management as well. This paper presents an overview of research involving the development of UAV technology for agricultural production management. Technologies, systems and methods are examined and studied. The limitations of current UAVs for agricultural production management are discussed, as well as future needs and suggestions for development and application of the UAV technologies in agricultural production management

Droplet size and nozzle tip pressure from a pulse-width modulation sprayer

Pulse-width modulation (PWM) sprayers can improve application accuracy through flow control, turn compensation, and high-resolution overlap control by pulsing an electronically-actuated solenoid valve which controls the relative proportion of time each solenoid valve is open (duty cycle). The objective of this experiment was to identify the droplet size distribution and nozzle tip pressure when influenced by PWM duty cycle, nozzle technology, and gauge pressure to provide PWM guidelines. The experiment was conducted in a low-speed wind tunnel at the Pesticide Application Technology Laboratory using a SharpShooter® PWM system. In general, for non-venturi nozzles, as duty cycle decreased, droplet size slightly increased between 40 and 100% duty cycles. Conversely, venturi nozzles did not always follow this trend. The lowest duty cycle evaluated (20%) negatively impacted droplet size and caused inconsistencies for all nozzle by pressure combinations. The addition of a solenoid valve lowered nozzle tip pressure while gauge pressure remained constant indicating a restriction is present within the solenoid valve. Greater orifice sizes increased the pressure loss observed. Duty cycle minimally impacted nozzle tip pressure trends which were similar to the electrical square wave PWM signals. However, venturi nozzles deviated from this trend, specifically twin-fan, single pre-orifice venturi nozzles. In conclusion, venturi nozzles are not recommended for PWM systems as they may lead to inconsistent applications, specifically in regards to droplet size generation and nozzle tip pressures. Spray pressures of 276 kPa or greater and PWM duty cycles of 40% or greater are recommended to ensure proper PWM operation

Western corn rootworm pyrethroid resistance confirmed by aerial application simulations of commercial insecticides

The western corn rootworm (Diabrotica virgifera virgifera LeConte) (WCR) is a major insect pest of corn (Zea mays L.) in the United States (US) and is highly adaptable to multiple management tactics. A low level of WCR field-evolved resistance to pyrethroid insecticides has been confirmed in the US western Corn Belt by laboratory dose-response bioassays. Further investigation has identified detoxification enzymes as a potential part of the WCR resistance mechanism, which could affect the performance of insecticides that are structurally related to pyrethroids, such as organophosphates. Thus, the responses of pyrethroid-resistant and -susceptible WCR populations to the commonly used pyrethroid bifenthrin and organophosphate dimethoate were compared in active ingredient bioassays. Results revealed a relatively low level of WCR resistance to both active ingredients. Therefore, a simulated aerial application bioassay technique was developed to evaluate how the estimated resistance levels would affect performance of registered rates of formulated products. The simulated aerial application technique confirmed pyrethroid resistance to formulated rates of bifenthrin whereas formulated dimethoate provided optimal control. Results suggest that the relationship between levels of resistance observed in dose-response bioassays and actual efficacy of formulated product needs to be further explored to understand the practical implications of resistance

Droplet Size Impact on Efficacy of a Dicamba-plus-Glyphosate Mixture

Chemical weed control remains a widely used component of integrated weed management strategies because of its cost-effectiveness and rapid removal of crop pests. Additionally, dicamba-plus-glyphosate mixtures are a commonly recommended herbicide combination to combat herbicide resistance, specifically in recently commercially released dicamba-tolerant soybean and cotton. However, increased spray drift concerns and antagonistic interactions require that the application process be optimized to maximize biological efficacy while minimizing environmental contamination potential. Field research was conducted in 2016, 2017, and 2018 across three locations (Mississippi, Nebraska, and North Dakota) for a total of six site-years. The objectives were to characterize the efficacy of a range of droplet sizes [150 μm (Fine) to 900 μm (Ultra Coarse)] using a dicamba-plus-glyphosate mixture and to create novel weed management recommendations utilizing pulse-width modulation (PWM) sprayer technology. Results across pooled site-years indicated that a droplet size of 395 μm (Coarse) maximized weed mortality from a dicamba-plus-glyphosate mixture at 94 L ha–1. However, droplet size could be increased to 620 μm (Extremely Coarse) to maintain 90% of the maximum weed mortality while further mitigating particle drift potential. Although generalized droplet size recommendations could be created across site-years, optimum droplet sizes within each site-year varied considerably and may be dependent on weed species, geographic location, weather conditions, and herbicide resistance(s) present in the field. The precise, site-specific application of a dicamba-plus-glyphosate mixture using the results of this research will allow applicators to more effectively utilize PWM sprayers, reduce particle drift potential, maintain biological efficacy, and reduce the selection pressure for the evolution of herbicide-resistant weeds

CLASH-VLT: The stellar mass function and stellar mass density profile of the z=0.44 cluster of galaxies MACS J1206.2-0847

Context. The study of the galaxy stellar mass function (SMF) in relation to the galaxy environment and the stellar mass density profile, rho(r), is a powerful tool to constrain models of galaxy evolution. Aims. We determine the SMF of the z=0.44 cluster of galaxies MACS J1206.2-0847 separately for passive and star-forming (SF) galaxies, in different regions of the cluster, from the center out to approximately 2 virial radii. We also determine rho(r) to compare it to the number density and total mass density profiles. Methods. We use the dataset from the CLASH-VLT survey. Stellar masses are obtained by SED fitting on 5-band photometric data obtained at the Subaru telescope. We identify 1363 cluster members down to a stellar mass of 10^9.5 Msolar. Results. The whole cluster SMF is well fitted by a double Schechter function. The SMFs of cluster SF and passive galaxies are statistically different. The SMF of the SF cluster galaxies does not depend on the environment. The SMF of the passive population has a significantly smaller slope (in absolute value) in the innermost (<0.50 Mpc), highest density cluster region, than in more external, lower density regions. The number ratio of giant/subgiant galaxies is maximum in this innermost region and minimum in the adjacent region, but then gently increases again toward the cluster outskirts. This is also reflected in a decreasing radial trend of the average stellar mass per cluster galaxy. On the other hand, the stellar mass fraction, i.e., the ratio of stellar to total cluster mass, does not show any significant radial trend. Conclusions. Our results appear consistent with a scenario in which SF galaxies evolve into passive galaxies due to density-dependent environmental processes, and eventually get destroyed very near the cluster center to become part of a diffuse intracluster medium.Comment: A&A accepted, 15 pages, 13 figure

CLASH: Photometric redshifts with 16 HST bands in galaxy cluster fields

The Cluster Lensing And Supernovae survey with Hubble (CLASH) is an Hubble Space Telescope (HST) Multi-Cycle Treasury program observing 25 massive galaxy clusters. CLASH observations are carried out in 16 bands from UV to NIR to derive accurate and reliable estimates of photometric redshifts. We present the CLASH photometric redshifts and study the photometric redshift accuracy of the arcs in more detail for the case of MACS1206.2-0847. We use the publicly available Le Phare and BPZ photometric redshift codes on 17 CLASH galaxy clusters. Using Le Phare code for objects with StoN>=10, we reach a precision of 3%(1+z) for the strong lensing arcs, which is reduced to 2.4%(1+z) after removing outliers. For galaxies in the cluster field the corresponding values are 4%(1+z) and 3%(1+z). Using mock galaxy catalogues, we show that 3%(1+z) precision is what one would expect from the CLASH photometry when taking into account extinction from dust, emission lines and the finite range of SEDs included in the photo-z template library. We study photo-z results for different aperture photometry and find that the SExtractor isophotal photometry works best. Le Phare and BPZ give similar photo-z results for the strong lensing arcs as well as galaxies of the cluster field. Results are improved when optimizing the photometric aperture shape showing an optimal aperture size around 1" radius giving results which are equivalent to isophotal photometry. Tailored photometry of the arcs improve the photo-z results.Comment: Accepted in A&A on nov 201