177 research outputs found
A simple HPLC-DAD method for the analysis of melamine in protein supplements: validation using the accuracy profiles.
The study presents a fully validated simple high-performance liquid chromatography method with diode array detection (HPLC-DAD), able to accurately determine the melamine, fraudulently added, in protein supplements, commonly used from healthy adults to enhance exercise or sport performance. The validation strategy was intentionally oriented towards routine use and the reliability of the method rather than extreme performance. For this reason, validation by accuracy profile, including estimation of uncertainty, was chosen. This procedure, based on the concept of total error (bias + standard deviation), clearly showed that this method was able to determine melamine over the range of 0.05–3.0 mg Kg−1, selected by taking into account the maximum residue levels (MRLs) proposed by European legislation to distinguish between the unavoidable background presence of melamine and unacceptable adulteration. The accuracy profile procedure established that at least 95% of the future results obtained with the proposed method would be within the ±15% acceptance limits of the validated HPLC-DAD method over the whole defined concentration range
GC-MS analysis of the essential oils of Juniperus communis L. berries growing wild in the Molise region: Seasonal variability and in vitro antifungal activity
Campi Flegrei active seismic experiments waveforms compilation
A new experiment called SERAPIS (SEismic Reflection/Refraction
Acquisition Project for Imaging complex volcanic Structures) has been planned
and carried out, based on off-shore seismic energization and data acquisition on
land and on sea-bottom. The experiment was performed in September, 2001
during which the vessel NADIR of IFREMER (equipped with 12, 16-liters airgun)
produced more than 5000 air gun shots recorded at a sea-bottom seismograph
array of 72 OBS and 62 stations installed on-land. Active seismic refraction
DSS (Deep Seismic Soundings) acquired during the surveys conducted in
1980 and 1985 were recovered jointly with seismic data acquired in the Campi
Flegrei area in the framework of the MareVes97 (an experiment devoted to the
definition of the structure of the Somma-Vesuvio complex) offshore survey.
The data set acquired during the SERAPIS experiment has been successfully
used to infer 3D images of the volcanic structures of Campi Flegrei and
Neapolitan bay. Active seismic waveforms and related P-picks (more than
90000 data) from the SERAPIS experiment are also available in the project data
server
2D seismic tomography of Somma-Vesuvius: Description of the experiment and preliminary results
A multidisciplinary project for the investigation of Mt. Vesuvius structure was started in 1993. The core of the project is represented by a high resolution seismic tomography study by using controlled and natural sources. The main research objective is to investigate the feeding system of the volcano and to retrieve details of the upper crustal structure in the area. A first 2D active seismic experiment was performed in May 1994, with the aim of studing the feasibility of using tomographic techniques for exploring the volcano interiors. Particularly, this experiment was designed to obtain information on the optimal sources-receivers configuration and on the depth extension of the volume sampled by shot-generated seismic waves. 66 three-component seismic stations and 16 single-component analogue instruments were installed by several Italian and French groups to record signals generated by three on-land, underground explosions. Sources and geophones were deployed along a 30-km NW-SE profile passing through the volcano crater. Receivers were placed at an average spacing of 250 m in the middle of the recording line and at 500 m outside. The arrival time data base was complemented by first P and S readings of microearthquakes which occurred in the recent past within the volcano. The first arrival data set was preliminarily used to determine the shallow structure of the volcano by applying Thurber's (1983) tomographic inversion technique. This analysis shows evidence for a high-velocity body which extends vertically from about 400 m below the crater down to at least 3000 m and for a shallow 300-500 m thick low-velocity cover which borders the edifice. Data from the distant shot show evidence for arrivals of deep reflected/converted phases and provide information on the deeper structure under the volcano. The results from the interpretation of 2D data are used for planning a 3D tomographic survey which will be carried out in 1996
Electromechanical and robotic devices for gait and balance rehabilitation of children with neurological disability: a systematic review
In the last two decades, a growing interest has been focused on gait and balance robot-assisted rehabilitation in children with neurological disabilities. Robotic devices allow the implementation of intensive, task-specific training fostering functional recovery and neuroplasticity phenomena. However, limited attention has been paid to the protocols used in this research framework. This systematic review aims to provide an overview of the existing literature on robotic systems for the rehabilitation of gait and balance in children with neurological disabilities and their rehabilitation applications. The literature search was carried out independently and synchronously by three authors on the following databases: MEDLINE, Cochrane Library, PeDro, Institute of Electrical and Electronics Engineers, ScienceDirect, and Google Scholar. The data collected included three subsections referring to clinical, technical, and regulatory aspects. Thirty-one articles out of 81 found on the primary literature search were included in the systematic review. Most studies involved children with cerebral palsy. Only one-third of the studies were randomized controlled trials. Overall, 17 devices (nine end-effector systems and eight exoskeletons) were investigated, among which only 4 (24%) were bore the CE mark. Studies differ on rehabilitation protocols duration, intensity, and outcome measures. Future research should improve both rehabilitation protocols\u2019 and devices\u2019 descriptions
The process of creative construction: knowledge spillovers, entrepreneurship, and economic growth
A Project Portfolio Management Approach to Tacklingthe Exploration/Exploitation Trade-off
Organizational ambidexterity (OA) is an essen-tial capability for surviving in dynamic business environ-ments that advocates the simultaneous engagement inexploration and exploitation. Over the last decades,knowledge on OA has substantially matured, coveringinsights into antecedents, outcomes, and moderators of OA.However, there is little prescriptive knowledge that offersguidance on how to put OA into practice and to tackle thetrade-off between exploration and exploitation. To addressthis gap, the authors adopt the design science researchparadigm and propose an economic decision model asartifact. The decision model assists organizations inselecting and scheduling exploration and exploitation pro-jects to become ambidextrous in an economically reason-able manner. As for justificatory knowledge, the decisionmodel draws from prescriptive knowledge on projectportfolio management and value-based management, andfrom descriptive knowledge related to OA to structure thefield of action. To evaluate the decision model, its designspecification is discussed against theory-backed designobjectives and with industry experts. The paper alsoinstantiates the decision model as a software prototype andapplies the prototype to a case based on real-world data
Isolamento e caratterizzazione strutturale di metaboliti secondari bioattivi da organismi marini e vegetali
- …