Differential Mobility Spectrometry Coupled with Multiple Ion Monitoring in Regulated LC-MS/MS Bioanalysis of a Therapeutic Cyclic Peptide in Human Plasma

A differential mobility spectrometry (DMS) in combination with a multiple ion monitoring (MIM) method was developed and validated for quantitative LC-MS/MS bioanalysis of pasireotide (SOM230) in human plasma. Pasireotide, a therapeutic cyclic peptide, exhibits poor collision-induced dissociation (CID) efficiency for multiple reaction monitoring (MRM) detection. Therefore, in an effort to increase the overall sensitivity of the assay, a DMS-MIM approach was explored. By selecting the most abundant doubly charged precursor ion in both the Q1 and Q3 of the mass analyzer in MIM and combining the DMS capability to significantly reduce the high matrix/chemical background noise, this new LC-DMS-MIM method overcomes the sensitivity challenge in the typical MRM method due to poor CID fragmentation of the analyte. Human plasma was spiked with pasireotide with concentrations in the range 0.01–50 ng/mL. Weak cation-exchange solid-phase extraction was employed for sample preparation. The sample extracts were analyzed with a SCIEX QTRAP 6500 system equipped with an ESI source and DMS device. The separation voltage and compensation voltage of the DMS and other parameters of the MS system were optimized to maximize signal responses. The performance of the LC-DMS-MIM assay for quantitative analysis of pasireotide in human plasma was evaluated and compared to those obtained via LC-MRM and LC-MIM without DMS. Overall, the assay sensitivity with DMS-MIM was approximately 5-fold better than that observed in MRM or MIM without DMS. The assay was validated with accuracy (% bias) and precision (% CV) of the QC results at eight concentration levels (0.01, 0.02, 0.05, 0.15, 0.3, 1.5, 15, and 37.5 ng/mL) evaluated ranging from −4.8 to 5.0% bias and 0.7 to 8.6% CV for the intraday and interday runs. The current LC-DMS-MIM workflow can be expanded to quantitative analysis of other molecules that have poor fragmentation efficiency in CID

Deep Underground Neutrino Experiment (DUNE) Near Detector Conceptual Design Report

International audienceThe Deep Underground Neutrino Experiment (DUNE) is an international, world-class experiment aimed at exploring fundamental questions about the universe that are at the forefront of astrophysics and particle physics research. DUNE will study questions pertaining to the preponderance of matter over antimatter in the early universe, the dynamics of supernovae, the subtleties of neutrino interaction physics, and a number of beyond the Standard Model topics accessible in a powerful neutrino beam. A critical component of the DUNE physics program involves the study of changes in a powerful beam of neutrinos, i.e., neutrino oscillations, as the neutrinos propagate a long distance. The experiment consists of a near detector, sited close to the source of the beam, and a far detector, sited along the beam at a large distance. This document, the DUNE Near Detector Conceptual Design Report (CDR), describes the design of the DUNE near detector and the science program that drives the design and technology choices. The goals and requirements underlying the design, along with projected performance are given. It serves as a starting point for a more detailed design that will be described in future documents

Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC

DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6 $\times$ 6 $\times$ 6 m$^3$ liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019–2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties.DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties

Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora

International audienceThe Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation

Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network

International audienceLiquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on experimental data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between experimental data and simulation