Space charge behaviour in epoxy laminates under high constant electric field

The development of space charge in insulating materials is one of the main causes of their electrical ageing. The pulsed electro-acoustic method is often used to determine space charge distribution, but the signal analysis in the case of laminate structures is much more complex to analyse. In this paper the authors describe and use a simulated signal in order to study laminates made of epoxy resin and fibre mat. The relatively large conductivity of the fibres compared with that of the resin seems to produce a rapid charge dissociation and recombination in the fibres. Under voltage the presence of fibres close to an electrode seems to promote charge injection

An examination of business occupier relocation decision making : distinguishing small and large firm behaviour

This paper explores how business occupiers decide whether and where to relocate. It captures the experience and behaviour of a range of sizes and types of business occupier and subjects their decision-making processes to detailed scrutiny. A linear three-stage decision model is used to sequence and structure interviews with individuals who have intimate involvement with the relocation of 28 firms and organizations in Tyne and Wear, in the north-east of England. The 'constant comparative' method is used to analyse the interview data, from which emerges 18 key concepts, comprising 51 characteristic components. Using an axial approach, these are organized into 10 cross-cutting themes that represent the main areas of consideration or influence on the thinking of the people involved in determining whether a firm or organization should relocate and, if so, where to. The resulting analysis finds that organizations adopt varying degrees of sophistication when making relocation decisions; small firms are more inclined to make decisions based on constrained information; larger organizations adopt a more complex approach. Regardless of firm size, key individuals exert considerable influence over the decision-making process and its outcome

A Protocol for Space Charge Measurements in Full-size HVDC Extruded Cables

This position paper, prepared by the IEEE DEIS HVDC Cable Systems Technical Committee, illustrates a protocol recommended for the measurement of space charges in full-size HVDC extruded cables during load cycle qualification tests (either prequalification load cycles or type test load cycles). The protocol accounts for the experimental practices of space charge measurements in the thick insulation of coaxial cables in terms of poling time, depolarization time, heating and cooling of specimens, as well as for the experience gained very recently from such kind of measurements performed in the framework of qualification tests relevant to ongoing HVDC cable system projects. The goal of the protocol is not checking the compliance with any maximum acceptable limit of either space charge or electric field. Rather, this protocol aims at assessing the variation of the electric field profile in the cable insulation wall during poling time at the beginning and at the end of load cycle qualification tests for full-size HVDC extruded cables. Indeed, in the design stage the electric field distributions are determined by the cable geometry and by temperature gradient in the insulation. Thus, the design is based on macroscopic parameters conductivity and permittivity and how they depend upon temperature. Any disturbance of the electric field due to space charge accumulation will only be revealed during space charge measurements either in as-manufactured state or in the aged state after load cycle qualification tests

The Insulation of HVDC Extruded Cable System Joints. Part 1: Review of Materials, Design and Testing Procedures

This position paper by the DEIS HVDC Cable Systems Technical Committee provides a review of existing diagnostic electrical and dielectric techniques for testing the insulation of polymeric extruded HVDC cable joints in the present Part 1. Here, the state of the art on the insulation of HVDC extruded cable system joints is covered with reference to types, design and testing techniques. This helps to identify routine tests as the first target for the onset of new testing procedures, AC-PD measurements as the readily-available measurement from manufacturers' practices for quality control of the insulation of accessories during routine tests and VHF/UHF wireless sensors as the best tool for performing such measurements on joints in the noisy factory environment. Thereby, a novel protocol for the measurement of partial discharges using AC voltages and VHF/UHF sensors, for quality control during routine tests on such joints, is derived in the next Part 2. This protocol is the main novelty of this investigation

The Insulation of HVDC Extruded Cable System Joints. Part 2: Proposal of a New AC Voltage PD Measurement Protocol for Quality Control during Routine Tests

The review of materials, design and testing of joints for HVDC extruded cable systems provided in previous Part 1 paved the way to this Part 2 position paper by the DEIS HVDC Cable Systems Technical Committee, whose aim is to remedy the scarcity of existing standardized tests on joints. After a sound analysis, here routine tests are identified as the first practical target for the onset of new testing procedures, AC-PD measurements as the readily-available measurement from manufacturers’ experience for quality control of joints during routine tests and VHF/UHF wireless sensors as the best tool for such measurements in the noisy environment of factories. Thereby, a novel protocol for PD measurement using AC voltages and VHF/UHF electromagnetic sensors, for quality control during routine tests on HVDC extruded joints, is proposed

Hobson’s choice? Constraints on accessing spaces of creative production

Successful creative production is often documented to occur in urban areas that are more likely to be diverse, a source of human capital and the site of dense interactions. These accounts chart how, historically, creative industries have clustered in areas where space was once cheap in the city centre fringe and inner city areas, often leading to the development of a creative milieu, and thereby stimulating further creative production. Historical accounts of the development of creative areas demonstrate the crucial role of accessible low-cost business premises. This article reports on the findings of a case study that investigated the location decisions of firms in selected creative industry sectors in Greater Manchester. The study found that, while creative activity remains highly concentrated in the city centre, creative space there is being squeezed and some creative production is decentralizing in order to access cheaper premises. The article argues that the location choices of creative industry firms are being constrained by the extensive city centre regeneration, with the most vulnerable firms, notably the smallest and youngest, facing a Hobson’s choice of being able to access low-cost premises only in the periphery. This disrupts the delicate balance needed to sustain production and begs the broader question as to how the creative economy fits into the existing urban fabric, alongside the competing demands placed on space within a transforming industrial conurbation

Higher Yield and Fewer Weeds in Four-Species Grass/Legume Mixtures Than in Monocultures: Results from the First Year at 20 Sites of Cost Action 852

Utilisation of grass/legume mixtures instead of grass monocultures is a sensible alternative for low input, efficient agricultural systems that reduce production costs, promote environmental policy and maintain a living countryside. Consequently, widely adapted forage legumes will become increasingly important. Instability of simple grass / legume mixtures with only one grass and one legume species is a major problem (Wachendorf et al., 2001). An experiment was established in 39 sites in Europe, Australia and Canada within COST Action 852 to: (1) assess the benefits of grass / legume mixtures in terms of forage production, (2) test whether the combination of fast and slow-growing species improves the stability of the mixtures and (3) assess response patterns over a large environmental gradient

How different are the British in their willingness to move? Evidence from International Social Survey Data

Our paper analyses people's willingness to move (WTM) using data from the 1995 British Social Attitudes Survey and International Social Survey Programme. We identify the personal characteristics and sub-regional indicators that are important in explaining the WTM within Britain. We also find that the WTM is only higher in a few other countries, including the United States. The equivalent desire to move is found to be much lower in Eastern European countries and in several other European Union member states. Compositional effects, such as age and education, are generally important in explaining differences in attitudes towards migration in comparison to other Western economies. However, structural effects such as institutions, history and culture tend to play a more dominant role in explaining differences compared to countries in Central and Eastern Europe

Models of bipolar charge transport in polyethylene

none7noneF. Boufayed; G. Teyssedre; C. Laurent; S. Leroy; L.A. Dissado; P. Ségur; G. C. MontanariF. Boufayed; G. Teyssedre; C. Laurent; S. Leroy; L.A. Dissado; P. Ségur; G. C. Montanar

An exploration of the views of paramedics regarding airway management

© 2016 Brandling et al. Background: Paramedics are a skilled group of clinicians with expertise in airway management. Our research group has completed a trial comparing supraglottic airway devices with tracheal intubation during out of hospital cardiac arrest. This is a contentious topic amongst paramedics in the United Kingdom (UK). We explored the customs and beliefs of UK paramedics in relation to airway management, and whether tracheal intubation contributes to and sustains paramedic professional identity. Methods: The study took place within South Western Ambulance Service NHS Foundation Trust. We used a qualitative approach, conducting interviews and focus groups with paramedics. The themes arising from interviews were discussed in focus groups, developing a deeper understanding and providing insight and recommendations for future research and policy. Purposive sampling accounted for differing training and for participation in the main trial. There were 17interviews and five focus groups with a further 17 participants. Data saturation was achieved. Results: Four domains were identified. Pride - The ability to use a life-saving skill in austere conditions. Utility - Different training routes and experience have led to different attitudes towards airway management. Inconsistent expectations - Paramedics felt that there were different perceptions of their abilities amongst hospital staff and the general public. Professionalization - Debate over airway management is not founded on good evidence. Conclusion: We have demonstrated that UK paramedics have a wide range of views regarding airway management, and that these are based on evidence and experience rather than dogma. Airway management contributes to paramedics' professional identity, but is not reliant on this