Experimental evidence for amorphous carbon grains in comets

Amorphous carbon grains similar to those produced in the laboratory, but with a higher hydrogen content, appear to be good candidates to simulate both the IR continuum emission and the 3.4 micron band measured for P/Halley. The comparison of the cometary features with those detected in the laboratory for carbon grains characterized by various sp(exp 2)/sp(exp 3) ratios seems to indicate that a prevalent diamond-like (sp(exp 3)) structure should be present in cometary particles. These kinds of solid particles seem also suitable to explain the daily and monthly variations of the 3.4 micron band intensity, relative to the continuum, and, at the same time,- to fulfill the abundance constraints. The same grains appear to be able to reproduce the absorption bands detected in the IR galactic source IRS 7. This result may be considered as a first experimental evidence of a relation existing between interstellar dust and cometary materials

Malfunction and Bad Behavior Diagnosis on Domestic Environment

Abstract Greenhouse gas emissions from homes arise primarily from fossil fuels burned for heat, the use of products that contain greenhouse gases, and the handling of waste. Human activities are responsible for almost all of the increase in greenhouse gases in the atmosphere over the last 150 years. The household sector is one of the biggest aggregate consumers and this is the reason why increasingly policies have been considering it. One of the key factors in curbing energy consumption in this sector is widely recognized to be due to erroneous behaviors and systems malfunctioning, mainly explained by the lack of awareness of the final user; so, training the final user to energy awareness can be more effective and cheaper than other policies. In this context, energy management in homes is playing, and will play even more in future, a key role in increasing the final consumer awareness towards its own energy consumption and consequently in bursting its active role in smart grids. The aim of this paper is to highlight the economic benefits of low cost intelligent control domestic devices, to identify energy behavior, system status and improve energy efficiency. The scope is to develop interaction between final users to create a network of energy consumption efficiency. The paper presents an application of Multi-scale Principal Component Analysis to diagnose inefficient occupant behavior and systems malfunctioning and suggest good practices of energy conservation

Raman properties of various carbonaceous materials and their astrophysical implications

It is well known that a large number of celestial objects exhibit, in the range 3 to 12 micron, a family of emission features called unidentified infrared bands (UIR). They usually appear together and are associated with UV sources. Recently various authors have suggested that these features could be attributed to solid carbonaceous materials. Following this interest, a systematic analysis was performed of various types of amorphous carbon grains and polycyclic aromatic hydrocarbons (PAH), produced in lab. Updating results of Raman measurements performed on several carbonaceous materials, chosen according to their astrophysical interest, are presented. The measurements were made by means of a Jobin-Yvon monochromator HG2S and standard DC electronic. The line at 5145 A of an Ar+ laser was used as excitation source

Sorafenib in advanced iodine-refractory differentiated thyroid cancer: efficacy, safety and exploratory analysis of role of serum thyroglobulin and FDG-PET.

Context Radioactive iodine is a crucial tool for treatment of differentiated thyroid cancer (DTC). In 5% of cases, DTCs lose I-131 avidity and assume an aggressive behaviour. Treatment options for iodine-refractory DTC are limited. We report the experience of off-label use of the tyrosine kinase inhibitor sorafenib for treatment of advanced iodine-refractory DTC. Design Patients with progressive DTC refractory to radioactive iodine were treated with sorafenib used off-label independently from their performance status. Primary study end-points were radiological response, progression-free survival (PFS) and safety. Secondary end-points were site-specific radiological response and overall survival (OS). An exploratory analysis of the role of serum thyroglobulin (Tg) and fluorodeoxyglucose (FDG) positron emission tomography (PET) was performed. Results A total of 17 patients were included in the study. Median follow-up was 15·5 months. Clinical benefit was obtained in 71% of subjects (30% partial response and 41% stable disease). Sorafenib was mostly well tolerated, but a high incidence of fatal events was reported (three patients died from severe bleeding events and two from cardiac arrest). Median PFS was 9 months. Median OS was 10 months. The best responses were observed in lymph nodes and lung. Baseline Tg levels and the Tg response to treatment were correlated to both radiological response and PFS. Baseline FDG-PET assessment and early FDG-PET response were correlated to radiological response. Conclusions Sorafenib allows morphological disease control in the majority of patients with iodine-refractory DTC. Progression-free survival and overall survival were lower than in previous studies as a consequence of the worse clinical condition of our patients. Sorafenib is mostly well tolerated but could have been responsible for the reported fatal events. Baseline Tg and the Tg response to treatment could be useful for predicting morphological response and clinical outcome. Early FDG-PET response could be helpful for the timely identification of nonresponding patients

VUV-visible measurements on different samples of amorphous carbon

Among various candidate materials for interstellar dust, amorphous carbon (AC) is playing an increasingly important role (Greenstein, 1981; Hecht et al., 1984; Jura, 1983, 1986). Furthermore, recent in situ measurements have clearly shown the presence of carbonaceous grains in the coma of comet Halley (Kissel et al., 1986). Laboratory investigations on AC grains may be very useful to better interpret observations and to support theoretical elaborations. Recently, the authors started an international research program which also includes UV extinction analyses on AC samples, by using synchrotron light. Preliminary results obtained in a first shift of measurements, last June, are given. At the present stage of the data analysis, the authors can only draw some preliminary considerations. A wide band falling at around 240 nm is detected in all the analyzed samples. It intensity seems to decrease with increasing the dust collecting distance. A peak at 150 nm decreases in intensity with increasing the collecting distance. The band seems absent in the samples characterized by a larger amount of dust. A feature at about 200 nm is detected in some samples. At the moment the authors tend to attribute it to the transmission properties of the LiF substrates at the wavelength and/or to some problems in the experimental setup. It is unclear if a hump at 120 nm is real or due to instrumental effects. The profile of the spectra does not show substantial changes when the samples are cooled down to about 100 K. The present results appear to be in general agreement with previous findings, but their analysis is in progress and the interpretation is still on the way

Defining an Adequate Sample of Earlywood Vessels for Retrospective Injury Detection in Diffuse-Porous Species

Vessels of broad-leaved trees have been analyzed to study how trees deal with various environmental factors. Cambial injury, in particular, has been reported to induce the formation of narrower conduits. Yet, little or no effort has been devoted to the elaboration of vessel sampling strategies for retrospective injury detection based on vessel lumen size reduction. To fill this methodological gap, four wounded individuals each of grey alder (Alnus incana (L.) Moench) and downy birch (Betula pubescens Ehrh.) were harvested in an avalanche path. Earlywood vessel lumina were measured and compared for each tree between the injury ring built during the growing season following wounding and the control ring laid down the previous year. Measurements were performed along a 10 mm wide radial strip, located directly next to the injury. Specifically, this study aimed at (i) investigating the intra-annual duration and local extension of vessel narrowing close to the wound margin and (ii) identifying an adequate sample of earlywood vessels (number and intra-ring location of cells) attesting to cambial injury. Based on the results of this study, we recommend analyzing at least 30 vessels in each ring. Within the 10 mm wide segment of the injury ring, wound-induced reduction in vessel lumen size did not fade with increasing radial and tangential distances, but we nevertheless advise favoring early earlywood vessels located closest to the injury. These findings, derived from two species widespread across subarctic, mountainous, and temperate regions, will assist retrospective injury detection in Alnus, Betula, and other diffuse-porous species as well as future related research on hydraulic implications after wounding

Thermal maps and properties of comet 67P as derived from Rosetta/VIRTIS data

After a 10-year cruise, the Rosetta spacecraft began a close exploration of its main target, comet 67P/Churyumov-Gerasimenko, in July 2014. Since then, the Visible InfraRed Thermal Imaging Spectrometer (VIRTIS) acquired hyperspectral images of the comet’s surface with an unprecedented spatial resolution. VIRTIS data are routinely used to map the surface composition and to retrieve surface temperatures on the dayside of the comet. The thermal behavior of the surface of comet 67P is related to composition and physical properties that provide information about the nature and evolution of those materials. Here we present temperature maps of comet 67P that were observed by Rosetta under different illumination conditions and different local solar times

The utility of bulk wood density for tree-ring research

Bulk wood density measurements are recognized for their utility in ecology, industry, and biomass estimations.. In tree-ring research, microdensitometric techniques are widely used, but their ability to determine the correct central tendency has been questioned. Though rarely used, it may be possible to use bulk wood density as a tool to check the accuracy of and even correct microdensitometric measurements. Since measuring bulk wood density in parallel with X-ray densitometry is quickly and easily done, we suspect that its omission is largely due to a lack of awareness of the procedure and/or its importance. In this study, we describe a simple protocol for measuring bulk wood density tailored for tree-ring researchers and demonstrate a few possible applications. To implement real-world examples of the applications, we used a sample of existing X-ray and Blue Intensity (BI) measurements from 127 living and dead Pinus sylvestris trees from northern Sweden to produce new measurements of bulk wood density. We can confirm that the central tendency in this sample material is offset using X-ray densitometry and that the diagnosis and correction of X-ray density is easily done using bulk wood density in linear transfer functions. However, this approach was not suitable for our BI measurements due to heavy discoloration. Nevertheless, we were able to use bulk wood density to diagnose and improve the use of deltaBI (latewood BI – earlywood BI) with regard to its overall trends and multi-centennial variability in a dendroclimatological application. Moreover, we experimented with percent of latewood width, scaled with bulk wood density, as a time- and cost-effective proxy for annual ring density. Although our reconstruction only explains about half of the variation in ring density, it is most likely superior to using fixed literature values of density in allometric equations aimed at biomass estimations. With this study, we hope to raise new awareness regarding the versatility and importance of bulk wood density for dendrochronology by demonstrating its simplicity, relevance, and applicability

Liposomal doxorubicin supercharge-containing front-line treatment in patients with advanced-stage diffuse large B-cell lymphoma or classical Hodgkin lymphoma: Preliminary results of a single-centre phase II study

We evaluated the impact of liposomal doxorubicin (NPLD) supercharge-containing therapy on interim fluorodeoxyglucose positron emission tomography (interim-FDG-PET) responses in high-risk diffuse large B-cell lymphoma (DLBCL) or classical Hodgkin lymphoma (c-HL). In this phase II study (2016-2021), 81 adult patients with advanced-stage DLBCL (n = 53) and c-HL (n = 28) received front-line treatment with R-COMP-dose-intensified (DI) and MBVD-DI. R-COMP-DI consisted of 70 mg/m2 of NPLD plus standard rituximab, cyclophosphamide, vincristine and prednisone for three cycles (followed by three cycles with NPLD de-escalated at 50 mg/m2 ); MBVD-DI consisted of 35 mg/m2 of NPLD plus standard bleomycin, vinblastine and dacarbazine for two cycles (followed by four cycles with NPLD de-escalated at 25 mg/m2 ). Patients underwent R-COMP-DI and MBVD-DI with a median dose intensity of 91% and 94% respectively. At interim-FDG-PET, 72/81 patients (one failed to undergo interim-FDG-PET due to early death) had a Deauville score of ≤3. At end of treatment, 90% of patients reached complete responses. In all, 20 patients had Grade ≥3 adverse events, and four of them required hospitalisation. At a median 21-months of follow-up, the progression-free survival of the entire population was 77.3% (95% confidence interval 68%-88%). Our data suggest that the NPLD supercharge-driven strategy in high-risk DLBCL/c-HL may be a promising option to test in phase III trials, for improving negative interim-FDG-PET cases incidence

Q-NET: a new scholarly network on quantitative wood anatomy

Quantitative wood anatomy (QWA) is a dynamic research approach of increasing interest that can provide answers to a wide range of research questions across different disciplines. However, the lack of common protocols and knowledge gaps hinder the realisation of the full potential of QWA. Therefore, we established the new community-based network Q-NET to provide an open interdisciplinary platform for exchange and research around QWA. Q-NET (https://qwa-net.com) combines an online knowledge and exchange base with virtual workshops. The first two workshops each attracted more than 125 participants from around the world, demonstrating the community’s interest in QWA and this virtual way of networking and collaborating. Indeed, virtual networks such as Q-NET could increase the inclusiveness, efficiency and sustainability of scientific collaboration while providing additional training and teaching opportunities for early career scientists, both of which complement in-person conferences and workshops.Plant sciencesNaturali