Structural control on the directional amplification of seismic noise (Campo Imperatore, central Italy)

Abstract Seismic signals propagating across a fault may yield information on the internal structure of the fault zone. Here we have assessed the amplification of seismic noise (i.e., ambient vibrations generated by natural or anthropogenic disturbances) across the Vado di Corno Fault (Campo Imperatore, central Italy). The fault zone is considered as an exhumed analogue of the normal faults activated during the L'Aquila 2009 earthquake sequence. Detailed structural geological survey of the footwall block revealed that the fault zone is highly anisotropic and is affected by a complex network of faults and fractures with dominant WNW–ESE strike. We measured seismic noise with portable seismometers along a ∼500 m long transect perpendicular to the average fault strike. Seismic signals were processed calculating the horizontal-to-vertical spectral ratios and performing wavefield polarization analyses. We found a predominant NE–SW to NNE–SSW (i.e., ca. perpendicular to the average strike of the fault-fracture network) amplification of the horizontal component of the seismic waves. Numerical simulations of earthquake-induced ground motions ruled out the role of topography in controlling the polarization and the amplitude of the waves. Therefore, the higher seismic noise amplitude observed in the fault-perpendicular direction was related to the measured fracture network and the resulting stiffness anisotropy of the rock mass. These observations open new perspectives in using measures of ambient seismic noise, which are fast and inexpensive, to estimate the dominant orientation of fracture networks within fault zones

Concurrent renal-cell carcinoma and cutaneous leiomyomas: A case of HLRCC

AbstractA 51-year-old Caucasian female presenting with renal-cell cancer and cutaneous leiomyomas was later diagnosed with Hereditary Leiomyomatosis and Renal Cell Cancer (HLRCC) Syndrome. HLRCC is an autosomal dominant condition caused by a mutation in the fumarate hydratase gene, which encodes for an enzyme in the citric acid cycle. This syndrome has been reported in over 100 families throughout the world, the majority of whom are of Eastern European descent. Those with this syndrome have a significantly increased risk of developing renal-cell carcinoma, cutaneous leiomyomas, and uterine leiomyomas, and a smaller chance of developing uterine leiomyosarcomas. This syndrome has a relatively poor prognosis, with tumor metastasis occurring in approximately 50% of patients. However, more aggressive prophylactic measures and recent studies have shown potential to improve patient prognosis

Structural evolution of a crustal‐scale seismogenic fault in a magmatic arc: The Bolfin Fault Zone (Atacama Fault System)

How major crustal-scale seismogenic faults nucleate and evolve in crystalline basements represents a long-standing, but poorly understood, issue in structural geology and fault mechanics. Here, we address the spatio-temporal evolution of the Bolfin Fault Zone (BFZ), a >40-km-long exhumed seismogenic splay fault of the 1000-km-long strike-slip Atacama Fault System. The BFZ has a sinuous fault trace across the Mesozoic magmatic arc of the Coastal Cordillera (Northern Chile) and formed during the oblique subduction of the Aluk plate beneath the South American plate. Seismic faulting occurred at 5–7 km depth and ≤ 300°C in a fluid-rich environment as recorded by extensive propylitic alteration and epidote-chlorite veining. Ancient (125–118 Ma) seismicity is attested by the widespread occurrence of pseudotachylytes. Field geologic surveys indicate nucleation of the BFZ on precursory geometrical anisotropies represented by magmatic foliation of plutons (northern and central segments) and andesitic dyke swarms (southern segment) within the heterogeneous crystalline basement. Seismic faulting exploited the segments of precursory anisotropies that were optimal to favorably oriented with respect to the long-term far-stress field associated with the oblique ancient subduction. The large-scale sinuous geometry of the BFZ resulted from the hard linkage of these anisotropy-pinned segments during fault growth

Static versus dynamic fracturing in shallow carbonate fault zones

Moderate to large earthquakes often nucleate within and propagate through carbonates in the shallow crust. The occurrence of thick belts of low-strain fault-related breccias is relatively common within carbonate damage zones and was generally interpreted in relation to the quasi-static growth of faults. Here we report the occurrence of hundreds of meters thick belts of intensely fragmented dolostones along a major transpressive fault zone in the Italian Southern Alps. These fault rocks have been shattered in-situ with negligible shear strain accumulation. The conditions of in-situ shattering were investigated by deforming the host dolostones in uniaxial compression both under quasi-static (strain rate ∼10−5s−1) and dynamic (strain rate >50s−1) loading. Dolostones deformed up to failure under low-strain rate were affected by single to multiple discrete extensional fractures sub-parallel to the loading direction. Dolostones deformed under high-strain rate were shattered above a strain rate threshold of ∼120s−1 and peak stresses on average larger than the uniaxial compressive strength of the rock, whereas they were split in few fragments or remained macroscopically intact at lower strain rates. Fracture networks were investigated in three dimensions showing that low- and high-strain rate damage patterns (fracture intensity, aperture, orientation) were significantly different, with the latter being similar to that of natural in-situ shattered dolostones (i.e., comparable fragment size distributions). In-situ shattered dolostones were thus interpreted as the result of high energy dynamic fragmentation (dissipated strain energies >1.8 MJ/m3) similarly to pulverized rocks in crystalline lithologies. Given their seismic origin, the presence of in-situ shattered dolostones can be used in earthquake hazard studies as evidence of the propagation of seismic ruptures at shallow depths

Static versus dynamic fracturing in shallow carbonate fault zones

International audienc

Frictional Melting in Hydrothermal Fluid-Rich Faults: Field and Experimental Evidence From the Bolfin Fault Zone (Chile)

Tectonic pseudotachylytes are thought to be unique to certain water-deficient seismogenic environments and their presence is considered to be rare in the geological record. Here, we present field and experimental evidence that frictional melting can occur in hydrothermal fluid-rich faults hosted in the continental crust. Pseudotachylytes were found in the >40 km-long Bolf\uedn Fault Zone of the Atacama Fault System, within two ca. 1 m-thick (ultra)cataclastic strands hosted in a damage-zone made of chlorite-epidote-rich hydrothermally altered tonalite. This alteration state indicates that hydrothermal fluids were active during the fault development. Pseudotachylytes, characterized by presenting amygdales, cut and are cut by chlorite-, epidote- and calcite-bearing veins. In turn, crosscutting relationship with the hydrothermal veins indicates pseudotachylytes were formed during this period of fluid activity. Rotary shear experiments conducted on bare surfaces of hydrothermally altered rocks at seismic slip velocities (3\ua0m s 121) resulted in the production of vesiculated pseudotachylytes both at dry and water-pressurized conditions, with melt lubrication as the primary mechanism for fault dynamic weakening. The presented evidence challenges the common hypothesis that pseudotachylytes are limited to fluid-deficient environments, and gives insights into the ancient seismic activity of the system. Both field observations and experimental evidence, indicate that pseudotachylytes may easily be produced in hydrothermal environments, and could be a common co-seismic fault product. Consequently, melt lubrication could be considered one of the most efficient seismic dynamic weakening mechanisms in crystalline basement rocks of the continental crust

Thermal weakening friction during seismic slip experiments and models with heat sources and sinks

Experiments that systematically explore rock friction under crustal earthquake conditions reveal that faults undergo abrupt dynamic weakening. Processes related to heating and weakening of fault surfaces have been invoked to explain pronounced velocity weakening. Both contact asperity temperature Ta and background temperature T of the slip zone evolve significantly during high-velocity slip due to heat sources (frictional work), heat sinks (e.g., latent heat of decomposition processes), and diffusion. Using carefully calibrated High-Velocity Rotary Friction experiments, we test the compatibility of thermal weakening models: (1) a model of friction based only on T in an extremely simplified, Arrhenius-like thermal dependence; (2) a flash heating model which accounts for the evolution of both V and T; (3) same but including heat sinks in the thermal balance; and (4) same but including the thermal dependence of diffusivity and heat capacity. All models reflect the experimental results but model (1) results in unrealistically low temperatures and model (2) reproduces the restrengthening phase only by modifying the parameters for each experimental condition. The presence of dissipative heat sinks in stage (3) significantly affects T and reflects on the friction, allowing a better joint fit of the initial weakening and final strength recovery across a range of experiments. Temperature is significantly altered by thermal dependence of (4). However, similar results can be obtained by (3) and (4) by adjusting the energy sinks. To compute temperature in this type of problem, we compare the efficiency of three different numerical approximations (finite difference, wavenumber summation, and discrete integral)

A new icriodontid conodont cluster with specific mesowear supports an alternative apparatus motion model for Icriodontidae

Increasing numbers of conodont discoveries with soft tissue preservation, natural assemblages and fused clusters of the hard tissue have strengthened the hypothesis regarding the function and mechanism of the conodont feeding apparatus. Exceptional fossil preservation serves as a solid basis for modern reconstructions of the conodont apparatus illustrating the complex interplay of the single apparatus elements. Reliable published models concern the ozarkodinid apparatus of Pennsylvanian and Early Triassic conodonts. Recognition of microwear and mammal-like occlusion, especially of platform elements belonging to individuals of the genus Idiognathodus, allows rotational closure to be interpreted as the crushing mechanism of ozarkodinid platform (P1) elements. Here we describe a new icriodontid conodont cluster of Caudicriodus woschmidti that consists of one pair of icriodontan (I) and 10 pairs of coniform (C1\ue2\u80\u935) elements, with I elements being preserved in interlocking position. The special kind of element arrangement within the fused cluster provides new insights into icriodontid apparatus reconstruction and notation of elements. However, orientation of coniform elements is limited to a certain degree by possible preservational bias. Four possible apparatus models are introduced and discussed. Recognition of specific wear on denticle tips of one of the icriodontan elements forms the basis for an alternative hypothesis of apparatus motion. Analysis of tip wear suggests a horizontal, slightly elliptical motion of opposed, antagonistically operating I elements. This is supported by similar tip wear from much better preserved, but isolated, elements of Middle Devonian icriodontids. More detailed interpretation of the masticatory movement will allow enhanced understanding of anatomical specifications, diet and palaeobiology of different euconodont groups

Directional resonance and wavefield polarization in the damage zone of the Campo Imperatore fault, central Italy.

To infer the occurrence of directional amplification effects, we performed ambient noise measurements along a 200m transect crossing the Campo Imperatore fault zone (Central Italy), an exhumed analogue of the faults responsible of the L'Aquila 2009 earthquake sequence, We have recently found in several fault zones that ambient noise is not randomly polarized, but it is amplified on the horizontal plane along a specific site-dependent direction. The analysis repeated using earthquake signals revealed that S-coda waves and surface waves show the same polarization direction, independently of the earthquake backazimuth and focal mechanism. We have explained the observed directional amplifications in terms of fractured rocks in the fault damage zone, polarization being oriented orthogonally to fractures produced by the kinematic stress component. Therefore ground motion directional amplification could be related to the higher compliance of fractured rocks. In the other studies the fracture pattern was derived from numerical-analytical modeling based on the fault geometry and kinematics, or compared with the fast direction of shear wave obtained by seismic anisotropy analysis. The aim of this study is to compare observations with fracture measurements (strike, dip, dip-azimuth, spacing, later continuity, etc.) performed in the selected fault zone. We thus acquired ambient noise using 25 stations installed along a transect where detailed structural geological measurements were carried out. Ambient noise was recorded for around 1 hour, and was processed to compute the horizontal-to-vertical noise spectral ratio as a function of frequency and direction of motion. Wavefield polarization was investigated in the time–frequency domain as well. We found that, in spite of the complexity of the seismic data, the observed polarization pattern is generally oriented orthogonal to the measured dominant fracture system, confirming the existence of a high angle relation between ground motion polarization and fracture systems.UnpublishedSan Francisco3T. Pericolosità sismica e contributo alla definizione del rischioope