Non-native freshwater fauna in Portugal: a review

We present the most updated list of non-native freshwater fauna established in Portugal, including the Azores and Madeira archipelagos. This list includes 67 species at national level but corresponds to 84 species records, of which 53 are in the mainland, 23 in the Azores and 8 in Madeira archipelagos. We also discuss the progression of the cumulative number of introductions since 1800 and identify the most probable vectors of introduction, main taxonomic groups and their regions of origin. Furthermore, we review the existing knowledge about ecological and economic impacts, invasion risk and potential distribution of invaders, under present and future climatic conditions, and the applied management actions, including the production of legislation. Along the 20th century the number of successful introductions increased at an approximate rate of two new species per decade until the beginning of 1970s. Since then, this rate increased to about 14 new species per decade. These introductions were mainly a result of fisheries, as contaminants or for ornamental purposes. Fish and mollusks are the taxonomic groups with more established species, representing more than half of the total. Most species (>70%) are native from other regions of Europe and North America. Studies about ecological or socioeconomic impacts are more common for fish, crustaceans and mollusks. Impacts for most amphibians, reptiles and mammals are not thoroughly studied. A few studies on the impacts and management actions of health-threatening mosquitoes are also available. The potential distribution in the Portuguese territory was modelled for 26 species. Only a minority of these models provides projections of distributions under scenarios of future climate change. A comparison of the Portuguese and EU legislation shows large discrepancies in the invasive species lists. Using the EU list and a ranking procedure for the national context, we identify freshwater species of high national concern for which actions are urgently needed.This work was supported by the FRISK Project (Ref. PTDC/AAG-MAA/0350/2014) to F. Ribeiro and by the strategic plan of MARE - Marine and Environmental Sciences Centre (UID/MAR/04292/2013) to F. Banha with a short term post-doc grant on the University of Evora and a small project. A. F. Filipe was supported by the FRESHING project funded by FCT and COMPETE (PTDC/AAG-MAA/2261/2014 - POCI-01-0145-FEDER-356 016824). R. Sousa was supported by FRESHCO project (contract: PTDC/AGRFOR/1627/2014) funded by FCT

Periodic vehicle routing problem in a health unit

In logistics of home health care services in the Health Units, the managers and nurses need to carry out the schedule and the vehicles routes for the provision of care at the patients' homes. Currently, in Portugal, these services are increasingly used but the problem is still, usually, solved manually and without computational resources. The increased demand for home health care due to the boost of the elderly people number entails a high associated cost which, sometimes, does not guarantee the quality of the service. In this sense, the periodic vehicle routing problem is a generalization of the classical vehicle routing problem in which routes are determined for a time horizon of several days. In this work, it is provided a periodic vehicle routing problem applied in the Health Unit in Bragança. An integer linear programming formulation for the real database, allowed to solve the problem in an efficient and optimized way using the CPLEXR software.Programa Operacional Temático Factores de Competitividade(POCI-01-0145-FEDER-007043

Alkane coiling in perfluoroalkane solutions: a new primitive solvophobic effect

In this work, we demonstrate that n-alkanes coil when mixed with perfluoroalkanes, changing their conformational equilibria to more globular states, with a higher number of gauche conformations. The new coiling effect is here observed in fluids governed exclusively by dispersion interactions, contrary to other examples in which hydrogen bonding and polarity play important roles. FTIR spectra of liquid mixtures of n-hexane and perfluorohexane unambiguously reveal that the population of n-hexane molecules in all-trans conformation reduces from 32% in the pure n-alkane to practically zero. The spectra of peffluorohexane remain unchanged, suggesting nanosegregatiori of the hydrogenated and fluorinated chains. Molecular dynamics simulatiOns support this analysis. The new solvophobic effect is prone to have a major impact on the structure, organization, and therefore thermodynamic properties and phase equilibria of, fluids involving mixed hydrogenated and fluorinated chains.Fundacao para a Ciencia e Tecnologia [UID/NAN/50024/2013, UID/QUI/0100/2013, SFRH/BPD/81748/2011

Synthesis of 3-indolylazoles and meridianin derivatives from indolyl enaminonitriles

The reaction of indole derivatives with cyanoacetic acid followed by treatment with DMFDMA gave the intermediate indolyl enaminonitriles (3). Further reaction with aminoguanidine yielded 5´-cyanomeridianin analogues (4). The same intermediate reacted with p-methoxyphenylhydrazine to give the pyrazolyl derivative (8). Treatment of (2E)-3-dimethylamino-2-(1H-indol-3-yl)-propenoate (3a) with hydroxylamine hydrochloride in basic medium afforded (5-amino-isoxazol-4-yl)-(1H-indol-3-yl)-methanone (5) and the acrylic acid derivative (6) after a short or a long heating, respectively. Unequivocal structural elucidation of the latter compound was achieved from single-crystal X-ray diffraction studies.Fundação para a Ciência e a Tecnologia (FCT) - SFRH/BPD/31490/2006FEDER - REEQ/ 630/QUI/200

SousChef System for Personalized Meal Recommendations: A Validation Study

Nutrition is an essential part of our life. A healthy diet can help to prevent several chronic diseases like diabetes, obesity, cancer, and cardiovascular diseases, being influenced by social, cultural, and economic factors. Meal recommender systems are a trend to assist people in finding new recipes to cook and adopt healthier eating habits. However, food choice is complex and driven by multiple factors which need to be reflected in the personalization process of these systems to ensure their adoption. We present SousChef, a meal recommender system that can help to plan multiple meals considering an individual’s food preferences, restrictions, and nutritional needs. Our approach uses recipes rather than individual food items, limiting recommendations to tasteful and culturally acceptable food combinations. Several experiments were performed to evaluate the system from different perspectives: nutritional, food preferences, and restrictions, and the recommendations’ variability. Our results highlight the importance of using extensive and diverse content in recommendations to meet food preferences, restrictions, and nutritional needs of people with different characteristics.The authors would like to acknowledge the financial support obtained from the project Future Yämmi, co-funded by Compete 2020, Lisboa 2020, Portugal 2020 and the European Union, through the European Regional Development Fund (FEDER). Elsa F. Vieira (Ref CEECIND/03988/2018) thanks FCT (Fundação para a Ciência e Tecnologia) for funding through the Individual Call to Scientific Employment Stimulus, and to REQUIMTE/LAQV.info:eu-repo/semantics/publishedVersio

Stereotypy and variation in the claw waving display of the fiddler crab Uca tangeri

We measured temporal and spatial components of the waving display in a Uca tangeri population to look for inter-individual differences in male waving structure that may convey information about individual identity. We found evidence that the spatial components of wave structure, especially “Maximum amplitude” are responsible for most of the between-male variation of the display. This variation could reflect differences in individuals’ condition and/or could be used by conspecifics to discriminate amongst familiar and unfamiliar individuals

Recent advances in smart biotechnology: Hydrogels and nanocarriers for tailored bioactive molecules depot

Over the past ten years, the global biopharmaceutical market has remarkably grown, with ten over the top twenty worldwide high performance medical treatment sales being biologics. Thus, biotech R&D (research and development) sector is becoming a key leading branch, with expanding revenues. Biotechnology offers considerable advantages compared to traditional therapeutic approaches, such as reducing side effects, specific treatments, higher patient compliance and therefore more effective treatments leading to lower healthcare costs. Within this sector, smart nanotechnology and colloidal self-assembling systems represent pivotal tools able to modulate the delivery of therapeutics. A comprehensive understanding of the processes involved in the self assembly of the colloidal structures discussed therein is essential for the development of relevant biomedical applications. In this review we report the most promising and best performing platforms for specific classes of bioactive molecules and related target, spanning from siRNAs, gene/plasmids, proteins/growth factors, small synthetic therapeutics and bioimaging probes.Istituto Italiano di Tecnologia (IIT)COST Action [CA 15107]People Program (Marie Curie Actions) of the European Union's Seventh Framework Program under REA [606713 BIBAFOODS]Portuguese Foundation for Science and Technology (FCT) [PTDC/AGR-TEC/4814/2014, IF/01005/2014]Fundacao para a Ciencia e Tecnologia [SFRH/BPD/99982/2014]Danish National Research Foundation [DNRF 122]Villum Foundation [9301]Italian Ministry of Instruction, University and Research (MIUR), PRIN [20109PLMH2]"Fondazione Beneficentia Stiftung" VaduzFondo di Ateneo FRAFRAinfo:eu-repo/semantics/publishedVersio

Anticipating the Effects of Increasing Rivers’ Water Salinity for Sustainable Conservation of Tilapia Resources in Rural Coastal Zone of Benin, West Africa

The current research aimed at using the application of multi-factor models to support fisheries management decisions for successful resources’ conservation. The study was based on the tilapia species Coptodon guineensis, which is among the most widely exploited in Benin coastal zone. In an attempt to suggest conservation strategies, the phenotypic variability of 356 accessions of this species was assessed in relation with water salinity, and several interactions. The fish were collected through small-scale experimental fishing using cast nets and gillnets. The findings indicated that the salinity observed in the sampled rivers is due, at proportions ranging from 0.13% to 47%, to the sea surface salinity (SSS) of the Atlantic Ocean, suggesting a leading inland origin of the salinity of these rivers. The evidence also showed that the tilapia populations have been relatively adapted to the increasing water salinity of the sampled rivers. The fish species*river type and fish species*fish sex interactions had significant effects on phenotypic characteristics rather than river type*fish sex interaction. For an efficient conservation of these populations, two conservation areas (Lake Nokoué and Porto-Novo lagoon vs Lake Toho and Grand-Popo lagoon), could be considered for this tilapia species. Keywords: Aquatic salinization, population adaptation, growth parameters, interaction pattern

Diclofenac release from a silicon based contact lens material controlled by a chitosan/alginate coating

Poster presented at the AAO 2016 (American Academy of Ophthalmology Annual Meeting). Chicago, 15-18 October 2016.N/

Numerical-experimental plastic-damage characterisation of additively manufactured 18ni300 maraging steel by means of multiaxial double-notched specimens

PTDC/EME/31307/2017Additive manufacturing (AM) has become a viable option for producing structural parts with a high degree of geometrical complexity. Despite such trend, accurate material properties, under diversified testing conditions, are scarce or practically non-existent for the most recent additively manufactured (AMed) materials. Such data gap may compromise component performance design, through numerical simulation, especially enhanced by topological optimisation of AMed components. This study aimed at a comprehensive characterisation of laser powder bed fusion as-built 18Ni300 maraging steel and its systematic comparison to the conventional counterpart. Multiaxial double-notched specimens demonstrated a successful depiction of both plastic and damage behaviour under different stress states. Tensile specimens with distinct notch configurations were also used for high stress triaxiality range characterisation. This study demonstrates that the multiaxial double-notched specimens constitute a viable option towards the inverse plastic behaviour calibration of high-strength additively manufactured steels in distinct state of stress conditions. AMed maraging steel exhibited higher strength and lower ductility than the conventional material.publishersversionpublishe