16 research outputs found
Validation of TANSO-FTS/GOSAT XCO<sub>2</sub> and XCH<sub>4</sub> glint mode retrievals using TCCON data from near-ocean sites
The thermal And near infrared sensor for carbon observations Fourier transform spectrometer (TANSO-FTS) on board the Greenhouse Gases Observing Satellite (GOSAT) applies the normal nadir mode above the land (“land data”) and sun glint mode over the ocean (“ocean data”) to provide global distributions of column-averaged dry-air mole fractions of CO2 and CH4, or XCO2 and XCH4. Several algorithms have been developed to obtain highly accurate greenhouse gas concentrations from TANSO-FTS/GOSAT spectra. So far, all the retrieval algorithms have been validated with the measurements from ground-based Fourier transform spectrometers from the Total Carbon Column Observing Network (TCCON), but limited to the land data. In this paper, the ocean data of the SRPR, SRFP (the proxy and full-physics versions 2.3.5 of SRON/KIT's RemoTeC algorithm), NIES (National Institute for Environmental Studies operational algorithm version 02.21) and ACOS (NASA's Atmospheric CO2 Observations from Space version 3.5) are compared with FTIR measurements from five TCCON sites and nearby GOSAT land data.For XCO2, both land and ocean data of NIES, SRFP and ACOS show good agreement with TCCON measurements. Averaged over all TCCON sites, the relative biases of ocean data and land data are −0.33 and −0.13 % for NIES, 0.03 and 0.04 % for SRFP, 0.06 and −0.03 % for ACOS, respectively. The relative scatter ranges between 0.31 and 0.49 %. For XCH4, the relative bias of ocean data is even less than that of the land data for the NIES (0.02 vs. −0.35 %), SRFP (0.04 vs. 0.20 %) and SRPR (−0.02 vs. 0.06 %) algorithms. Compared to the results for XCO2, the XCH4 retrievals show larger relative scatter (0.65–0.81 %)
Ability of the 4-D-Var analysis of the GOSAT BESD XCO₂ retrievals to characterize atmospheric CO₂ at large and synoptic scales
This study presents results from the European Centre for Medium-Range Weather Forecasts (ECMWF) carbon dioxide (CO₂) analysis system where the atmospheric CO₂ is controlled through the assimilation of column-averaged dry-air mole fractions of CO₂ (XCO₂) from the Greenhouse gases Observing Satellite (GOSAT). The analysis is compared to a free-run simulation (without assimilation of XCO₂), and they are both evaluated against XCO₂ data from the Total Carbon Column Observing Network (TCCON). We show that the assimilation of the GOSAT XCO₂ product from the Bremen Optimal Estimation Differential Optical Absorption Spectroscopy (BESD) algorithm during the year 2013 provides XCO₂ fields with an improved mean absolute error of 0.6 parts per million (ppm) and an improved station-to-station bias deviation of 0.7 ppm compared to the free run (1.1 and 1.4 ppm, respectively) and an improved estimated precision of 1 ppm compared to the GOSAT BESD data (3.3 ppm). We also show that the analysis has skill for synoptic situations in the vicinity of frontal systems, where the GOSAT retrievals are sparse due to cloud contamination. We finally computed the 10-day forecast from each analysis at 00:00 UTC, and we demonstrate that the CO₂ forecast shows synoptic skill for the largest-scale weather patterns (of the order of 1000 km) even up to day 5 compared to its own analysis
Fano Resonances in Electronic Transport through a Single Electron Transistor
We have observed asymmetric Fano resonances in the conductance of a single
electron transistor resulting from interference between a resonant and a
nonresonant path through the system. The resonant component shows all the
features typical of quantum dots, but the origin of the non-resonant path is
unclear. A unique feature of this experimental system, compared to others that
show Fano line shapes, is that changing the voltages on various gates allows
one to alter the interference between the two paths.Comment: 8 pages, 6 figures. Submitted to PR
Validation of water vapour profiles (version 13) retrieved by the IMK/IAA scientific retrieval processor based on full resolution spectra measured by MIPAS on board Envisat
First validation results of S-5P Methane and Carbon Monoxide using data from all stations of the groundbased FTIR networks of TCCON and NDACC-IRWG group
Validation of stratospheric water vapour measurements from the airborne microwave radiometer AMSOS
We present the validation of a water vapour
dataset obtained by the Airborne Microwave Stratospheric
Observing System AMSOS, a passive microwave radiometer
operating at 183 GHz. Vertical profiles are retrieved from
spectra by an optimal estimation method. The useful vertical
range lies in the upper troposphere up to the mesosphere
with an altitude resolution of 8 to 16 km and a horizontal resolution
of about 57 km. Flight campaigns were performed
once a year from 1998 to 2006 measuring the latitudinal distribution
of water vapour from the tropics to the polar regions.
The obtained profiles show clearly the main features
of stratospheric water vapour in all latitudinal regions. Data
are validated against a set of instruments comprising satellite,
ground-based, airborne remote sensing and in-situ instruments.
It appears that AMSOS profiles have a dry bias of
0 to –20%, when compared to satellite experiments. Also a
comparison between AMSOS and in-situ hygrosondes FISH
and FLASH have been performed. A matching in the short
overlap region in the upper troposphere of the lidar measurements
from the DIAL instrument and the AMSOS dataset
allowed water vapour profiling from the middle troposphere
up to the mesosphere
Validation of MIPAS-ENVISAT H2O operational data collected between July 2002 and March 2004
Water vapour (H2O) is one of the operationally retrieved key species of the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) instrument aboard the Environmental Satellite (ENVISAT) which was launched into its sun-synchronous orbit on 1 March 2002 and operated until April 2012. Within the MIPAS validation activities, independent observations from balloons, aircraft, satellites, and ground-based stations have been compared to European Space Agency (ESA) version 4.61 operational H2O data comprising the time period from July 2002 until March 2004 where MIPAS measured with full spectral resolution. No significant bias in the MIPAS H2O data is seen in the lower stratosphere (above the hygropause) between about 15 and 30 km. Differences of H2O quantities observed by MIPAS and the validation instruments are mostly well within the combined total errors in this altitude region. In the upper stratosphere (above about 30 km), a tendency towards a small positive bias (up to about 10%) is present in the MIPAS data when compared to its balloon-borne counterpart MIPAS-B, to the satellite instruments HALOE (Halogen Occultation Experiment) and ACE-FTS (Atmospheric Chemistry Experiment, Fourier Transform Spectrometer), and to the millimeter-wave airborne sensor AMSOS (Airborne Microwave Stratospheric Observing System). In the mesosphere the situation is unclear due to the occurrence of different biases when comparing HALOE and ACE-FTS data. Pronounced deviations between MIPAS and the correlative instruments occur in the lowermost stratosphere and upper troposphere, a region where retrievals of H2O are most challenging. Altogether it can be concluded that MIPAS H2O profiles yield valuable information on the vertical distribution of H2O in the stratosphere with an overall accuracy of about 10 to 30% and a precision of typically 5 to 15% – well within the predicted error budget, showing that these global and continuous data are very valuable for scientific studies. However, in the region around the tropopause retrieved MIPAS H2O profiles are less reliable, suffering from a number of obstacles such as retrieval boundary and cloud effects, sharp vertical discontinuities, and frequent horizontal gradients in both temperature and H2O volume mixing ratio (VMR). Some profiles are characterized by retrieval instabilities
Statistical Analysis of Global Connectivity and Activity Distributions in Cellular Networks
An assessment of pseudo-operational ground-based light detection and ranging sensors to determine the boundary-layer structure in the coastal atmosphere
International audienceTwenty-one cases of boundary-layer structure were retrieved by three co-located remote sensors, One LIDAR and two ceilometers at the coastal site of Mace Head, Ireland. Data were collected during the ICOS field campaign held at the GAW Atmospheric Station of Mace Head, Ireland, from 8th to 28th of June, 2009. The study is a two-step investigation of the BL structure based on (i) the intercomparison of the backscatter profiles from the three laser sensors, namely the Leosphere ALS300 LIDAR, the Vaisala CL31 ceilometer and the Jenoptik CHM15K ceilometer; (ii) and the comparison of the backscatter profiles with twenty-three radiosoundings performed during the period from the 8th to the 15th of June, 2009. The sensor-independent Temporal Height-Tracking algorithm was applied to the backscatter profiles as retrieved by each instrument to determine the decoupled structure of the BL over Mace Head. The LIDAR and ceilometers-retrieved BL heights were compared to the radiosoundings temperature profiles. The comparison between the remote and the in-situ data proved the existence of the inherent link between temperature and aerosol backscatter profiles and opened at future studies focusing on the further assessment of LIDAR-ceilometer comparison. © 2012 Conor Milroy et al