The importance of capturing unmodified chondritic porous micrometeorites on the space station

The survival of interplanetary dust particles (IDP's) during deceleration by the Earth's atmosphere is determined by their entry parameters, velocity, size and mass. These IDP's reach their terminal velocity at about 55 to 95 km altitude before they gradually settle to 18 to 21 km altitude where they are collected by high flying aircraft. Chondritic porous IDP's (also called chondritic porous (CP) aggregates) show properties consistent with an extraterrestrial origin. It is conceivable that CP aggregates may be collected above the Earth's atmosphere using capture devices on a space station or satellite. In order to preserve pristine CP aggregates, i.e., aggregates with minimal perturbation or degradation of its particulate matter, it is necessary to transfer the kinetic energy on impact so that a minimum amount of energy is dissipated into the impacting particle. It is likely that low-temperature minerals (e.g., layer silicates), volatile phases (e.g., sulfides), structural defects (e.g. nuclear tracks) and hydrocarbons in CP aggregates are sensitive to the efficiency of kinetic energy dissipation

What predictions can be made on the nature of carbon and carbon-bearing compounds (hydrocarbons) in the interstellar medium based on studies of interplanetary dust particles?

The nature of hydrocarbons and properties of elemental carbon in circumstellar, interstellar, and interplanetary dust is a long standing problem in astronomy and meteorite research. The textures and crystallographical properties of poorly graphitized carbon (PGC) from carbonaceous chondrites and Chondritic Porous Aggregates (CPAs) are comparable with PGCs formed by dehydrogenation and carbonization of hydrocarbon precursors under natural terrestrial and experimental conditions. A multistage model of hydrocarbon diagenesis in CPA and carbonaceous chondrite (proto-) planetary parent bodies was proposed in which hydrocarbons are subjected to low temperature hydrous pyrolysis. Continued efforts to recognize hydrocarbons and elemental phases in CPAs may allow understanding of the multistage hydrocarbon/elemental carbon model

Chemical identification of comet 81P/Wild 2 dust after interacting with molten silica aerogel

Flight aerogel in Stardust allocation C2092,2,80,47,6 contains percent level concentrations of Na, Mg, Al, S, Cl, K, Ca, Cr, Mn, Fe, and Ni that have a distinctive Fe- and CI-normalized distribution pattern, which is similar to this pattern for ppb level chemical impurities in pristine aerogel. The elements in this aerogel background were assimilated in non-vesicular and vesicular glass with the numerous nanometer Fe-Ni-S compound inclusions. After correction for the background values, the chemical data show that this piece of comet Wild 2 dust was probably an aggregate of small (<500 nm) amorphous ferromagnesiosilica grains with many tiny Fe,Ni-sulfide inclusions plus small Ca-poor pyroxene grains. This distinctive Fe- and CI-normalized element distribution pattern is found in several Stardust allocations. It appears to be a common feature in glasses of quenched aerogel melts but its exact nature is yet to be established.The Meteoritics & Planetary Science archives are made available by the Meteoritical Society and the University of Arizona Libraries. Contact [email protected] for further information.Migrated from OJS platform February 202

Kinetics in a turbulent nebular cloud

Model calculations, which include the effects of turbulence during subsequent solar nebula evolution after the collapse of a cool interstellar cloud, can reconcile some of the apparent differences between physical parameters obtained from theory and the cosmochemical record. Two important aspects of turbulence in a protoplanetary cloud include the growth and transport of solid grains. While the physical effects of the process can be calculated and compared with the probable remains of the nebula formulation period, the more subtle effects on primitive grains and their survival in the cosmochemical record cannot be readily evaluated. The environment offered by the Space Station (or Space Shuttle) experimental facility can provide the vacuum and low gravity conditions for sufficiently long time periods required for experimental verification of these cosmochemical models

Comet 67P/Churyumov-Gerasimenko preserved the pebbles that formed planetesimals

Solar System formation models predict that the building-blocks of planetesimals were mm- to cm-sized pebbles, aggregates of ices and non-volatile materials, consistent with the compact particles ejected by comet 67P/Churyumov-Gerasimenko (67P hereafter) and detected by GIADA (Grain Impact Analyzer and Dust Accumulator) on-board the Rosetta spacecraft. Planetesimals were formed by the gentle gravitational accretion of pebbles, so that they have an internal macroporosity of 40%. We measure the average dust bulk density ${\rho}D = 795 _{-65}^{+840} kg m^{-3}$ that, coupled to the 67P nucleus bulk density, provides the average dust-to-ices mass ratio δ = 8.5. We find that the measured densities of the 67P pebbles are consistent with a mixture of (15 ± 6)% of ices, (5 ± 2)% of Fe-sulfides, (28 ± 5)% of silicates, and (52 ± 12)% of hydrocarbons, in average volume abundances. This composition matches both the solar and CI-chondritic chemical abundances, thus showing that GIADA has sampled the typical non-volatile composition of the pebbles that formed all planetesimals. The GIADA data do not constrain the abundance of amorphous silicates vs. crystalline Mg,Fe- olivines and pyroxenes. We find that the pebbles have a microporosity of (52 ± 8)% (internal volume filling factor φP = 0.48±0.08), implying an average porosity for the 67P nucleus of (71 ± 8)%, lower than previously estimated

The solar maximum satellite capture cell: Impact features and orbital debris and micrometeoritic projectile materials

The physical properties of impact features observed in the Solar Max main electronics box (MEB) thermal blanket generally suggest an origin by hypervelocity impact. The chemistry of micrometeorite material suggests that a wide variety of projectile materials have survived impact with retention of varying degrees of pristinity. Impact features that contain only spacecraft paint particles are on average smaller than impact features caused by micrometeorite impacts. In case both types of materials co-occur, it is belevied that the impact feature, generally a penetration hole, was caused by a micrometeorite projectile. The typically smaller paint particles were able to penetrate though the hole in the first layer and deposit in the spray pattern on the second layer. It is suggested that paint particles have arrived with a wide range of velocities relative to the Solar Max satellite. Orbiting paint particles are an important fraction of materials in the near-Earth environment. In general, the data from the Solar Max studies are a good calibration for the design of capture cells to be flown in space and on board Space Station. The data also suggest that development of multiple layer capture cells in which the projectile may retain a large degree of pristinity is a feasible goal

GIADA: shining a light on the monitoring of the comet dust production from the nucleus of 67P/Churyumov Gerasimenko

Context. During the period between 15 September 2014 and 4 February 2015, the Rosetta spacecraft accomplished the circular orbit phase around the nucleus of comet 67P/Churyumov-Gerasimenko (67P). The Grain Impact Analyzer and Dust Accumulator (GIADA) onboard Rosetta monitored the 67P coma dust environment for the entire period. Aims. We aim to describe the dust spatial distribution in the coma of comet 67P by means of in situ measurements. We determine dynamical and physical properties of cometary dust particles to support the study of the production process and dust environment modification. Methods. We analyzed GIADA data with respect to the observation geometry and heliocentric distance to describe the coma dust spatial distribution of 67P, to monitor its activity, and to retrieve information on active areas present on its nucleus. We combined GIADA detection information with calibration activity to distinguish different types of particles that populate the coma of 67P: compact particles and fluffy porous aggregates. By means of particle dynamical parameters measured by GIADA, we studied the dust acceleration region. Results. GIADA was able to distinguish different types of particles populating the coma of 67P: compact particles and fluffy porous aggregates. Most of the compact particle detections occurred at latitudes and longitudes where the spacecraft was in view of the comet’s neck region of the nucleus, the so-called Hapi region. This resulted in an oscillation of the compact particle abundance with respect to the spacecraft position and a global increase as the comet moved from 3.36 to 2.43 AU heliocentric distance. The speed of these particles, having masses from 10-10 to 10-7 kg, ranged from 0.3 to 12.2 m s−1. The variation of particle mass and speed distribution with respect to the distance from the nucleus gave indications of the dust acceleration region. The influence of solar radiation pressure on micron and submicron particles was studied. The integrated dust mass flux collected from the Sun direction, that is, particles reflected by solar radiation pressure, was three times higher than the flux coming directly from the comet nucleus. The awakening 67P comet shows a strong dust flux anisotropy, confirming what was suggested by on-ground dust coma observations performed in 2008

GIADA: its status after the Rosetta cruise phase and on-ground activity in support of the encounter with comet 67P/Churyumov-Gerasimenko

GIADA (Grain Impact Analyser and Dust Accumulator) on-board the Rosetta mission to comet 67P/Churyumov-Gerasimenko was designed to study the physical and dynamical properties of dust particles ejected by the comet during the encounter. In this paper we report the results of the analysis of data collected by GIADA during the past seven years of the cruise phase. During this period the GIADA detection subsystems were switched on for periodic in-flight payload checkouts to monitor their state of-health including potential changes in its performance that could affect its data collection. Only slight variations in sensitivity and dynamical range were identified that will not affect the GIADA measurement capability during the Rosetta comet encounter and rendezvous phase. The GIADA microbalance system detected the presence of low-volatility material over a period of about 169 days when the GIADA cover remained partially opened. It is highly probable that this material originated from the spacecraft itself, as a spacecraft’s outgassing was observed by the ROSINA mass spectrometer (on-board Rosetta) during the cruise phase. The identification of the low-volatility mass deposited on the microbalances as self-contamination will allow us to evaluate the mass rate background to be subtracted from the GIADA science data. These results obtained from GIADA cruise data analysis coupled with laboratory calibration data obtained from measurements using the GIADA spare model for selected cometary dust analogs will be the basis for the interpretation of the GIADA scientific data

67P/C-G inner coma dust properties from 2.2 au inbound to 2.0 auoutbound to the Sun

GIADA (Grain Impact Analyzer and Dust Accumulator) on-board the Rosetta space probe is designed to measure the momentum, mass and speed of individual dust particles escaping the nucleus of comet 67P/Churyumov-Gerasimenko (hereafter 67P). From 2014 August to 2016 June, Rosetta escorted comet 67P during its journey around the Sun. Here, we focus on GIADA data taken between 2015 January and 2016 February which included 67P's perihelion passage. To better understand cometary activity and more specifically the presence of dust structures in cometary comae, we mapped the spatial distribution of dust density in 67P's coma. In this manner, we could track the evolution of high-density regions of coma dust and their connections with nucleus illumination conditions, namely tracking 67P's seasons. We also studied the link between dust particle speeds and their masses with respect to heliocentric distance, i.e. the level of cometary activity. This allowed us to derive a global and a local correlation of the dust particles' speed distribution with respect to the H2O production rate. © 2016 The Authors.Peer Reviewe