125 research outputs found
Sediment dynamics in the subaquatic channel of the Rhone delta (Lake Geneva, France/Switzerland)
With its smaller size, well-known boundary conditions, and the availability of detailed bathymetric data, Lake Geneva's subaquatic canyon in the Rhone Delta is an excellent analogue to understand sedimentary processes in deep-water submarine channels. A multidisciplinary research effort was undertaken to unravel the sediment dynamics in the active canyon. This approach included innovative coring using the Russian MIR submersibles, in situ geotechnical tests, and geophysical, sedimentological, geochemical and radiometric analysis techniques. The canyon floor/levee complex is characterized by a classic turbiditic system with frequent spillover events. Sedimentary evolution in the active canyon is controlled by a complex interplay between erosion and sedimentation processes. In situ profiling of sediment strength in the upper layer was tested using a dynamic penetrometer and suggests that erosion is the governing mechanism in the proximal canyon floor while sedimentation dominates in the levee structure. Sedimentation rates progressively decrease down-channel along the levee structure, with accumulation exceeding 2.6cm/year in the proximal levee. A decrease in the frequency of turbidites upwards along the canyon wall suggests a progressive confinement of the flow through time. The multi-proxy methodology has also enabled a qualitative slope-stability assessment in the levee structure. The rapid sediment loading, slope undercutting and over-steepening, and increased pore pressure due to high methane concentrations hint at a potential instability of the proximal levees. Furthermore, discrete sandy intervals show very high methane concentrations and low shear strength and thus could correspond to potentially weak layers prone to scarp failures
Recommended from our members
Assessing the impact of a construction virtual reality game on design review skills of construction student
Being able to perform an effective design review is a fundamental skill that every design or construction student should possess. Performing a design review requires critical thinking, analysis, and communication skills. To support the acquisition of these skills, this study investigated the impact of a virtual reality game, the design review simulator (DRS), in a classroom environment. To assess the impact of the game, the authors performed a crossover experiment with 120 students. The students were split into groups and were asked to perform design reviews in two treatment conditions, 2D drawings or the DRS. A knowledge test was administered at the end of different treatments to collect quantitative data on the students’ performance. Results from this research indicate that the DRS supported students in identifying a higher number of design mistakes. Furthermore, students that played with the DRS after performing 2D drawings reviews scored significantly higher in the knowledge test. The research results contribute to the growing knowledge base on the implementation of VR in the classroom and in supporting students in meeting learning objectives related to design review skills. In particular, the research illustrated that the benefits of VR found in the construction industry in terms of improved communication, user involvement, and feedback collection could be translated into the classroom environment
In Vitro vs In Silico Detected SNPs for the Development of a Genotyping Array: What Can We Learn from a Non-Model Species?
Background: There is considerable interest in the high-throughput discovery and genotyping of single nucleotide polymorphisms (SNPs) to accelerate genetic mapping and enable association studies. This study provides an assessment of EST-derived and resequencing-derived SNP quality in maritime pine (Pinus pinaster Ait.), a conifer characterized by a huge genome size (~23.8 Gb/C). [br/]
Methodology/Principal Findings: A 384-SNPs GoldenGate genotyping array was built from i/ 184 SNPs originally detected in a set of 40 re-sequenced candidate genes (in vitro SNPs), chosen on the basis of functionality scores, presence of neighboring polymorphisms, minor allele frequencies and linkage disequilibrium and ii/ 200 SNPs screened from ESTs (in silico SNPs) selected based on the number of ESTs used for SNP detection, the SNP minor allele frequency and the quality of SNP flanking sequences. The global success rate of the assay was 66.9%, and a conversion rate (considering only polymorphic SNPs) of 51% was achieved. In vitro SNPs showed significantly higher genotyping-success and conversion rates than in silico SNPs (+11.5% and +18.5%, respectively). The reproducibility was 100%, and the genotyping error rate very low (0.54%, dropping down to 0.06% when removing four SNPs showing elevated error rates). [br/]
Conclusions/Significance: This study demonstrates that ESTs provide a resource for SNP identification in non-model species, which do not require any additional bench work and little bio-informatics analysis. However, the time and cost benefits of in silico SNPs are counterbalanced by a lower conversion rate than in vitro SNPs. This drawback is acceptable for population-based experiments, but could be dramatic in experiments involving samples from narrow genetic backgrounds. In addition, we showed that both the visual inspection of genotyping clusters and the estimation of a per SNP error rate should help identify markers that are not suitable to the GoldenGate technology in species characterized by a large and complex genome
First Description of Natural and Experimental Conjugation between Mycobacteria Mediated by a Linear Plasmid
Background: in a previous study, we detected the presence of a Mycobacterium avium species-specific insertion sequence, IS1245, in Mycobacterium kansasii. Both species were isolated from a mixed M. avium-M. kansasii bone marrow culture from an HIV-positive patient. the transfer mechanism of this insertion sequence to M. kansasii was investigated here.Methodology/Principal Findings: A linear plasmid (pMA100) was identified in all colonies isolated from the M. avium-M. kansasii mixed culture carrying the IS1245 element. the linearity of pMA100 was confirmed. Other analyses suggested that pMA100 contained a covalently bound protein in the terminal regions, a characteristic of invertron linear replicons. Partial sequencing of pMA100 showed that it bears one intact copy of IS1245 inserted in a region rich in transposase-related sequences. These types of sequences have been described in other linear mycobacterial plasmids. Mating experiments were performed to confirm that pMA100 could be transferred in vitro from M. avium to M. kansasii. pMA100 was transferred by in vitro conjugation not only to the M. kansasii strain from the mixed culture, but also to two other unrelated M. kansasii clinical isolates, as well as to Mycobacterium bovis BCG Moreau.Conclusions/Significance: Horizontal gene transfer (HGT) is one of most important mechanisms leading to the evolution and diversity of bacteria. This work provides evidence for the first time on the natural occurrence of HGT between different species of mycobacteria. Gene transfer, mediated by a novel conjugative plasmid, was detected and experimentally reproduced.Fundação de Amparo Ă Pesquisa do Estado de SĂŁo Paulo (FAPESP)Cooperacion Interuniversitaria UAM-Banco Santander con America Latina (CEAL), UAM, SpainConselho Nacional de Desenvolvimento CientĂfico e TecnolĂłgico (CNPq)Coordenação de Aperfeiçoamento de Pessoal de NĂvel Superior (CAPES)Universidade Federal de SĂŁo Paulo, Dept Microbiol Imunol & Parasitol, Escola Paulista Med, SĂŁo Paulo, BrazilLab Nacl Comp Cient, Petropolis, BrazilUniv Autonoma Madrid, Fac Med, Dept Prevent Med, Madrid, SpainInst Adolfo Lutz Registro, Nucleo TB & Micobacterioses, SĂŁo Paulo, BrazilUniversidade Federal de SĂŁo Paulo, Dept Microbiol Imunol & Parasitol, Escola Paulista Med, SĂŁo Paulo, BrazilFAPESP: FAPESP - 06/01533-9Web of Scienc
Rapport IV. b-2. Domaines d’application des automates hydrauliques
With present very rapid progress in the design of electrical and electronic control equipment for industrial mechanisms, the machine designer has a choice of reliable sets of equipment at his disposal for simple or complicated automatic systems applicable to electrically or electronically controlled hydraulic components, with which he can design new automatic hydraulic systems.
Three examples are given :
— A fully hydraulic very compact motor-car handling trolley.
— An automatic spring leaf forging machine with electrical control.
— An opening mechanism for furnaces requiring safèty slave systems of fairly advanced design.
An attempt is made to define the fields of application of automatic hydraulic systems and the development of such equipment.Les progrès étant actuellement très rapides dans le domaine des matériels électriques et électroniques de commande des mécanismes industriels, le constructeur de machines dispose d’ensembles sûrs pour la réalisation d’automatismes, même compliqués, applicables aux organes hydrauliques à commandes électriques ou électroniques qui lui permettent de concevoir de nouveaux automates hydrauliques.
Trois exemples sont donnés :
— le premier concerne la réalisation d’un chariot manipulateur de voitures d’un encombrement très réduit pour lequel la réalisation est entièrement hydraulique,
— le second concerne une machine automatique à forger des lames de ressorts, machine à commande électrique,
— le troisième concerne un mécanisme d’ouverture de fours qui nécessite des asservissements de sécurité assez poussés.
Les auteurs essaient de définir les domaines d’application des automates hydrauliques et l’évolution du matériel mis en œuvre.Cossin F., Gavriloff L., Le Dantec J., Sandier J. Rapport IV. b-2. Domaines d’application des automates hydrauliques. In: Le rôle de la mécanique des fluides dans les progrès récents des techniques. 1967
- …