Surface Energy and Lewis Acid-base Characteristics of Lignocellulosic Fibers upon Modification by Chemical Vapor Deposition of Trichloromethylsilane: An Inverse Gas Chromatography Study

Supplemental data for this article can be accessed on the publisher’s website at http:// dx.doi.org/10.1080/02773813.2018.1454961The surface of a thermomechanical pulp (TMP), containing 26 wt% of lignin, was modified by silanization with trichloromethylsilane (TCMS) via chemical vapor deposition, and thoroughly analyzed for its physicochemical properties by inverse gas chromatography (attenuated total reflection-Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy being used as complementary tools). For a 2-min TCMS-treated TMP, a decrease of the dispersive component of the surface energy from 38 to 14 mJ m−2 (at 40°C), and, at the same time, an increase of the Lewis acidic and Lewis basic characters were found. The surface of this sample, modified in a high extent, was similar to that of a bleached kraft pulp (<0.1 wt% of lignin) subjected to the same silanization process, which is suggested as being due, in both cases, to the formation of a methyl-silica coating on the fiber’s surface. The new silanized fibers obtained from cheap TMP can be used for the production of a new generation of biocomposites with a variety of matrices

Investigation of the Effects of Hydrodynamic and Parasitic Electrostatic Forces on the Dynamics of a High Aspect Ratio MEMS Accelerometer

AbstractWe present the results of an extensive characterization of physical and electrostatic effects influencing the dynamical behavior of a micro-electromechanical (MEMS) accelerometer based on commercial technology. A similar device has been utilized recently to demonstrate the effect of Casimir and other nano-scale interactions on the pull-in distance [Ardito et. al., Microelectron. Reliab., 52 (2012) 271]. In the present work, we focus on the influence of pressure, plate separation, and electric surface potentials on the spectral mechanical response. We finally find evidence for the presence of non-viscous damping due to compressibility of the ambient gas, and demonstrate a strong dependence of the sensitivity on the parameters of the operating point

Medical needs related to the endoscopic technology and colonoscopy for colorectal cancer diagnosis

Background. The high incidence and mortality rate of colorectal cancer require new technologies to improve its early diagnosis. This study aims at extracting the medical needs related to the endoscopic technology and the colonoscopy procedure currently used for colorectal cancer diagnosis, essential for designing these demanded technologies. Methods. Semi-structured interviews and an online survey were used. Results. Six endoscopists were interviewed and 103 were surveyed, obtaining the demanded needs that can be divided into: a) clinical needs, for better polyp detection and classification (especially flat polyps), location, size, margins and penetration depth; b) computer-aided diagnosis (CAD) system needs, for additional visual information supporting polyp characterization and diagnosis; and c) operational/physical needs, related to limitations of image quality, colon lighting, flexibility of the endoscope tip, and even poor bowel preparation.This work is part of the PICCOLO project, which has received funding from the European Union’s Horizon 2020 research and innovation Programme under grant agreement No. 732111. GR18199, funded by “Consejería de Economía, Ciencia y Agenda Digital, Junta de Extremadura” and co-funded by European Union (ERDF “A way to make Europe”). The funding bodies did not play any roles in the design of the study and collection, analysis, and interpretation of data and in writing the manuscript

Three axis vector magnet set-up for cryogenic scanning probe microscopy

We describe a three axis vector magnet system for cryogenic scanning probe microscopy measurements. We discuss the magnet support system and the power supply, consisting of a compact three way 100 A current source. We obtain tilted magnetic fields in all directions with maximum value of 5T along z-axis and of 1.2T for XY-plane magnetic fields. We describe a scanning tunneling microscopy-spectroscopy (STM-STS) set-up, operating in a dilution refrigerator, which includes a new high voltage ultralow noise piezodrive electronics and discuss the noise level due to vibrations. STM images and STS maps show atomic resolution and the tilted vortex lattice at 150 mK in the superconductor β-Bi2Pd. We observe a strongly elongated hexagonal lattice, which corresponds to the projection of the tilted hexagonal vortex lattice on the surface. We also discuss Magnetic Force Microscopy images in a variable temperature insertThis work was supported by Convocatoria Doctorados en el Exterior 568-2012 COLCIENCIAS, the Spanish MINECO (FIS2011-23488, MAT2011-27470-C02-02, CSD2009-00013), by the Comunidad de Madrid through program Nanofrontmag-CM (S2013/MIT-2850) and by Marie-Curie actions under the project FP7-PEOPLE-2013- CIG-618321. The research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement No. 604391 Graphene Flagship. We also acknowledge Banco Santander, COST MP1201. J.A. and C.M. acknowledge the FPI (BES- 2012-058600) and Juan de la Cierva (JCI-2011-08815) programs, respectivel

Observation of a gel of quantum vortices in a superconductor at very low magnetic fields

A gel consists of a network of particles or molecules formed for example using the sol-gel process, by which a solution transforms into a porous solid. Particles or molecules in a gel are mainly organized on a scaffold that makes up a porous system. Quantized vortices in type-II superconductors mostly form spatially homogeneous ordered or amorphous solids. Here we present high-resolution imaging of the vortex lattice displaying dense vortex clusters separated by sparse or entirely vortex-free regions in β-Bi2Pd superconductor. We find that the intervortex distance diverges upon decreasing the magnetic field and that vortex lattice images follow a multifractal behavior. These properties, characteristic of gels, establish the presence of a novel vortex distribution, distinctly different from the well-studied disordered and glassy phases observed in high-temperature and conventional superconductors. The observed behavior is caused by a scaffold of one-dimensional structural defects with enhanced stress close to the defects. The vortex gel might often occur in type-II superconductors at low magnetic fields. Such vortex distributions should allow to considerably simplify control over vortex positions and manipulation of quantum vortex states.Fil: Llorens, José Benito. Universidad Autónoma de Madrid; EspañaFil: Embon, Lior. Weizmann Institute Of Science.; IsraelFil: Correa, Alexandre. Consejo Superior de Investigaciones Científicas; España. Instituto de Ciencia de Materiales de Madrid; EspañaFil: González, Jesús David. Universidad del Magdalena; Colombia. Universiteit Antwerp; BélgicaFil: Herrera, Edwin. Universidad Autónoma de Madrid; España. Universidad Central; ColombiaFil: Guillamón, Isabel. Universidad Autónoma de Madrid; EspañaFil: Luccas, Roberto F.. Consejo Superior de Investigaciones Científicas; EspañaFil: Azpeitia, Jon. Consejo Superior de Investigaciones Científicas; EspañaFil: Mompeán, Federico J.. Consejo Superior de Investigaciones Científicas; EspañaFil: García Hernández, Mar. Consejo Superior de Investigaciones Científicas; EspañaFil: Munuera, Carmen. Consejo Superior de Investigaciones Científicas; EspañaFil: Aragón Sánchez, Jazmín. Comisión Nacional de Energía Atómica. Gerencia del Area de Investigación y Aplicaciones No Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Bajas Temperaturas; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche | Comisión Nacional de Energía Atómica. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche; ArgentinaFil: Fasano, Yanina. Comisión Nacional de Energía Atómica. Gerencia del Area de Investigación y Aplicaciones No Nucleares. Gerencia de Física (Centro Atómico Bariloche). División Bajas Temperaturas; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche | Comisión Nacional de Energía Atómica. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología. Unidad Ejecutora Instituto de Nanociencia y Nanotecnología - Nodo Bariloche; ArgentinaFil: Milosevic, Milorad V.. Universiteit Antwerp; BélgicaFil: Suderow, Hermann. Universidad Autónoma de Madrid; EspañaFil: Anahory, Yonathan. The Hebrew University of Jerusalem; Israe

Charge density wave in layered La1-xCexSb2

The layered rare-earth diantimonides RSb2 are anisotropic metals with generally low electronic densities whose properties can be modified by substituting the rare earth. LaSb2 is a nonmagnetic metal with a low residual resistivity presenting a low-temperature magnetoresistance that does not saturate with the magnetic field. It has been proposed that the latter can be associated to a charge density wave (CDW), but no CDW has yet been found. Here we find a kink in the resistivity above room temperature in LaSb2 (at 355 K) and show that the kink becomes much more pronounced with substitution of La by Ce along the La1-xCexSb2 series. We find signatures of a CDW in x-ray scattering, specific heat, and scanning tunneling microscopy (STM) experiments in particular for x≈0.5. We observe a distortion of rare-earth-Sb bonds lying in-plane of the tetragonal crystal using x-ray scattering, an anomaly in the specific heat at the same temperature as the kink in resistivity and charge modulations in STM. We conclude that LaSb2 has a CDW which is stabilized in the La1-xCexSb2 series due to substitutional disorder.E.H. acknowledges the support of Departamento Administrativo de Ciencia, Tecnología e Innovación, COL-CIENCIAS (Colombia) Programa Doctorados en el Exterior Convocatoria 568-2012. This work was supported by the Spanish MINECO (FIS2014-54498-R, MAT2011-27470-C02-02, and CSD-2009-00013), by the European Union (Graphene Flagship Contract No. CNECT-ICT-604391 and COST MP1201 action), and by the Comunidad de Madrid through programs Nanofrontmag-CM (S2013/MIT-2850) and MAD2D-CM (S2013/MIT-3007). We acknowledge MINECO and CSIC for financial support and for provision of synchrotron radiation facilities and would like to thank the SpLine BM25 staff for assistance in using the beamline

Charge density wave in layered La1-xCexSb2

The layered rare-earth diantimonides RSb2 are anisotropic metals with generally low electronic densities whose properties can be modified by substituting the rare earth. LaSb2 is a nonmagnetic metal with a low residual resistivity presenting a low-temperature magnetoresistance that does not saturate with the magnetic field. It has been proposed that the latter can be associated to a charge density wave (CDW), but no CDW has yet been found. Here we find a kink in the resistivity above room temperature in LaSb2 (at 355 K) and show that the kink becomes much more pronounced with substitution of La by Ce along the La1−xCexSb2 series. We find signatures of a CDW in x-ray scattering, specific heat, and scanning tunneling microscopy (STM) experiments in particular for x ≈ 0.5. We observe a distortion of rare-earth–Sb bonds lying in-plane of the tetragonal crystal using x-ray scattering, an anomaly in the specific heat at the same temperature as the kink in resistivity and charge modulations in STM. We conclude that LaSb2 has a CDW which is stabilized in the La1−xCexSb2 series due to substitutional disorderThis work was supported by the Spanish MINECO (FIS2014-54498-R, MAT2011-27470-C02-02, and CSD-2009-00013), by the European Union (Graphene Flagship Contract No. CNECT-ICT-604391 and COST MP1201 action), and by the Comunidad de Madrid through programs Nanofrontmag-CM (S2013/MIT-2850) and MAD2D-CM (S2013/MIT-3007).We acknowledge MINECO and CSIC for financial support and for provision of synchrotron radiation facilities and would like to thank the SpLine BM25 staff for assistance in using the beamlin

Ingeniería Geológica en Terrenos Volcánicos. Métodos, Técnicas y Experiencias en las Islas Canarias

La presente obra es un compendio de conceptos, metodologías y técnicas útiles para acometer proyectos y obras en terrenos volcánicos desde el punto de vista de la ingeniería geológica y la geotecnia. El libro se presenta en tres partes diferenciadas. La primera es conceptual y metodológica, con capítulos que tratan sobre la clasificación de las rocas volcánicas con fines geotécnicos, la caracterización geomecánica, los problemas geotécnicos y constructivos asociados a los distintos materiales, y una guía metodológica para la redacción de informes geotécnicos para la edificación. La segunda parte aborda las aplicaciones a obras de ingeniería, incluyendo deslizamientos, obras subterráneas,infraestructuras marítimas y obras públicas. La tercera parte recoge capítulos dedicados a describir distintos casos prácticos de obras y proyectos en los que la problemática geotécnica en terrenos volcánicos ha tenido un papel relevante. Los capítulos han sido elaborados por técnicos y científicos de reconocido prestigio en el campo de la ingeniería geológica en terrenos volcánicos, que han plasmado en ellos sus conocimientos y experiencias en la materia.Los editores y autores de parte de los capítulos del libro, los Doctores Luis E. Hernández Gutiérrez (Geólogo) y Juan Carlos Santamarta Cerezal (Ingeniero de Montes, Civil y Minas), son los responsables del grupo de investigación INGENIA (Ingeniería Geológica, Innovación y Aguas). Su actividad investigadora comprende más de 200 publicaciones en el área de la ingeniería geológica, la geotecnia, medio ambiente y el aprovechamiento del agua en islas y terrenos volcánicos. En relación a la docencia han impartido y dirigido más de 90 seminarios y cursos de especialización a nivel nacional e internacional, incluyendo la organización de 4 congresos internacionales. Fueron premiados por la Universidad de La Laguna en los años 2012, 2013 y 2014 por su calidad docente e innovación universitaria, y son pioneros en los laboratorios virtuales para la enseñanza de la ingeniería. Participan activamente como profesores colaboradores e investigadores en varias universidades e instituciones españolas e internacionales. Todas sus publicaciones están disponibles en internet, con libre acceso. Ingeniería geológica en terrenos volcánicos, es una obra de gran interés para, consultores, técnicos de administraciones públicas, proyectistas y demás profesionales implicados en obras y proyectos de infraestructuras en terrenos volcánicos; también es útil para académicos y estudiantes de ingeniería o ciencias geológicas que quieran investigar o iniciarse en las singularidades que presentan los materiales volcánicos en la edificación o en la ingeniería civil y minera

Evolving Sensitivity Balances Boolean Networks

We investigate the sensitivity of Boolean Networks (BNs) to mutations. We are interested in Boolean Networks as a model of Gene Regulatory Networks (GRNs). We adopt Ribeiro and Kauffman’s Ergodic Set and use it to study the long term dynamics of a BN. We define the sensitivity of a BN to be the mean change in its Ergodic Set structure under all possible loss of interaction mutations. Insilico experiments were used to selectively evolve BNs for sensitivity to losing interactions. We find that maximum sensitivity was often achievable and resulted in the BNs becoming topologically balanced, i.e. they evolve towards network structures in which they have a similar number of inhibitory and excitatory interactions. In terms of the dynamics, the dominant sensitivity strategy that evolved was to build BNs with Ergodic Sets dominated by a single long limit cycle which is easily destabilised by mutations. We discuss the relevance of our findings in the context of Stem Cell Differentiation and propose a relationship between pluripotent stem cells and our evolved sensitive networks