5,139 research outputs found

    Phase composition and transformations in magnetron-sputtered (Al,V)2O3 coatings

    Full text link
    Coatings of (Al1-xVx)2O3, with x ranging from 0 to 1, were deposited by pulsed DC reactive sputter deposition on Si(100) at a temperature of 550 {\deg}C. XRD showed three different crystal structures depending on V-metal fraction in the coating: {\alpha}-V2O3 rhombohedral structure for 100 at.% V, a defect spinel structure for the intermediate region, 63 - 42 at.% V. At lower V-content, 18 and 7 at.%, a gamma-alumina-like solid solution was observed, shifted to larger d-spacing compared to pure {\gamma}-Al2O3. The microstructure changes from large columnar faceted grains for {\alpha}-V2O3 to smaller equiaxed grains when lowering the vanadium content toward pure {\gamma}-Al2O3. Annealing in air resulted in formation of V2O5 crystals on the surface of the coating after annealing to 500 {\deg}C for 42 at.% V and 700 {\deg}C for 18 at.% V metal fraction respectively. The highest thermal stability was shown for pure {\gamma}-Al2O3-coating, which transformed to {\alpha}-Al2O3 after annealing to 1100{\deg} C. Highest hardness was observed for the Al-rich oxides, ~24 GPa. The latter decreased with increasing V-content, larger than 7 at.% V metal fraction. The measured hardness after annealing in air decreased in conjunction with the onset of further oxidation of the coatings

    The algorithm for FIR corrections of the VELO analogue links and its performance

    Get PDF
    The data from the VELO front-end is sent to the ADCs on the read-out board over a serial analogue link. Due imperfections in the link, inter-symbol cross talk occurs between adjacent time-bins in the transfer. This is corrected by an FIR filter implemented in the pre-processing FPGA locacted on the read-out board. This note reports on a method to determine the coefficients for the filter using date taken in-situ. Simulations are presented that show the performance of the methods as it is implemented in the LHCb read-out board. The effectiveness of the algorithm is demonstrated by the improvements in tracking performance on beam test data it brings

    Mapping of serum amylase-1 and quantitative trait loci for milk production traits to cattle chromosome 4

    Get PDF
    The present study was undertaken to confirm and refine the mapping of a quantitative trait locus in cattle for milk fat percentage that had earlier been reported to be linked to the serum amylase-1 locus, AM1. Five half-sib families from the previous study and 7 new ones were genotyped for nine microsatellite markers spanning chromosome 4. AM1 was mapped between the microsatellite markers BMS648 and BR6303. In a granddaughter design, interval mapping based on multiple-marker regression was utilized for an analysis of five milk production traits: milk yield, fat percentage and yield, and protein percentage and yield. In the families reported on previously, significant effects for fat and protein percentages were detected. In the new families, an effect on milk and fat yields was found. The most likely positions of the quantitative trait locus in both groups of families were in the same area of chromosome 4 in the vicinity of the obese locus. Direct effects of the obese locus were tested for using polymorphism in two closely linked microsatellites located 2.5 and 3.6 top downstream of the coding sequence. No firm evidence was found for an association between the obese locus and the tested traits

    Social physique anxiety and physical activity in early adolescent girls : the influence of maturation and physical activity motives

    Get PDF
    This study considered the influence of maturation on social physique anxiety (SPA), the relationship between SPA and current and future physical activity (PA) levels and the influence of motives for physical activity on this relationship in early adolescent girls (n=162; mean age=11.80±0.33 years). Participants completed the Pubertal Development Scale, the modified Social Physique Anxiety Scale and the Motives for Physical Activity Scale at baseline and the Physical Activity Questionnaire for Older Children at baseline and 6 months later. The girls became less active across the 6 months and girls in the early stages of maturation had significantly lower SPA than the girls in the middle and late stages of maturation. SPA was not related to current or future physical activity in the sample as a whole. Cluster analysis identified four groups with different motive profiles and the High Appearance and Fitness group demonstrated a moderate negative relationship between SPA and PA at phase 1, whereas the other groups did not. These findings indicate that SPA may increase with maturation and the relationship between SPA and PA is dependent on reasons for being active. For girls who are motivated to be active primarily by body-related reasons SPA is likely to lead to lower levels of PA

    Electronic structure investigation of Ti3AlC2, Ti3SiC2, and Ti3GeC2 by soft-X-ray emission spectroscopy

    Full text link
    The electronic structures of epitaxially grown films of Ti3AlC2, Ti3SiC2 and Ti3GeC2 have been investigated by bulk-sensitive soft X-ray emission spectroscopy. The measured high-resolution Ti L, C K, Al L, Si L and Ge M emission spectra are compared with ab initio density-functional theory including core-to-valence dipole matrix elements. A qualitative agreement between experiment and theory is obtained. A weak covalent Ti-Al bond is manifested by a pronounced shoulder in the Ti L-emission of Ti3AlC2. As Al is replaced with Si or Ge, the shoulder disappears. For the buried Al and Si-layers, strongly hybridized spectral shapes are detected in Ti3AlC2 and Ti3SiC2, respectively. As a result of relaxation of the crystal structure and the increased charge-transfer from Ti to C, the Ti-C bonding is strengthened. The differences between the electronic structures are discussed in relation to the bonding in the nanolaminates and the corresponding change of materials properties.Comment: 15 pages, 8 figure

    Stochastic Model for Surface Erosion Via Ion-Sputtering: Dynamical Evolution from Ripple Morphology to Rough Morphology

    Get PDF
    Surfaces eroded by ion-sputtering are sometimes observed to develop morphologies which are either ripple (periodic), or rough (non-periodic). We introduce a discrete stochastic model that allows us to interpret these experimental observations within a unified framework. We find that a periodic ripple morphology characterizes the initial stages of the evolution, whereas the surface displays self-affine scaling in the later time regime. Further, we argue that the stochastic continuum equation describing the surface height is a noisy version of the Kuramoto-Sivashinsky equation.Comment: 4 pages, 7 postscript figs., Revtex, to appear in Phys. Rev. Let

    Bioclipse-R: integrating management and visualization of life science data with statistical analysis

    Get PDF
    SUMMARY: Bioclipse, a graphical workbench for the life sciences, provides functionality for managing and visualizing life science data. We introduce Bioclipse-R, which integrates Bioclipse and the statistical programming language R. The synergy between Bioclipse and R is demonstrated by the construction of a decision support system for anticancer drug screening and mutagenicity prediction, which shows how Bioclipse-R can be used to perform complex tasks from within a single software system. Availability and implementation: Bioclipse-R is implemented as a set of Java plug-ins for Bioclipse based on the R-package rj. Source code and binary packages are available from https://github.com/bioclipse and http://www.bioclipse.net/bioclipse-r, respectively. CONTACT: [email protected] SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online
    corecore