Sensitivity studies for a space-based methane lidar mission

Methane is the third most important greenhouse gas in the atmosphere after water vapour and carbon dioxide. A major handicap to quantify the emissions at the Earth's surface in order to better understand biosphere-atmosphere exchange processes and potential climate feedbacks is the lack of accurate and global observations of methane. Space-based integrated path differential absorption (IPDA) lidar has potential to fill this gap, and a Methane Remote Lidar Mission (MERLIN) on a small satellite in polar orbit was proposed by DLR and CNES in the frame of a German-French climate monitoring initiative. System simulations are used to identify key performance parameters and to find an advantageous instrument configuration, given the environmental, technological, and budget constraints. The sensitivity studies use representative averages of the atmospheric and surface state to estimate the measurement precision, i.e. the random uncertainty due to instrument noise. Key performance parameters for MERLIN are average laser power, telescope size, orbit height, surface reflectance, and detector noise. A modest-size lidar instrument with 0.45 W average laser power and 0.55 m telescope diameter on a 506 km orbit could provide 50-km averaged methane column measurement along the sub-satellite track with a precision of about 1% over vegetation. The use of a methane absorption trough at 1.65 μm improves the near-surface measurement sensitivity and vastly relaxes the wavelength stability requirement that was identified as one of the major technological risks in the pre-phase A studies for A-SCOPE, a space-based IPDA lidar for carbon dioxide at the European Space Agency. Minimal humidity and temperature sensitivity at this wavelength position will enable accurate measurements in tropical wetlands, key regions with largely uncertain methane emissions. In contrast to actual passive remote sensors, measurements in Polar Regions will be possible and biases due to aerosol layers and thin ice clouds will be minimised

Enhanced relativistic-electron beam collimation using two consecutive laser pulses

The double laser pulse approach to relativistic electron beam (REB) collimation has been investigated at the LULI-ELFIE facility. In this scheme, the magnetic field generated by the first laser-driven REB is used to guide a second delayed REB. We show how electron beam collimation can be controlled by properly adjusting laser parameters. By changing the ratio of focus size and the delay time between the two pulses we found a maximum of electron beam collimation clearly dependent on the focal spot size ratio of the two laser pulses and related to the magnetic field dynamics. Cu-K alpha and CTR imaging diagnostics were implemented to evaluate the collimation effects on the respectively low energy ( MeV) components of the REB

The prediction of future from the past: an old problem from a modern perspective

The idea of predicting the future from the knowledge of the past is quite natural when dealing with systems whose equations of motion are not known. Such a long-standing issue is revisited in the light of modern ergodic theory of dynamical systems and becomes particularly interesting from a pedagogical perspective due to its close link with Poincar\'e's recurrence. Using such a connection, a very general result of ergodic theory - Kac's lemma - can be used to establish the intrinsic limitations to the possibility of predicting the future from the past. In spite of a naive expectation, predictability results to be hindered rather by the effective number of degrees of freedom of a system than by the presence of chaos. If the effective number of degrees of freedom becomes large enough, regardless the regular or chaotic nature of the system, predictions turn out to be practically impossible. The discussion of these issues is illustrated with the help of the numerical study of simple models.Comment: 9 pages, 4 figure

Scanning deflectometric form measurement avoiding path-dependent angle measurement errors

For the highly accurate topography measurement of nearly flat optical surfaces, scanning deflectometric methods are capable of achieving nanometer accuracy. In these systems, an autocollimator is typically used as the deflectometric sensor and a pentaprism is applied for the scanning process. When ultimate accuracy is desired, a drawback of these systems is that the autocollimator output signal often depends slightly on the optical path length, resulting in topography errors during scanning. Here, we present a new deflectometric method which separates the angle measurement from the scanning process and, thereby, avoids possible errors due to different optical path lengths. In contrast to conventional deflectometry, the new technique achieves an almost exact autocollimation by appropriately tilting the specimen during scanning. The tilt angle necessary to achieve autocollimation complies with the deflectometric angle determined in conventional deflectometry. The tilt angle is measured with an additional autocollimator at a fixed distance without errors due to different optical path lengths. The separation of angle measurement and the scanning process enable both tasks to be optimized independently. This opens up new possibilities of reducing lateral resolution by facilitating smaller apertures and of assessing topographies with larger curvatures. The concept was tested successfully by a demonstrator setup. The first measurements on a test specimen agree with results obtained with the established Extended Shear Angle Difference (ESAD) technique at the one nanometer level

Gaming with eutrophication: Contribution to integrating water quantity and quality management at catchment level

The Metropolitan Region of Sao Paulo (MRSP) hosts 18 million inhabitants. A complex system of 23 interconnected reservoirs was built to ensure its water supply. Half of the potable water produced for MRSP's population (35 m3/s) is imported from a neighbour catchment, the other half is produced within the Alto Tietê catchment, where 99% of the population lives. Perimeters of land use restriction were defined to contain uncontrolled urbanization, as domestic effluents were causing increasing eutrophication of some of these reservoirs. In the 90's catchment committees and sub committees were created to promote discussion between stakeholders and develop catchment plans. The committees are very well structured "on paper". However, they are not very well organised and face a lack of experience. The objective of this work was to design tools that would strengthen their discussion capacities. The specific objective of the AguAloca process was to integrate the quality issue and its relation to catchment management as a whole in these discussions. The work was developed in the Alto Tietê Cabeceiras sub-catchment, one of the 5 sub catchments of the Alto-Tietê. It contains 5 interconnected dams, and presents competitive uses such as water supply, industry, effluent dilution and irrigated agriculture. A RPG was designed following a companion modelling approach (Etienne et al., 2003). It contains a friendly game-board, a set of individual and collective rules and a computerized biophysical model. The biophysical model is used to simulate water allocation and quality processes at catchment level. It articulates 3 modules. A simplified nutrient discharge model permits the estimation of land use nutrient exportation. An arc-node model simulates water flows and associated nutrient charges from one point of the hydrographical network to another. The Vollenweider model is used for simulating specific reservoir dynamics. The RPG allows players to make individual and collective decisions related to water allocation and the management of its quality. Impacts of these decisions are then simulated using the biophysical model. Specific indicators of the game are then updated and may influence player's behaviour (actions) in following rounds. To introduce discussions on the management of water quality at a catchment level, an issue that is rarely explicitly dealt with, four game sessions were implemented involving representatives of basin committees and water and sanitation engineers. During the game session, the participants took advantage of the water quality output of the biophysical model to test management alternatives such as rural sewage collection or effluent dilution. The biophysical model accelerated calculations of flows and eutrophication rates that were then returned to the game board with explicit indicators of quantity and quality. Players could easily test decisions impacting on qualitative water processes and visualize the simulation results directly on the game board that was representing a friendly, virtual and simplified catchment. The Agualoca game proved its ability to turn complex water processes understandable for a non totally initiated public. This experience contributed to a better understanding of multiple-use water management and also of joint management of water quality and quantity. (Résumé d'auteur

Analysis of a random modulation single photon counting differential absorption lidar system for space-borne atmospheric CO2 sensing

The ability to observe the Earth’s carbon cycles from space provides scientists an important tool to analyze climate change. Current proposed systems are mainly based on pulsed integrated path differential absorption lidar, in which two high energy pulses at different wavelengths interrogate the atmosphere sequentially for its transmission properties and are back-scattered by the ground. In this work an alternative approach based on random modulation single photon counting is proposed and analyzed; this system can take advantage of a less power demanding semiconductor laser in intensity modulated continuous wave operation, benefiting from a better efficiency, reliability and radiation hardness. Our approach is validated via numerical simulations considering current technological readiness, demonstrating its potential to obtain a 1.5 ppm retrieval precision for 50 km averaging with 2.5 W average power in a space-borne scenario. A major limiting factor is the ambient shot noise, if ultra-narrow band filtering technology could be applied, 0.5 ppm retrieval precision would be attainable

First airborne water vapor lidar measurements in the tropical upper troposphere and mid-latitudes lower stratosphere: accuracy evaluation and intercomparisons with other instruments

In the tropics, deep convection is the major source of uncertainty in water vapor transport to the upper troposphere and into the stratosphere. Although accurate measurements in this region would be of first order importance to better understand the processes that govern stratospheric water vapor concentrations and trends in the context of a changing climate, they are sparse because of instrumental shortcomings and observational challenges. Therefore, the Falcon research aircraft of the Deutsches Zentrum für Luft- und Raumfahrt (DLR) flew a zenith-viewing water vapor differential absorption lidar (DIAL) during the Tropical Convection, Cirrus and Nitrogen Oxides Experiment (TROCCINOX) in 2004 and 2005 in Brazil. The measurements were performed alternatively on three water vapor absorption lines of different strength around 940 nm. These are the first aircraft DIAL measurements in the tropical upper troposphere and in the mid-latitudes lower stratosphere. Sensitivity analyses reveal an accuracy of 5% between altitudes of 8 and 16 km. This is confirmed by intercomparisons with the Fast In-situ Stratospheric Hygrometer (FISH) and the Fluorescent Advanced Stratospheric Hygrometer (FLASH) onboard the Russian M-55 Geophysica research aircraft during five coordinated flights. The average relative differences between FISH and DIAL amount to −3%±8% and between FLASH and DIAL to −8%±14%, negative meaning DIAL is more humid. The average distance between the probed air masses was 129 km. The DIAL is found to have no altitude- or latitude-dependent bias. A comparison with the balloon ascent of a laser absorption spectrometer gives an average difference of 0%±19% at a distance of 75 km. Six tropical DIAL under-flights of the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) on board ENVISAT reveal a mean difference of −8%±49% at an average distance of 315 km. While the comparison with MIPAS is somewhat less significant due to poorer comparison conditions, the agreement with the in-situ hygrometers provides evidence of the excellent quality of FISH, FLASH and DIAL. Most DIAL profiles exhibit a smooth exponential decrease of water vapor mixing ratio in the tropical upper troposphere to lower stratosphere transition. The hygropause with a minimum mixing ratio of 2.5 µmol/mol is found between 15 and 17 km. A high-resolution (2 km horizontal, 0.2 km vertical) DIAL cross section through the anvil outflow of tropical convection shows that the ambient humidity is increased by a factor of three across 100 km

Mixing of mineral dust with urban pollution aerosol over Dakar (Senegal): Impact on dust physico-chemical and radiative properties.

In the framework of the Saharan Mineral Dust Experiment (SAMUM) in 2008, the mixing of the urban pollution plume of Dakar (Senegal) with mineral dust was studied in detail using the German research aircraft Falcon which was equipped with a nadir-looking high spectral resolution lidar (HSRL) and extensive aerosol in situ instrumentation. The mineral dust layer as well as the urban pollution plume were probed remotely by the HSRL and in situ. Back trajectory analyses were used to attribute aerosol samples to source regions.We found that the emission from the region of Dakar increased the aerosol optical depth (532 nm) from approximately 0.30 over sea and over land east of Dakar to 0.35 in the city outflow. In the urban area, local black carbon (BC) emissions, or soot respectively, contributed more than 75% to aerosol absorption at 530 nm. In the dust layer, the single-scattering albedo at 530 nm was 0.96 â�� 0.99, whereas we found a value of 0.908 �± 0.018 for the aerosol dominated by urban pollution. After 6h of transport over the North Atlantic, the externally mixed mode of secondary aerosol particles had almost completely vanished, whereas the BC agglomerates (soot) were still externally mixed with mineral dust particles

Axion-like-particle search with high-intensity lasers

We study ALP-photon-conversion within strong inhomogeneous electromagnetic fields as provided by contemporary high-intensity laser systems. We observe that probe photons traversing the focal spot of a superposition of Gaussian beams of a single high-intensity laser at fundamental and frequency-doubled mode can experience a frequency shift due to their intermittent propagation as axion-like-particles. This process is strongly peaked for resonant masses on the order of the involved laser frequencies. Purely laser-based experiments in optical setups are sensitive to ALPs in the $\mathrm{eV}$ mass range and can thus complement ALP searches at dipole magnets.Comment: 25 pages, 2 figure