15 research outputs found
Effect of the doping method on the sintering characteristics of Gadolinium-doped Ceria
Ce0.8Gd0.2O2-d (GDC) is considered one of the most promising electrolyte for intermediate temperature solid oxide fuel cell (IT-SOFC). The reduction of the sintering temperature is one of the most important challenge for the production of fully dense electrolyte. The sintering behaviour of a ceramic body is strongly related to the morphological characteristics of the initial powders and can be affected by the presence of a sintering aid. The latter can be added to the main phase using several methods, ball milling and precipitation being the most generally used. The paper aims to study the influence of the doping method and of the morphology of the dopant on the sintering characteristics of GDC. GDC powders with different specific surface area were doped with 3mol% CuO via ball milling and via nitrate salt and their sintering process followed by dilatometric measurements. The results indicate that the sintering is strongly dependent on the ratio between the specific surface area of pure GDC and CuO. Moreover, the morphology of the dopant greatly affects the sintering rate. Unexpectedly, ball milling was found to be the most effective doping method for CuO-doped GDC leading to a dense electrolyte at temperature as low as 900?
Densification behaviour of screen printed Gadolinia doped Ceria films: effect of CuO
The effect of CuO on the densification of a Gadolinia doped Ceria (Ce0.8Gd0.2O2-d, GDC) deposited by screen printing on a GDC/NiO anode produced by tape casting was considered aiming to a complete co-firing of the anode-electrolyte half cell. A comparative study on a CuO-doped and undoped GDC revealed that the effect of CuO is strongly dependent on the thickness of the deposited layer and can lower of more than 100?C the temperature of co-firing of the anode-electrolyte half-cell. Chemical analysis did not reveal traces of CuO on the sintered GDC layer indicating that the oxide should evaporate from the electrolyte layer during sintering not affecting in this way its electrochemical propertie
Influence of doping on the structural transformations of the proton conducting perovskite BaCe1 xYxO3-δ
From neutron diffraction it is known that the BaCeO3 perovskite undergoes a sequence of phase transformations from high temperature cubic C to rhombohedral R, to orthorhombic O1 (Imma) and to orthorhombic O2 (Pnma). Doping Y3+ on the Ce4+ site introduces charge compensating O vacancies (VO) that may be partially filled with OH complexes with exposition to H2O, so making the material an ionic conductor. Anelastic relaxation experiments have been carried out on samples doped with 2%Y and 10%Y; the real part s\u27(T) of the complex elastic compliance presents softenings at the transitions, and the loss s\u27\u27/s\u27 curves allow the content of VO and H to be monitored. Doping has a strong effect on the temperature of the Pnma/R transition: with 10%Y in the fully hydrated state TO1-R increases up to 750 K while after full outgassing falls to 500 K, meaning that the introduction of ~5% VO shifts the transition of 250 K. While the effect of cation substitution on the transitions temperature is easily explained in terms of simple arguments usually valid for perovskites based on bond length considerations, the remarkable stabilization of the R phase by VO requires to take into account the anomalous sequence of phase transitions of undoped BaCeO3, where the R structure transforms into orthorhombic Pnma on cooling with the loss of an octahedral tilt syste
FIRB "SQUARE" project: nano-structured sensors for the detection of the polluting in engine exhaust gases and for indoor air quality monitoring
The present work is a final dissemination of activities carried out and main results obtained in the national founded project Firb "Square". The project is leaded by Centro Ricerche Fiat and it involves the most qualified national public Research Institutes and Universities active in the fields of nanomaterials synthesis, nanotechnology and gas sensors development
What is the role of the placebo effect for pain relief in neurorehabilitation? Clinical implications from the Italian consensus conference on pain in neurorehabilitation
Background: It is increasingly acknowledged that the outcomes of medical treatments are influenced by the context of the clinical encounter through the mechanisms of the placebo effect. The phenomenon of placebo analgesia might be exploited to maximize the efficacy of neurorehabilitation treatments. Since its intensity varies across neurological disorders, the Italian Consensus Conference on Pain in Neurorehabilitation (ICCP) summarized the studies on this field to provide guidance on its use. Methods: A review of the existing reviews and meta-analyses was performed to assess the magnitude of the placebo effect in disorders that may undergo neurorehabilitation treatment. The search was performed on Pubmed using placebo, pain, and the names of neurological disorders as keywords. Methodological quality was assessed using a pre-existing checklist. Data about the magnitude of the placebo effect were extracted from the included reviews and were commented in a narrative form. Results: 11 articles were included in this review. Placebo treatments showed weak effects in central neuropathic pain (pain reduction from 0.44 to 0.66 on a 0-10 scale) and moderate effects in postherpetic neuralgia (1.16), in diabetic peripheral neuropathy (1.45), and in pain associated to HIV (1.82). Moderate effects were also found on pain due to fibromyalgia and migraine; only weak short-term effects were found in complex regional pain syndrome. Confounding variables might have influenced these results. Clinical implications: These estimates should be interpreted with caution, but underscore that the placebo effect can be exploited in neurorehabilitation programs. It is not necessary to conceal its use from the patient. Knowledge of placebo mechanisms can be used to shape the doctor-patient relationship, to reduce the use of analgesic drugs and to train the patient to become an active agent of the therapy
What is the role of the placebo effect for pain relief in neurorehabilitation? Clinical implications from the Italian Consensus Conference on Pain in Neurorehabilitation
Background: It is increasingly acknowledged that the outcomes of medical treatments are influenced by the context of the clinical encounter through the mechanisms of the placebo effect. The phenomenon of placebo analgesia might be exploited to maximize the efficacy of neurorehabilitation treatments. Since its intensity varies across neurological disorders, the Italian Consensus Conference on Pain in Neurorehabilitation (ICCP) summarized the studies on this field to provide guidance on its use. Methods: A review of the existing reviews and meta-analyses was performed to assess the magnitude of the placebo effect in disorders that may undergo neurorehabilitation treatment. The search was performed on Pubmed using placebo, pain, and the names of neurological disorders as keywords. Methodological quality was assessed using a pre-existing checklist. Data about the magnitude of the placebo effect were extracted from the included reviews and were commented in a narrative form. Results: 11 articles were included in this review. Placebo treatments showed weak effects in central neuropathic pain (pain reduction from 0.44 to 0.66 on a 0-10 scale) and moderate effects in postherpetic neuralgia (1.16), in diabetic peripheral neuropathy (1.45), and in pain associated to HIV (1.82). Moderate effects were also found on pain due to fibromyalgia and migraine; only weak short-term effects were found in complex regional pain syndrome. Confounding variables might have influenced these results. Clinical implications: These estimates should be interpreted with caution, but underscore that the placebo effect can be exploited in neurorehabilitation programs. It is not necessary to conceal its use from the patient. Knowledge of placebo mechanisms can be used to shape the doctor-patient relationship, to reduce the use of analgesic drugs and to train the patient to become an active agent of the therapy
Electrochemical investigation on the phosphine rhenium complexes [ReCl3(PMe2Ph)3] and [ReCl4(PMe2Ph)2] in an aprotic medium
The cathodic and anodic behaviour of the complexes [ReCl3(PMe2Ph)3] and [ReCl4(PMe2Ph)2] has been studied at platinum and mercury electrodes in acetonitrile solvent. The reduction and oxidation products have been identified and both thermodynamic and kinetic aspects of the involved electrode mechanisms have been studied. In particular, new rhenium derivatives such as [ReCl3(PMe2Ph)3]+. [ReCl4(PMe2Ph)2] 12 and [ReCl3(PMe2Ph)2(MeCN)]+, have been prepared. In addition the species [ReCl4(PMe2Ph)2] has been obtained in a yield higher than that obtained by conventional chemical methods. The EView the MathML source values of several redox couples of rhenium complexes have been calculated and compared with the corresponding values of the technetium ones; the stability of analogous rhenium and technetium compounds has been also discussed