Thin-film quantum dot photodiode for monolithic infrared image sensors

Imaging in the infrared wavelength range has been fundamental in scientific, military and surveillance applications. Currently, it is a crucial enabler of new industries such as autonomous mobility (for obstacle detection), augmented reality (for eye tracking) and biometrics. Ubiquitous deployment of infrared cameras (on a scale similar to visible cameras) is however prevented by high manufacturing cost and low resolution related to the need of using image sensors based on flip-chip hybridization. One way to enable monolithic integration is by replacing expensive, small-scale III-V-based detector chips with narrow bandgap thin-films compatible with 8- and 12-inch full-wafer processing. This work describes a CMOS-compatible pixel stack based on lead sulfide quantum dots (PbS QD) with tunable absorption peak. Photodiode with a 150-nm thick absorber in an inverted architecture shows dark current of 10(-6) A/cm(2) at 2 V reverse bias and EQE above 20% at 1440 nm wavelength. Optical modeling for top illumination architecture can improve the contact transparency to 70%. Additional cooling (193 K) can improve the sensitivity to 60 dB. This stack can be integrated on a CMOS ROIC, enabling order-of-magnitude cost reduction for infrared sensors

Optimization of charge carrier extraction in colloidal quantum dots short-wave infrared photodiodes through optical engineering

Colloidal quantum dots (QDs) have attracted scientific interest for infrared (IR) optoelectronic devices due to their bandgap tunability and the ease of fabrication on arbitrary substrates. In this work, short-wave IR photodetectors based on lead sulfide (PbS) QDs with high detectivity and low dark current is demonstrated. Using a combination of time-resolved photoluminescence, carrier transport, and capacitance-voltage measurements, it is proved that the charge carrier diffusion length in the QD layer is negligible such that only photogenerated charges in the space charge region can be collected. To maximize the carrier extraction, an optical model for PbS QD-based photodiodes is developed, and through optical engineering, the cavity at the wavelength of choice is optimized. This universal optimization recipe is applied to detectors sensitive to wavelengths above 1.4 mu m, leading to external quantum efficiency of 30% and specific detectivity (D*) in the range of 10(12) Jones

Hevin is down-regulated in many cancers and is a negative regulator of cell growth and proliferation

We have cloned a human Hevin cDNA from omental adipose tissue of different patients by reverse transcription polymerase chain reaction and shown a sequence variation due to a possible polymorphism at amino acid position 161 (E/G). Hevin protein expressed in vitro showed molecular weights of approximately 75 kDa and 150 kDa, suggesting that Hevin may form a homodimer in vitro. Using Northern blots and a human expressed sequence tAg database analysis, Hevin was shown to be widely expressed in human normal or non-neoplastic diseased tissues with various levels. In contrast to this, its expression was strongly down-regulated in most neoplastic cells or tissues tested. However, neither the mechanism nor the physiological meaning of this down-regulation is known. As an initial step towards investigating the functional role of Hevin in cell growth and differentiation, we transiently or stably expressed this gene in cancer cells (HeLa 3S) that are devoid of endogenous Hevin and measured DNA synthesis (cell proliferation) by 5-bromo-2′-deoxyuridine incorporation. Hevin was shown to be a negative regulator of cell proliferation. Furthermore, we have shown that Hevin can inhibit progression of cells from G1 to S phase or prolong G1 phase. This is the first report which describes the function of Hevin in cell growth and proliferation. Through database analysis, Hevin was found to be located on chromosome 4 which contains loss of heterozygosity of many tumour suppressor genes. Taken together, these results suggest that Hevin may be a candidate for a tumour suppressor gene and a potential target for cancer diagnosis/therapy. © 2000 Cancer Research Campaig

Monolithic near infrared image sensors enabled by quantum dot photodetector

status: publishe

Near-field interactions between metal nanoparticle surface plasmons and molecular excitons in thin-films: part I: absorption

In this and the following paper (parts I and II, respectively), we systematically study the interactions between surface plasmons of metal nanoparticles (NPs) with excitons in thin-films of organic media. In an effort to exclusively probe near-field interactions, we utilize spherical Ag NPs in a size-regime where far-field light scattering is negligibly small compared to absorption. In part I, we discuss the effect of the presence of these Ag NPs on the absorption of the embedding medium by means of experiment, numerical simulations, and analytical calculations, all shown to be in good agreement. We observe absorption enhancement in the embedding medium due to the Ag NPs with a strong dependence on the medium permittivity, the spectral position relative to the surface plasmon resonance frequency, and the thickness of the organic layer. By introducing a low index spacer layer between the NPs and the organic medium, this absorption enhancement is experimentally confirmed to be a near field effect In part II, we probe the impact of the Ag NPs on the emission of organic molecules by time-resolved and steady-state photoluminescence measurements

Displacement of polarons by vibrational modes in doped conjugated polymers

Organic pi-conjugated polymers are deemed to be soft materials with strong electron-phonon coupling, which results in the formation of polarons, i.e., charge carriers dressed by self-localized distortion of the nuclei. Universal signatures for polarons are optical resonances below the band gap and intense vibrational modes (IVMs), both found in the infrared (IR) spectral region. Here, we study p-doped conjugated homo-and copolymers by combining first-principles modelling and optical spectroscopy from the far-IR to the visible. Polaronic IVMs are found to feature absorption intensities comparable to purely electronic transitions and, most remarkably, show only loose resemblance to the Raman or IR-active modes of the neutral polymer. The IVM frequency is dramatically scaled down (up to 50%) compared to the backbone carbon-stretching modes in the pristine polymers. The very large intensity of IVMs is associated with displacement of the excess positive charge along the backbone driven by specific vibrational modes. We propose a quantitative picture for the identification of these polaron shifting modes that solely based on structural information, directly correlates with their IR intensity. This finding finally discloses the elusive microscopic mechanism behind the huge IR intensity of IVMs in doped polymeric semiconductors

β-Phase Morphology in Ordered Poly(9,9-dioctylfluorene) Nanopillars by Template Wetting Method

An efficient method based in template wetting is applied for fabrication of ordered Poly(9,9-dioctylfluorene) (PFO) nanopillars with β-phase morphology. In this process, nanoporous alumina obtained by anodization process is used as template. PFO nanostructures are prepared under ambient conditions via infiltration of the polymeric solution into the pores of the alumina with an average pore diameter of 225 nm and a pore depth of 500 nm. The geometric features of the resulting structures are characterized with environmental scanning electron microscopy (ESEM), luminescence fluorimeter (PL) and micro μ-X-ray diffractometer (μ-XRD). The characterization demonstrates the β-phase of the PFO in the nanopillars fabricated. Furthermore, the PFO nanopillars are characterized by Raman spectroscopy to study the polymer conformation. These ordered nanostructures can be used in optoelectronic applications such as polymer light-emitting diodes, sensors and organic solar cells

Population exposure to trace elements in the Kilembe copper mine area, Western Uganda: a pilot study

The mining and processing of copper in Kilembe, Western Uganda, from 1956 to 1982 left over 15 Mt. of tailings containing cupriferous and cobaltiferous pyrite dumped within a mountain river valley. This pilot study was conducted to assess the nature and extent of risk to local populations from metal contamination arising from those mining activities. We determined trace element concentrations in mine tailings, soils, locally cultivated foods,house dust, drinking water and human biomarkers (toenails) using ICP-MS analysis of acid digested samples. The results showed that tailings, containing higher concentrations of Co, Cu, Ni and As compared with world average crust values had eroded and contaminated local soils. Pollution load indices revealed that 51% of agricultural soils sampled were contaminated with trace elements. Local water supplies were contaminated, with Co concentrations that exceeded Wisconsin (US) thresholds in 25% of domestic water supplies and 40% of Nyamwamba river water samples. Zinc exceeded WHO/FAO thresholds of 99.4 mg kg−1 in 36% of Amaranthus vegetable samples, Cu exceeded EC thresholds of 20 mg kg−1 in 19% of Amaranthus while Pb exceeded WHO thresholds of 0.3 mg kg−1 in 47% of Amaranthus vegetables. In bananas, 20% of samples contained Pb concentrations that exceeded the WHO/FAO recommended threshold of 0.3 mg kg−1. However, risk assessment of local foods and water, based on hazard quotients (HQ values) revealed no potential health effects. The high external contamination of volunteers' toenails with some elements (even after a washing process) calls into question their use as a biomarker for metal exposure in human populations where feet are frequently exposed to soil