Safety and efficacy of fluoxetine on functional outcome after acute stroke (AFFINITY): a randomised, double-blind, placebo-controlled trial

Background Trials of fluoxetine for recovery after stroke report conflicting results. The Assessment oF FluoxetINe In sTroke recoverY (AFFINITY) trial aimed to show if daily oral fluoxetine for 6 months after stroke improves functional outcome in an ethnically diverse population. Methods AFFINITY was a randomised, parallel-group, double-blind, placebo-controlled trial done in 43 hospital stroke units in Australia (n=29), New Zealand (four), and Vietnam (ten). Eligible patients were adults (aged ≥18 years) with a clinical diagnosis of acute stroke in the previous 2–15 days, brain imaging consistent with ischaemic or haemorrhagic stroke, and a persisting neurological deficit that produced a modified Rankin Scale (mRS) score of 1 or more. Patients were randomly assigned 1:1 via a web-based system using a minimisation algorithm to once daily, oral fluoxetine 20 mg capsules or matching placebo for 6 months. Patients, carers, investigators, and outcome assessors were masked to the treatment allocation. The primary outcome was functional status, measured by the mRS, at 6 months. The primary analysis was an ordinal logistic regression of the mRS at 6 months, adjusted for minimisation variables. Primary and safety analyses were done according to the patient's treatment allocation. The trial is registered with the Australian New Zealand Clinical Trials Registry, ACTRN12611000774921. Findings Between Jan 11, 2013, and June 30, 2019, 1280 patients were recruited in Australia (n=532), New Zealand (n=42), and Vietnam (n=706), of whom 642 were randomly assigned to fluoxetine and 638 were randomly assigned to placebo. Mean duration of trial treatment was 167 days (SD 48·1). At 6 months, mRS data were available in 624 (97%) patients in the fluoxetine group and 632 (99%) in the placebo group. The distribution of mRS categories was similar in the fluoxetine and placebo groups (adjusted common odds ratio 0·94, 95% CI 0·76–1·15; p=0·53). Compared with patients in the placebo group, patients in the fluoxetine group had more falls (20 [3%] vs seven [1%]; p=0·018), bone fractures (19 [3%] vs six [1%]; p=0·014), and epileptic seizures (ten [2%] vs two [<1%]; p=0·038) at 6 months. Interpretation Oral fluoxetine 20 mg daily for 6 months after acute stroke did not improve functional outcome and increased the risk of falls, bone fractures, and epileptic seizures. These results do not support the use of fluoxetine to improve functional outcome after stroke

A Flexible, Wearable, and Wireless Biosensor Patch with Internet of Medical Things Applications

Monitoring the vital signs and physiological responses of the human body in daily activities is particularly useful for the early diagnosis and prevention of cardiovascular diseases. Here, we proposed a wireless and flexible biosensor patch for continuous and longitudinal monitoring of different physiological signals, including body temperature, blood pressure (BP), and electrocardiography. Moreover, these modalities for tracking body movement and GPS locations for emergency rescue have been included in biosensor devices. We optimized the flexible patch design with high mechanical stretchability and compatibility that can provide reliable and long-term attachment to the curved skin surface. Regarding smart healthcare applications, this research presents an Internet of Things-connected healthcare platform consisting of a smartphone application, website service, database server, and mobile gateway. The IoT platform has the potential to reduce the demand for medical resources and enhance the quality of healthcare services. To further address the advances in non-invasive continuous BP monitoring, an optimized deep learning architecture with one-channel electrocardiogram signals is introduced. The performance of the BP estimation model was verified using an independent dataset; this experimental result satisfied the Association for the Advancement of Medical Instrumentation, and the British Hypertension Society standards for BP monitoring devices. The experimental results demonstrated the practical application of the wireless and flexible biosensor patch for continuous physiological signal monitoring with Internet of Medical Things-connected healthcare applications

Roles of Chitosan in Green Synthesis of Metal Nanoparticles for Biomedical Applications

Chitosan (CS) is a well-known stabilizer for metal nanoparticles in biomedical engineering. However, very few studies have explored other important roles of CS including reducing, shape-directing, and size-controlling. This review aims to provide the latest and most comprehensive overview of the roles of CS in the green synthesis of metal nanoparticles for biomedical applications. To the best of our knowledge, this is the first review that highlights these potentialities of CS. At first, a brief overview of the properties and the bioactivity of CS is presented. Next, the benefits of CS for enhancing the physicochemical behaviors of metal nanoparticles are discussed in detail. The representative biomedical applications of CS-metal nanoparticles are also given. Lastly, the review outlines the perceptual vision for the future development of CS-metal nanoparticles in the biomedicine field

Roles of Chitosan in Green Synthesis of Metal Nanoparticles for Biomedical Applications

Chitosan (CS) is a well-known stabilizer for metal nanoparticles in biomedical engineering. However, very few studies have explored other important roles of CS including reducing, shape-directing, and size-controlling. This review aims to provide the latest and most comprehensive overview of the roles of CS in the green synthesis of metal nanoparticles for biomedical applications. To the best of our knowledge, this is the first review that highlights these potentialities of CS. At first, a brief overview of the properties and the bioactivity of CS is presented. Next, the benefits of CS for enhancing the physicochemical behaviors of metal nanoparticles are discussed in detail. The representative biomedical applications of CS-metal nanoparticles are also given. Lastly, the review outlines the perceptual vision for the future development of CS-metal nanoparticles in the biomedicine field

Design Of Deep Learning Model Applied For Smart Parking System

This article proposes and introduces a smart parking system using RFID technology incorporating a Deep Learning model to identify license plates. It tries to simulate the ability of the brain to recognize, differ- entiate and learn patterns from data. The employed algorithms are mainly based on neural network mod- els where neurons are organized in stacked layers. The system is designed to manage incoming and outgoing vehicles by collecting and processing images and data on passenger information to update parking status with the news of empty lots. Another function of the park- ing system also designed is a fully automatic method of paying the parking fee by the user. The deep learning model for the smart parking system is implemented us- ing the Raspberry PI 3 embedded system and sensors. Experimental results with the plate identification rate in the worst condition, up to 80%, have proven the re- liability of the proposed smart parking system. In terms of quantity, the percentage of the worst plate identifi- cation down to 10% has established the stability of the proposed smart parking system

Simple and cost-effective way to make mobile antibiotic cement spacer: hand-made silicone mold

Background: Two-stage exchange arthroplasty is considered the most common approach for the management of prosthetic joint infections. There has been plentiful evidence to support the superiority of the mobile spacers over the static ones. Unfortunately, articulating options are not available in our low-resource environment, which motivated us to come up with an affordable way to create a mobile cement spacer. After experimenting with a variety of materials and producing methods, we realized that silicone is a favorable material for mold building and established a simple process of making a handmade silicone mold. We demonstrate the clinical outcomes of three prosthetic joint infections by using these spacers in the hope of spreading the idea to our colleagues who work in the circumstances of a developing country. Construction of the spacer molds: The molds, consisting of two parts, were shaped by using high viscosity addition silicone (elite HD+ putty soft, Zhermack SpA, Italy) as material, and previously removed implants as template. They were sterilized using ethylene oxide treatment before being ready for casting antibiotic-loaded bone cement spacer. Case report: Three cases of prosthetic infection were treated with two-stage revision, using antibiotic-impregnated cement spacer cast in hand-made silicone molds. We sought to determine intraoperative complications, postoperative range of motion, and functional scores. All the patients were regularly followed up to identify fractures or dislocation of the spacer, and reinfection. Results: At the end of the follow-up, all three patients had the infection eradicated. The three patients could sit comfortably with bent knees, walk with partial weight-bearing, and achieve 75–80 degrees of knee flexion in the first week after surgery. Follow-up X-rays revealed no fractures or dislocation in any of the spacers. Conclusion: Silicone molds offer a simple and cost-effective alternative to costly commercial products in producing articulating spacers. Treating infected joints arthroplasty with these spacers allows for early motion and partial weight bearing and improves patient satisfaction and life quality before reimplantation without significant complications

Examining the relationship between tourism, trade, and income: evidence from Vietnam

Vietnam's tourism industry has been one of the economy's key growth drivers for years. This study examines the relationship between international tourist arrivals, bilateral trade, and income in Vietnam by applying a cointegration model with the panel data of Vietnam and its major global tourism markets. The results show that export and per capita income significantly influence Vietnam's international tourist arrivals from 2008 to 2019. The study also uses causality techniques to test for the direction of causality and found a two-way causal effect from exports and income to international tourist arrivals. These findings suggest that future economic policy should focus more on tourism and trade-related to sustain the growth of the tourism industry and generate more foreign exchange earnings for Vietnam

Simple and cost-effective way to make mobile antibiotic cement spacer: hand-made silicone mold

Background: Two-stage exchange arthroplasty is considered the most common approach for the management of prosthetic joint infections. There has been plentiful evidence to support the superiority of the mobile spacers over the static ones. Unfortunately, articulating options are not available in our low-resource environment, which motivated us to come up with an affordable way to create a mobile cement spacer. After experimenting with a variety of materials and producing methods, we realized that silicone is a favorable material for mold building and established a simple process of making a handmade silicone mold. We demonstrate the clinical outcomes of three prosthetic joint infections by using these spacers in the hope of spreading the idea to our colleagues who work in the circumstances of a developing country. Construction of the spacer molds: The molds, consisting of two parts, were shaped by using high viscosity addition silicone (elite HD+ putty soft, Zhermack SpA, Italy) as material, and previously removed implants as template. They were sterilized using ethylene oxide treatment before being ready for casting antibiotic-loaded bone cement spacer. Case report: Three cases of prosthetic infection were treated with two-stage revision, using antibiotic-impregnated cement spacer cast in hand-made silicone molds. We sought to determine intraoperative complications, postoperative range of motion, and functional scores. All the patients were regularly followed up to identify fractures or dislocation of the spacer, and reinfection. Results: At the end of the follow-up, all three patients had the infection eradicated. The three patients could sit comfortably with bent knees, walk with partial weight-bearing, and achieve 75–80 degrees of knee flexion in the first week after surgery. Follow-up X-rays revealed no fractures or dislocation in any of the spacers. Conclusion: Silicone molds offer a simple and cost-effective alternative to costly commercial products in producing articulating spacers. Treating infected joints arthroplasty with these spacers allows for early motion and partial weight bearing and improves patient satisfaction and life quality before reimplantation without significant complications

Spontaneous spinal epidural hematoma: Two cases report and the literature review

Spontaneous spinal epidural hematoma (SSEH) is a rare disease but may lead to life-threatening consequences if not timely diagnosed and managed. Emergent hematoma evacuation is indicated before neurological deficits become irreversible. We report two cases. The first case was a 45-year-old man brought to hospital because of an acute onset of quadriparesis and urinary incontinence. His cervical magnetic resonance imaging (MRI) showed an epidural hematoma at the C5-C6 level with severe spinal cord compression. He underwent an emergency C5-C6 right hemi-laminotomy to remove the clot and decompress the cord. Postoperatively, his left-sided deficits immediately resolved. His urinary function returned to normal two weeks after the surgery. He could independently walk two months later. The second case was a 57-year-old man admitted to the hospital because of severe neck pain and paresthesia in both arms. He had been using an antiplatelet for two months. His MRI revealed an epidural hematoma from C2 to C4 with spinal cord compression on the right. This patient was successfully treated with conservative treatment. If SSEH is left undiagnosed and untreated, the neurological deficits may be permanent. Early emergent hematoma evacuation contributes to a favorable outcome. Conservative management is reasonable if neurological deficits are not severe

Superiority of left heart deformation in early anthracycline-related cardiac dysfunction detection

Objective This study aimed to assess the incidence of early cancer therapy-related cardiac dysfunction (CTRCD) and the characteristics of left and right heart deformations during anthracycline chemotherapy.Methods We prospectively enrolled a cohort of 351 chemotherapy-naïve women with breast cancer and cardiovascular risk factors who were scheduled to receive anthracycline. The left ventricular ejection fraction (LVEF), left ventricular global longitudinal strain (LV-GLS) and right ventricular and left atrial longitudinal strains were evaluated using echocardiography at baseline, before every subsequent cycles and at 3 weeks after the final anthracycline dose. CTRCD was defined as a new LVEF reduction by ≥10 percentage points to an LVEF&lt;50% and/or a new relative decline in GLS by &gt;15% from the baseline value.Results Eighteen (5.1%) patients had evidence of asymptomatic CTRCD during anthracycline treatment, and 50% developed CTRCD before completing the chemotherapy regimen. In the CTRCD group, while LV-GLS decrease significantly after the first dose of anthracycline, the reduction of right ventricular free-wall longitudinal strain and left atrial reservoir strain were observed after the second dose. Other strain indices could not be used to identify early CTRCD.Conclusions Cardiotoxicity appeared soon after the initiation of anthracycline chemotherapy. Among the left-heart and right-heart mechanics, LV-GLS remains the best deformation indicator for detecting early CTRCD