Development and in-vitro Evaluation of a Topical Drug Delivery System Containing Betamethazone Loaded Ethyl Cellulose Nanospheres

Purpose: Lipid nanospheres are used for the passive targeting of cosmetic agents to skin, thereby achieving major benefits such as reduction of total dose and avoidance of systemic absorption. The present study was carried out to exploit the feasibility of using polymeric nanospheres as an alternative and cheaper carrier for targeting corticosteroids to the skin. Methods: Nanospheres were prepared from ethyl cellulose by a modified method of desolvation and cross linking. The drug betamethazone was incorporated into nanospheres and the drug: polymer ratio was evaluated to determine the carrier capacity of the polymer. In-vitro release studies of drug-loaded nanospheres were carried out by the centrifugal ultrafiltration method. The kinetics of release was determined and fitted to an empirical equation. The release of drug from drug-loaded nanospheres dispersing in a conventional cream was evaluated. A comparative in-vitro diffusion study was carried out between a commercial brand of cream and the cream incorporating nanospheres. Results: Formulation of nanospheres of betamethazone by a modified method produced discrete particles. Studies on drug:polymer ratio showed a linear relationship between drug concentration and percentage of loading. The in-vitro release of drug-loaded nanospheres was found to be first order. The comparative in-vitro diffusion study between the commercial cream and the formulated cream showed a marked reduction in release rate from nanospheres-bound cream. Conclusion: Formulated topical cream containing nanospheres of betamethazone was found to be a potential dermal delivery system for sustaining the release of the drug. Keywords: Nanospheres, desolvation and cross-linking method, ethyl cellulose, betamethazone, in-vitro diffusion studies.> Tropical Journal of Pharmaceutical Research Vol. 4 (2) 2005: pp. 495-50

High growth rate 4H-SiC epitaxial growth using dichlorosilane in a hot-wall CVD reactor

Thick, high quality 4H-SiC epilayers have been grown in a vertical hot-wall chemical vapor deposition system at a high growth rate on (0001) 80 off-axis substrates. We discuss the use of dichlorosilane as the Si-precursor for 4H-SiC epitaxial growth as it provides the most direct decomposition route into SiCl2, which is the predominant growth species in chlorinated chemistries. A specular surface morphology was attained by limiting the hydrogen etch rate until the system was equilibrated at the desired growth temperature. The RMS roughness of the grown films ranged from 0.5-2.0 nm with very few morphological defects (carrots, triangular defects, etc.) being introduced, while enabling growth rates of 30-100 \mum/hr, 5-15 times higher than most conventional growths. Site-competition epitaxy was observed over a wide range of C/Si ratios, with doping concentrations < 1x1014 cm-3 being recorded. X-ray rocking curves indicated that the epilayers were of high crystallinity, with linewidths as narrow as 7.8 arcsec being observed, while microwave photoconductive decay (\muPCD) measurements indicated that these films had high injection (ambipolar) carrier lifetimes in the range of 2 \mus

Ternary Cu2SnS3: synthesis, structure, photoelectrochemical activity, and heterojunction band offset and alignment

Ternary Cu2SnS3 (CTS) is an attractive nontoxic and earth-abundant absorber material with suitable optoelectronic properties for cost-effective photoelectrochemical applications. Herein, we report the synthesis of high-quality CTS nanoparticles (NPs) using a low-cost facile hot injection route, which is a very simple and nontoxic synthesis method. The structural, morphological, optoelectronic, and photoelectrochemical (PEC) properties and heterojunction band alignment of the as-synthesized CTS NPs have been systematically characterized using various state-of-the-art experimental techniques and atomistic first-principles density functional theory (DFT) calculations. The phase-pure CTS NPs confirmed by X-ray diffraction (XRD) and Raman spectroscopy analyses have an optical band gap of 1.1 eV and exhibit a random distribution of uniform spherical particles with size of approximately 15–25 nm as determined from high-resolution transmission electron microscopy (HR-TEM) images. The CTS photocathode exhibits excellent photoelectrochemical properties with PCE of 0.55% (fill factor (FF) = 0.26 and open circuit voltage (Voc) = 0.54 V) and photocurrent density of −3.95 mA/cm2 under AM 1.5 illumination (100 mW/cm2). Additionally, the PEC activities of CdS and ZnS NPs are investigated as possible photoanodes to create a heterojunction with CTS to enhance the PEC activity. CdS is demonstrated to exhibit a higher current density than ZnS, indicating that it is a better photoanode material to form a heterojunction with CTS. Consistently, we predict a staggered type-II band alignment at the CTS/CdS interface with a small conduction band offset (CBO) of 0.08 eV compared to a straddling type-I band alignment at the CTS/ZnS interface with a CBO of 0.29 eV. The observed small CBO at the type-II band aligned CTS/CdS interface points to efficient charge carrier separation and transport across the interface, which are necessary to achieve enhanced PEC activity. The facile CTS synthesis, PEC measurements, and heterojunction band alignment results provide a promising approach for fabricating next-generation Cu-based light-absorbing materials for efficient photoelectrochemical applications

Knowledge transfer in product development: an analysis of Brazilian subsidiaries of multinational corporations

Several studies about knowledge transfer in multinational corporations have found that the process is influenced by factors such as absorptive capacity, tacit knowledge and power relations, all of which impact knowledge sharing strategies between corporate headquarters and foreign subsidiaries. A multiple case study of Brazilian subsidiaries of three multinational corporations using in-depth interviews, based on a conceptual model consisting of four propositions, was conducted to identify factors linked to the knowledge transfer process and to assess their influence on that transfer. The first proposition tries to assess explicit knowledge, primarily through the use of IT tools; the second analyzes the role of the subsidiary within the corporate network and how it influences the degree of knowledge sharing. The third assesses the influence of subsidiary absorptive capacity and the fourth analyzes the impact of worker exchange programs on knowledge sharing between headquarters and foreign subsidiaries. Study results confirm the four propositions and enable the identification of relationships between factors, especially explicit knowledge and worker expatriation as complementary factors in knowledge transfer strategies

Trust, control and knowledge transfer in small business networks

The ability to transfer knowledge effectively in the networks of small and medium-sized firms (SMEs) is paramount for supporting firm competitiveness. Our research is the first one that explores the joint effect of trust and control mechanisms on knowledge transfer in the case of networks of SMEs. We use a multiple case study approach based on six Italian networks of SMEs. We analyse the joint impact of different ethical based trustworthiness factors—namely benevolence and integrity—and the levers of control (LOCs)—namely, belief, boundary, diagnostic and interactive LOCs—on knowledge transfer between SMEs in networks. We find that trust substitutes for the implementation of boundary, diagnostic, and belief tools, while it works jointly with interactive tools in order to support knowledge transfer. These insights not only provide a rich foundation for follow-up research, but also inform SME managers about how to increase the effectiveness and efficiency of knowledge transfer with their network partners

Mu2e Technical Design Report

The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the preliminary design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2 approval.Comment: compressed file, 888 pages, 621 figures, 126 tables; full resolution available at http://mu2e.fnal.gov; corrected typo in background summary, Table 3.