Analysis of seismically-isolated two-block systems using a multi–rocking-body dynamic model

A novel multibody rocking model is developed to investigate the dynamic response of two stacked rigid blocks placed on a linear base isolation device. The model is used to investigate the dynamic response of a realistic statue-pedestal system subject to pulse-like ground motions. The analysis shows that, in general, base isolation increases the safety level of the rocking system. However, for large period pulses or small size blocks, the isolator can amplify the ground motion, resulting in a lower minimum overturning acceleration than for the nonisolated system. Further, the amplification or shock spectrum of a linear mass-dashpot-spring oscillator, was found to be the reciprocal of the minimum nondimensional overturning acceleration of the investigated rocking system. Novel rocking spectra are obtained by normalizing the frequency of the pulse by the frequency of the isolator. The analysis also demonstrates how the dynamic response of the two stacked blocks is equivalent to that of a single-block configuration coincident with the whole system assumed monolithic or the upper block alone, whichever is more slender

Shot noise measurements in NS junctions and the semiclassical theory

We present a new analysis of shot noise measurements in normal metal-superconductor (NS) junctions [X. Jehl et al., Nature 405, 50 (2000)], based on a recent semiclassical theory. The first calculations at zero temperature assuming quantum coherence predicted shot noise in NS contacts to be doubled with respect to normal contacts. The semiclassical approach gives the first opportunity to compare data and theory quantitatively at finite voltage and temperature. The doubling of shot noise is predicted up to the superconducting gap, as already observed, confirming that phase coherence is not necessary. An excellent agreement is also found above the gap where the noise follows the normal case.Comment: 2 pages, revtex, 2 eps figures, to appear in Phys. Rev.

Super-resolution provided by the arbitrarily strong superlinearity of the blackbody radiation

Blackbody radiation is a fundamental phenomenon in nature, and its explanation by Planck marks a cornerstone in the history of Physics. In this theoretical work, we show that the spectral radiance given by Planck's law is strongly superlinear with temperature, with an arbitrarily large local exponent for decreasing wavelengths. From that scaling analysis, we propose a new concept of super-resolved detection and imaging: if a focused beam of energy is scanned over an object that absorbs and linearly converts that energy into heat, a highly nonlinear thermal radiation response is generated, and its point spread function can be made arbitrarily smaller than the excitation beam focus. Based on a few practical scenarios, we propose to extend the notion of super-resolution beyond its current niche in microscopy to various kinds of excitation beams, a wide range of spatial scales, and a broader diversity of target objects

Energy-resolved electron-spin dynamics at surfaces of p-doped GaAs

Electron-spin relaxation at different surfaces of p-doped GaAs is investigated by means of spin, time and energy resolved 2-photon photoemission. These results are contrasted with bulk results obtained by time-resolved Faraday rotation measurements as well as calculations of the Bir-Aronov-Pikus spin-flip mechanism. Due to the reduced hole density in the band bending region at the (100) surface the spin-relaxation time increases over two orders of magnitude towards lower energies. At the flat-band (011) surface a constant spin relaxation time in agreement with our measurements and calculations for bulk GaAs is obtained.Comment: 6 pages, 4 figure

Vocational perspectives after spinal cord injury

Objective: To give insight into the vocational situation several years after a traumatic spinal cord injury (SCI) and describe the personal experiences and unmet needs; to give an overview of health and functional status per type of SCI and their relationship with employment status. Design: Descriptive analysis of data from a questionnaire. Setting: Dutch rehabilitation centre with special department for patients with spinal cord injuries. Subjects: Fifty-seven patients with a traumatic SCI, aged 18-60 years, admitted to the rehabilitation centre from 1990 to 1998. Main measures: Questionnaire with items related to vocational outcome, job experiences, health and functional status. Results: Of 49 patients who were working at the moment of SCI 60% currently had a paid job. Vocational outcome was related to a higher educational level. A significant relation between the SCI-specific health and functional status and employment was not found. The respondents who changed to a new employer needed more time to resume work, but seemed more satisfied with the job and lost fewer working hours than those who resumed work with the same employer. In spite of reasonable to good satisfaction with the current work situation, several negative experiences and unmet needs were reported. Conclusions: Despite a high participation in paid work following SCI, the effort of the disabled worker to have and keep a job should not be underestimated

A study on using genetic niching for query optimisation in document retrieval

International audienceThis paper presents a new genetic approach for query optimisation in document retrieval. The main contribution of the paper is to show the effectiveness of the genetic niching technique to reach multiple relevant regions of the document space. Moreover, suitable merging procedures have been proposed in order to improve the retrieval evaluation. Experimental results obtained using a TREC sub-collection indicate that the proposed approach is promising for applications

Report on New Mission Concept Study: Stereo X-Ray Corona Imager Mission

Studies of the three-dimensional structure and dynamics of the solar corona have been severely limited by the constraint of single viewpoint observations. The Stereo X-Ray Coronal Imager (SXCI) mission will send a single instrument, an X-ray telescope, into deep space expressly to record stereoscopic images of the solar corona. The SXCI spacecraft will be inserted into a approximately 1 AU heliocentric orbit leading Earth by approximately 25 deg at the end of nine months. The SXCI X-ray telescope forms one element of a stereo pair, the second element being an identical X-ray telescope in Earth orbit placed there as part of the NOAA GOES program. X-ray emission is a powerful diagnostic of the corona and its magnetic fields, and three dimensional information on the coronal magnetic structure would be obtained by combining the data from the two X-ray telescopes. This information can be used to address the major solar physics questions of (1) what causes explosive coronal events such as coronal mass ejections (CMEs), eruptive flares and prominence eruptions and (2) what causes the transient heating of coronal loops. Stereoscopic views of the optically thin corona will resolve some ambiguities inherent in single line-of-sight observations. Triangulation gives 3D solar coordinates of features which can be seen in the simultaneous images from both telescopes. As part of this study, tools were developed for determining the 3D geometry of coronal features using triangulation. Advanced technologies for visualization and analysis of stereo images were tested. Results of mission and spacecraft studies are also reported

Protocol study: Sexual and reproductive health knowledge, information-seeking behaviour and attitudes among Saudi women: A questionnaire survey of university students

Copyright © 2014 Farih et al.; licensee BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.Background - Sexual and reproductive health (SRH), a basic right for women worldwide, is infrequently researched in countries in the Middle East and North Africa (MENA). No empirical studies of SRH among Saudi women exist. This protocol describes a study to explore the SRH knowledge, information-seeking behaviour and attitudes of Saudi female university students. Methods/Design - This study will administer a questionnaire survey to female students at 13 universities in Riyadh, Saudi Arabia. The questionnaire was developed following a literature search to identify relevant content, with psychometrically tested tools used when available. The content layout and the wording and order of the questions were designed to minimize the risk of bias. The questionnaire has been translated into Arabic and piloted in preparation for administration to the study sample. Ethical approval for the study has been granted (reference no. QMREC2012/54). After questionnaire administration, the data will be collated, analysed and reported anonymously. The findings will be published in compliance with reporting guidelines for survey research. Discussion - This study will be the first to provide fundamental information concerning Saudi females university students SRH knowledge and information needs.King Abdullah Scholarship Program, Saudi Arabi

Shaking table tests and numerical analyses on a scaled dry-joint arch undergoing windowed sine pulses

The damages occurred during recent seismic events have emphasised the vulnerability of vaulted masonry structures, one of the most representative elements of worldwide cultural heritage. Although a certain consensus has been reached regarding the static behaviour of masonry arches, still more efforts are requested to investigate their dynamic behaviour. In this regard, the present paper aims to investigate the performance of a scaled dry-joint arch undergoing windowed sine pulses. A feature tracking based measuring technique was employed to evaluate the displacement of selected points, shading light on the failure mechanisms and gathering data for the calibration of the numerical model. This was built according to a micro-modelling approach of the finite element method, with voussoirs assumed very stiff and friction interface elements. Comparisons with existing literature are also stressed, together with comments about scale effects.This work was partly financed by FEDER funds through the Competitivity Factors Operational Programme-COMPETE and by national funds through FCT-Foundation for Science and Technology within the scope of the Project POCI-01-0145-FEDER-007633.info:eu-repo/semantics/publishedVersio