2,753 research outputs found

    LATE FROST EVENTS IN AN ALPINE VALLEY: MEASUREMENTS AND CHARACTERISATION OF THE PROCESS

    Get PDF
    Under the research project GEPRI, aimed at investigating and characterizing late frost events potentiallydangerous for cultivated areas, in the spring of 2004 an intensive meteorological field experiment has been made in the Adige River Valley in Trentino (Northern Italy). The project is aimed at a better characterization of the mechanism of late frost events in complex topography in order to improve the forecast of the occurrence of nocturnal temperature minima. In this work some preliminary results of the micrometeorological measurements performed at a target area within an appletrees orchard are presented and discussed. Measurements allowed the determination of the complete energy balance, as well as the identification of specific local-scale circulations which appear to be relevant in characterizing the night-time cooling process. In case of fair weather conditions, the latter displays a sequence of at least four different phases which seem to alternate rather than superimpose advective- and radiative-effects

    Development of a measurement platformon a light airplane and analysis of airborne measurementsin the atmospheric boundary layer

    Get PDF
    In the present paper we provide an overview of a long term research project aimed at setting up a suitable platform for measurements in the atmospheric boundary layer on a light airplane along with some preliminary results obtained from fi eld campaigns at selected sites. Measurements of air pressure, temperature and relative humidity have been performed in various Alpine valleys up to a height of about 2500 m a.m.s.l. By means of GPS resources and specifi c post-processing procedures careful positioning of measurement points within the explored domain has been achieved. The analysis of collected data allowed detailed investigation of atmospheric vertical structures and dynamics typical of valley environment, such as morning transition from ground based inversion to fully developed well mixed convective boundary layer. Based on data collected along fl ights, 3D fi elds of the explored variables have been detected and identifi ed through application of geostatistical techniques (Kriging). The adopted procedures allowed evaluation of the intrinsic statistical structure of the spatial distribution of measured quantities and the estimate of the values of the same variable at unexplored locations by suitable weighted average of data recorded at close locations. Results thus obtained are presented and discussed

    The use of carboxymethylcellulose for the tartaric stabilization of white wines, in comparison with other oenological additives

    Get PDF
    The aim of this study was to test the effectiveness of two types of carboxymethylcellulose (CMC), at different doses, for the prevention of tartaric precipitations in two white wines (Pinot Blanc and Chardonnay), in comparison with metatartaric acid and a commercial arabic gum. After the addition of the additives to the wines, the mini-contact test was carried out and the saturation temperature was determined by Ridomi’s method. The determination of the saturation temperature was then repeated on the same trials kept at -4 °C for 10 days. Both kinds of CMC caused a significant decrease in tartaric precipitations induced by the addition of potassium bitartrate (KHT) (mini-contact test), by limiting the growth of the added KHT crystals. Their effectiveness increased with the dose, following a hyperbolic trend. The stabilizing effect of the two kinds of CMC, particularly CMC2 (more viscous), was similar to the one of metatartaric acid. Their use must be considered complementary to the cold treatment (chillproofing).

    A Non-equilibrium STM model for Kondo Resonance on surface

    Full text link
    Based on a no-equilibrium STM model, we study Kondo resonance on a surface by self-consistent calculations. The shapes of tunneling spectra are dependent on the energy range of tunneling electrons. Our results show that both energy-cutoff and energy-window of tunneling electrons have significant influence on the shapes of tunneling spectra. If no energy-cutoff is used, the Kondo resonances in tunneling spectrum are peaks with the same shapes in the density of state of absorbed magnetic atoms. This is just the prediction of Tersoff theory. If we use an energy cutoff to remove high-energy lectrons, a dip structure will modulate the Kondo resonance peak in the tunneling spectrum. The real shape of Kondo peak is the mixing of the peak and dip, the so-called Fano line shape. The method of self-consistent non-equilibrium matrix Green function is discussed in details.Comment: 11 pages and 8 eps figur

    Development of a measurement platformon a light airplane and analysis of airborne measurementsin the atmospheric boundary layer

    Get PDF
    In the present paper we provide an overview of a long term research project aimed at setting up a suitable platform for measurements in the atmospheric boundary layer on a light airplane along with some preliminary results obtained from fi eld campaigns at selected sites. Measurements of air pressure, temperature and relative humidity have been performed in various Alpine valleys up to a height of about 2500 m a.m.s.l. By means of GPS resources and specifi c post-processing procedures careful positioning of measurement points within the explored domain has been achieved. The analysis of collected data allowed detailed investigation of atmospheric vertical structures and dynamics typical of valley environment, such as morning transition from ground based inversion to fully developed well mixed convective boundary layer. Based on data collected along fl ights, 3D fi elds of the explored variables have been detected and identifi ed through application of geostatistical techniques (Kriging). The adopted procedures allowed evaluation of the intrinsic statistical structure of the spatial distribution of measured quantities and the estimate of the values of the same variable at unexplored locations by suitable weighted average of data recorded at close locations. Results thus obtained are presented and discussed

    A CMOS silicon spin qubit

    Full text link
    Silicon, the main constituent of microprocessor chips, is emerging as a promising material for the realization of future quantum processors. Leveraging its well-established complementary metal-oxide-semiconductor (CMOS) technology would be a clear asset to the development of scalable quantum computing architectures and to their co-integration with classical control hardware. Here we report a silicon quantum bit (qubit) device made with an industry-standard fabrication process. The device consists of a two-gate, p-type transistor with an undoped channel. At low temperature, the first gate defines a quantum dot (QD) encoding a hole spin qubit, the second one a QD used for the qubit readout. All electrical, two-axis control of the spin qubit is achieved by applying a phase-tunable microwave modulation to the first gate. Our result opens a viable path to qubit up-scaling through a readily exploitable CMOS platform.Comment: 12 pages, 4 figure

    Pauli spin blockade in CMOS double quantum dot devices

    Full text link
    Silicon quantum dots are attractive candidates for the development of scalable, spin-based qubits. Pauli spin blockade in double quantum dots provides an efficient, temperature independent mechanism for qubit readout. Here we report on transport experiments in double gate nanowire transistors issued from a CMOS process on 300 mm silicon-on-insulator wafers. At low temperature the devices behave as two few-electron quantum dots in series. We observe signatures of Pauli spin blockade with a singlet-triplet splitting ranging from 0.3 to 1.3 meV. Magneto-transport measurements show that transitions which conserve spin are shown to be magnetic-field independent up to B = 6 T.Comment: 5 pages , 4 figure

    Orbital Kondo effect in carbon nanotubes

    Full text link
    Progress in the fabrication of nanometer-scale electronic devices is opening new opportunities to uncover the deepest aspects of the Kondo effect, one of the paradigmatic phenomena in the physics of strongly correlated electrons. Artificial single-impurity Kondo systems have been realized in various nanostructures, including semiconductor quantum dots, carbon nanotubes and individual molecules. The Kondo effect is usually regarded as a spin-related phenomenon, namely the coherent exchange of the spin between a localized state and a Fermi sea of electrons. In principle, however, the role of the spin could be replaced by other degrees of freedom, such as an orbital quantum number. Here we demonstrate that the unique electronic structure of carbon nanotubes enables the observation of a purely orbital Kondo effect. We use a magnetic field to tune spin-polarized states into orbital degeneracy and conclude that the orbital quantum number is conserved during tunneling. When orbital and spin degeneracies are simultaneously present, we observe a strongly enhanced Kondo effect, with a multiple splitting of the Kondo resonance at finite field and predicted to obey a so-called SU(4) symmetry.Comment: 26 pages, including 4+2 figure

    EHA Research Roadmap on Hemoglobinopathies and Thalassemia: An Update

    Get PDF
    The inherited disorders of hemoglobin, which include sickle cell disease and thalassemias, are the most common and widespread distributed monogenic disorders. Due to a selective advantage in malaria regions, these hemoglobin defects are particularly frequent in Africa, Asia, or in the Mediterranean areas, where malaria was endemic until the last century. In recent decades, the globalization of migration has contributed to generate multiethnic European societies. Due to migration from countries or regions with high hemoglobinopathy frequencies such as Africa, Middle East, or Asia, large numbers of patients with these disorders are living in almost every European country today. Furthermore, the numbers are increasing because of increasing refugee flows toward Europe. Additional requirements are the development of European recommendations and guidelines for diagnosis and effective therapeutic approaches. These, together with the advancement of clinical trials using new drugs and therapeutic procedures could ameliorate the quality of life of patients affected with these diseases and increase their life expectancy. Lastly, coordinated efforts should be made to develop diagnostic pathways for thalassemias and hemoglobinopathies, in order to plan interventions, including prenatal diagnosis and cure. For these reasons, the development of new tools to reliably diagnose anemias is urgently needed and fits well with the needs of personalized medicine. In the last 15 years, hematology research has made many big leaps forward. Our general aim will be to solve several hematologic problems using these new approaches. We expect that the development of such a diagnostic tool will improve timely diagnosis throughout Europe, especially in those countries where it is difficult to gain access to "classical" diagnostic tests

    Singlet-triplet transition in a single-electron transistor at zero magnetic field

    Full text link
    We report sharp peaks in the differential conductance of a single-electron transistor (SET) at low temperature, for gate voltages at which charge fluctuations are suppressed. For odd numbers of electrons we observe the expected Kondo peak at zero bias. For even numbers of electrons we generally observe Kondo-like features corresponding to excited states. For the latter, the excitation energy often decreases with gate voltage until a new zero-bias Kondo peak results. We ascribe this behavior to a singlet-triplet transition in zero magnetic field driven by the change of shape of the potential that confines the electrons in the SET.Comment: 4 p., 4 fig., 5 new ref. Rewrote 1st paragr. on p. 4. Revised author list. More detailed fit results on page 3. A plotting error in the horizontal axis of Fig. 1b and 3 was corrected, and so were the numbers in the text read from those fig. Fig. 4 was modified with a better temperature calibration (changes are a few percent). The inset of this fig. was removed as it is unnecessary here. Added remarks in the conclusion. Typos are correcte
    corecore