69 research outputs found

    Oceanic Core Complex die off and generation of enhanced mantle upwelling on the Mid-Atlantic Ridge - 22° N

    Get PDF
    EGU2011-13199 Images of crustal construction provide a key to understand the interplay of magmatism and tectonism while oceanic crust is build up. Bathymetric data show that the crustal construction is highly variable. Areas that are dominated by magmatic processes are adjacent to areas that are highly tectonised and where mantle rocks were found. The Mid-Atlantic Ridge at 22°N shows this high variability along the ridge axis, within the TAMMAR segment, and from segment to segment. However, this strong variability occurs also off-axis, spreading parallel, representing different times in the same area of the ridge. A fracture zone, with limited magma supply, has been replaced by a segment centre with a high magmatic budget. Roughly 4.5 million years ago, the growing magmatic active TAMMAR segment, propagated into the fracture zone, started the migration of the ridge offset to the south, and stopped the formation of core complexes. We present data from seismic refraction and wide-angle reflection profiles that surveyed the crustal structure across the ridge crest of the TAMMAR segment. These yield the crustal structure at the segment centre as a function of melt supply. The results suggest that crust is ~8 km thick near the ridge and decreases in thickness with offset to the ridge axis. Seismic layer 3 shows profound changes in thickness and becomes rapidly one kilometre thicker approx. 5 million years ago. This correlates with gravimetric data and the observed “Bull’s eye” anomaly in that region. Our observations support a temporal change from thick lithosphere with oceanic core complex formation to thin lithosphere with focussed mantle upwelling and segment growing. The formation of ‘thick-crust’ volcanic centre seems to have coincided with the onset of propagation 4.5 million years ago

    Crustal structure from teleseismic P-wave receiver function analysis in the Maule Region, Central Chile

    Get PDF
    EGU2011-12780 A temporary passive seismic network of 31 broad-band stations was deployed in the region around Talca and Constitución between 35°S to 36°S latitude and 71°W to 72.5°W longitude. The network was operated between March and October 2008. Thus, we recorded data prior the magnitude Mw=8.8 earthquake of 27 February 2010 at a latitude of the major slip and surface uplift. The experiment was conducted to address fundamental questions on deformation processes, crustal and mantle structures, and fluid flow. We present results of a teleseismic P receiver function study that covers the coastal region and reaches to the Andes. The aim is to determine the structure and thickness of the continental crust and constrain the state of hydration of the mantle wedge. The P-wave receiver function technique requires large teleseismic earthquakes from different distances and backazimuths. A few percent of the incident P-wave energy from a teleseismic event will be converted into S-wave (Ps) at significant and relatively sharp discontinuities beneath the station. A small converted S phase is produced that arrives at the station within the P wave coda directly after the direct P-wave. The converted Ps phase and their crustal multiples contain information about crustal properties, such as Moho depth and the crustal vp/vs ratio. We use teleseismic events with magnitudes mb > 5.5 at epicentral distances between 30° and 95° to examine P-to-S converted seismic phases. Our preliminary results provide new information about the thickness of the continental crust beneath the coastal region in Central Chile. At most of the stations we observed significant energy from P to S converted waves between 4 and 5 s after the direct P-wave within a positive phase interpreted as the Moho, occurring at 35 to 40 km. The great Maule earthquake of 27 February 2010 nucleated up-dip of the continental Moho. The rupture of this earthquake seems to have propagated down-dip of the Moho. The Moho reflection show a positive polarity, indicating that the mantle is either dry or only moderately hydrated. We observed converted energy from an intracrustal boundary at around 2 s that disappears near the coast. Further, positive polarity peaks occur that are possibly caused by the down going plate

    Does gravity modelling justify a rifted "Ligurian Basin"?

    Get PDF
    The geo-historical development of the Ligurian Basin and the structure of the crust and upper mantle in this area are still being discussed. Yet it remains unclear if rifting caused continental break-up and seafloor spreading and one of the key questions is whether rifting can be identified in geophysical measurements. For our investigations we had the following updated data sets at our disposal: the new gravity maps of the AlpArray Gravity Working Group (complete Bouguer - CBA, Free air, and isostatic anomalies) the seismic results of the Lobster campaigns of our GEOMAR partners in the SPP MB4D as well as the dynamic modelling results from our own subproject. The constraining data are supplemented with seismic profile data from French and Italian offshore campaigns, as far as they are usable in publications for us. The GFZ modelling software IGMAS+ was used for an interactive 3D modelling. The resulting model contains density inhomogeneities in the crust as well as in the upper mantle down to a depth of 300 km following the results of dynamic models of our own subproject. Due to the special hybrid modelling of the crust (by polygonal structures) and the upper mantle (by voxels of recent velocity models), the individual contributions to the gravity field are clearly separable. As a further special feature, we point out that the density model used is based on the gravity modelling from the first phase of the SPP MB4D (our former subproject INTEGRATE). Thus, a largely consistent 3D density model for both the Alps and the Ligurian Sea is available for interpretation. The constrained 3D modelling of the gravity field, as well as numerical analyses of the fields (terracing, clustering, filtering, curvature), calculations of the vertical stress and Gravity Potential Energy (GPE) suggest that a rift structure in the area of the Ligurian Sea can be identified and mapped. The interactive modelling is supported by the use of geological maps in the Ligurian Sea area. By overlaying the model gravity maps and the geological maps, the good agreement becomes visible – refer to the attached figure

    Investigations of the Oligocene-Miocene opening of the Ligurian Basin using amphibious refraction seismic data

    Get PDF
    The Ligurian Basin is located north-west of Corsica at the transition from the western Alpine orogen to the Apennine system. The Back-arc basin was generated by the southeast trench retreat of the Apennines-Calabrian-Maghrebides subduction zone. The opening took place from late Oligocene to Miocene. While the extension led to extreme continental thinning and un-roofing of mantle material little is known about the style of back-arc rifting. To shed light on the present day crustal and lithospheric architecture of the Ligurian Basin, active seismic data have been recorded on short period ocean bottom seismometers in the framework of SPP2017 4D-MB, the German component of AlpArray. Two refraction seismic profiles were shot across and along the centre of the Ligurian Basin. P01 was shot in an E-W direction from the Gulf of Lion to Corsica. The profile extends onshore Corsica to image the necking zone of continental thinning. P02 is a transect along the basin in NE-SW direction extending a previous shot seismic profile reaching to the Italian cost near Genua. The majority of the ocean bottom seismometer data show sedimentary and crustal phases of good quality and weaker in amplitude mantle phases to offsets up to 70 km. The arrivals of seismic phases were picked and inverted in a travel time tomography. The results for p01 show a crust-mantle boundary in the central basin at ~12 km depth below sea surface. The crust-mantle boundary deepens from ~12 km to ~18 km within 25 - 30 km towards Corsica. The results do not map an axial valley as expected for oceanic spreading. However, an extremely thinned continental crust indicates a long-lasting rifting process that possibly did not initiate oceanic spreading before the opening of the Ligurian Basin stopped. This is in good agreement with recent kinematic modelling performed in the second phase of the SPP2017 4D-MB. The modelling results of p01 indicate that continental crust can be stretched over several million years when the opening rate is low, i.e. <2 mm/year, and syn-rift sedimentation rate is high. Subduction initiation could occur in ultra-thinned continental crust as basin inversion has been observed at the northern Ligurian margin as a result of the African-European convergence. Additionally, the observations from the Ligurian Basin might be transferred to the evolution of the Piemont-Liguro Ocean. So far oceanic crust was assumed as initial conditions for the subduction of the Piemont-Liguro Ocean. An ultra-thin continental crust as initial condition would explain the observed thin subducted Piemont-Liguro plate which seemed to be thinner than 6-7 km oceanic crust. Further, a dry continental crust could explain why no back-arc volcanism was observed. The along-basin profile p02 shows a deepening crust-mantle boundary from 11 to 13 km. Based on the retrieved velocity model, gravity modelling and further results from surrounding studies we conclude that the continental crust is thinning from the northeast to the southwest which is related to the increase of extension away from the rotation pole of the anticlockwise rotation of the Corsica-Sardinia block. It remains unclear if at the southern end of the profile the mantle is overlain directly by sediments or by extremely thinned continental crust of up to 2.5 km thickness. The results however document, that seafloor spreading and the formation of mantle-derived oceanic crust was not initiated during the extension of the Ligurian Basin

    Agricultural land use changes – a scenario-based sustainability impact assessment for Brandenburg, Germany

    Get PDF
    AbstractDecisions for agricultural management are taken at farm scale. However, such decisions may well impact upon regional sustainability. Two of the likely agricultural management responses to future challenges are extended use of irrigation and increased production of energy crops. The drivers for these are high commodity prices and subsidy policies for renewable energy. However, the impacts of these responses upon regional sustainability are unknown. Thus, we conducted integrated impact assessments for agricultural intensification scenarios in the federal state of Brandenburg, Germany, for 2025. One Irrigation scenario and one Energy scenario were contrasted with the Business As Usual (BAU) scenario. We applied nine indicators to analyze the economic, social and environmental effects at the regional, in this case district scale, which is the smallest administrative unit in Brandenburg. Assessment results were discussed in a stakeholder workshop involving 16 experts from the state government.The simulated area shares of silage maize for fodder and energy were 29%, 37% and 49% for the BAU, Irrigation, and Energy scenarios, respectively. The Energy scenario increased bio-electricity production to 41% of the demand of Brandenburg, and it resulted in CO2 savings of up to 3.5milliontons. However, it resulted in loss of biodiversity, loss of landscape scenery, increased soil erosion risk, and increased area demand for water protection requirements. The Irrigation scenario led to yield increases of 7% (rapeseed), 18% (wheat, sugar beet), and 40% (maize) compared to the BAU scenario. It also reduced the year-to-year yield variability. Water demand for irrigation was found to be in conflict with other water uses for two of the 14 districts. Spatial differentiation of scenario impacts showed that districts with medium to low yield potentials were more affected by negative impacts than districts with high yield potentials.In this first comprehensive sustainability impact assessment of agricultural intensification scenarios at regional level, we showed that a considerable potential for agricultural intensification exists. The intensification is accompanied by adverse environmental and socio-economic impacts. The novelty lies in the multiscale integration of comprehensive, agricultural management simulations with regional level impact assessment, which was achieved with the adequate use of indicators. It provided relevant evidence for policy decision making. Stakeholders appreciated the integrative approach of the assessment, which substantiated ongoing discussions among the government bodies. The assessment approach and the Brandenburg case study may stay exemplary for other regions in the world where similar economic and policy driving forces are likely to lead to agricultural intensification

    Crustal structure of the propagating TAMMAR ridge segment on the Mid-Atlantic Ridge, 21.5°N

    Get PDF
    Active ridge propagation frequently occurs along spreading ridges and profoundly affects ridge crest segmentation over time. The mechanisms controlling ridge propagation, however, are poorly understood. At the slow spreading Mid-Atlantic Ridge at 21.5°N a seismic refraction and wide-angle reflection profile surveyed the crustal structure along a segment controlled by rapid ridge propagation. Tomographic traveltime inversion of seismic data suggests that the crustal structure along the ridge axis is controlled by melt supply; thus, crust is thickest, 8 km, at the domed segment center and decreases in thickness toward both segment ends. However, thicker crust is formed in the direction of ridge propagation, suggesting that melt is preferentially transferred toward the propagating ridge tip. Further, while seismic layer 2 remains constant along axis, seismic layer 3 shows profound changes in thickness, governing variations in total crustal thickness. This feature supports mantle upwelling at the segment center. Thus, fluid basaltic melt is redistributed easily laterally, while more viscose gabbroic melt tends to crystallize and accrete nearer to the locus of melt supply. The onset of propagation seems to have coincided with the formation of thicker crust, suggesting that propagation initiation might be due to changes in the melt supply. After a rapid initiation a continuous process of propagation was established. The propagation rate seems to be controlled by the amount of magma that reaches the segment ends. The strength of upwelling may govern the evolution of ridge segments and hence ultimately controls the propagation length

    Detecting dominant changes in irregularly sampled multivariate water quality data sets

    Get PDF
    Time series of groundwater and stream water quality often exhibit substantial temporal and spatial variability, whereas typical existing monitoring data sets, e.g. from environmental agencies, are usually characterized by relatively low sampling frequency and irregular sampling in space and/or time. This complicates the differentiation between anthropogenic influence and natural variability as well as the detection of changes in water quality which indicate changes in single drivers. We suggest the new term dominant changes for changes in multivariate water quality data which concern (1) multiple variables, (2) multiple sites and (3) long-term patterns and present an exploratory framework for the detection of such dominant changes in data sets with irregular sampling in space and time. Firstly, a non-linear dimension-reduction technique was used to summarize the dominant spatiotemporal dynamics in the multivariate water quality data set in a few components. Those were used to derive hypotheses on the dominant drivers influencing water quality. Secondly, different sampling sites were compared with respect to median component values. Thirdly, time series of the components at single sites were analysed for long-term patterns. We tested the approach with a joint stream water and groundwater data set quality consisting of 1572 samples, each comprising sixteen variables, sampled with a spatially and temporally irregular sampling scheme at 29 sites in northeast Germany from 1998 to 2009. The first four components were interpreted as (1) an agriculturally induced enhancement of the natural background level of solute concentration, (2) a redox sequence from reducing conditions in deep groundwater to post-oxic conditions in shallow groundwater and oxic conditions in stream water, (3) a mixing ratio of deep and shallow groundwater to the streamflow and (4) sporadic events of slurry application in the agricultural practice. Dominant changes were observed for the first two components. The changing intensity of the first component was interpreted as response to the temporal variability of the thickness of the unsaturated zone. A steady increase in the second component at most stream water sites pointed towards progressing depletion of the denitrification capacity of the deep aquifer.</p

    ADRIA LITHOSPHERE INVESTIGATION ALPHA - Cruise No. M86/3, January 20 - February 04, 2012, Brindisi (Italy) - Dubrovnik (Croatia)

    Get PDF
    The Adriatic Sea and underlying lithosphere remains the least investigated part of the Mediterranean Sea. To shed light on the plate tectonic setting in this central part of southern Europe, R/V METEOR cruise M86/3 set out to acquire deep penetrating seismic data in the Adriatic Sea. M86/3 formed the core of an amphibious investigation crossing Adria from the Italian Peninsula into Montenegro/Albania. A total of 111 OBS/OBH deployments were successfully carried out, in addition to 47 landstations both in Italy and Montenegro/Albania, which recorded the offshore airgun shots. In the scope of this shoreline-crossing study, the aim is to quantify the shallow geometry, deep boundaries and the architecture of the southern Adriatic crust and lithosphere and to provide insights on a possible decoupling zone between the northern and southern Adriatic domains. Investigating the structure of the Adriatic crust and lithospheric mantle and analyzing the tectonic activity are essential for understanding the mountain-building processes that underlie the neotectonics and earthquake hazard of the Periadriatic region, especially in the vicinity of local decoupling zones
    • 

    corecore