Design Strategy for Nanostructured Arrays of Metallodielectric Cuboids to Systematically Tune the Optical Response and Eliminate Spurious Bulk Effects in Plasmonic Biosensors

Plasmonic biosensors are a powerful tool for studying molecule adsorption label-free and with high sensitivity. Here, we present a systematic study on the optical properties of strictly regular nanostructures composed of metallodielectric cuboids with the aim to deliberately tune their optical response and improve their biosensing performance. In addition, the patterns were tested for their potential to eliminate spurious effects from sensor response, caused by refractive index changes in the bulk solution. Shifts in the plasmonic spectrum are exclusively caused by the adsorbing molecules. For this purpose, nanopatterns of interconnected and separated cubes with dimensions ranging from 150 to 600 nm have been fabricated from poly(methyl methacrylate) using electron-beam lithography followed by metallization with gold. It is shown that a small lateral pattern size, a high aspect ratio, and short connection lengths are favorable to generate extinction spectra with well-separated and pronounced peaks. Furthermore, for selected nanostructures, we have been able to identify reflection angles for which the influence of the bulk refractive index on the position of the plasmonic peaks is negligible. It is shown that sensor operation under these angles enables monitoring of in situ biomolecule adsorption with high sensitivity providing a promising tool for high-throughput applications

Polymer-induced swelling of solid-supported lipid membranes

In this paper, we study the interaction of charged polymers with solid-supported 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) membranes by in-situ neutron reflectivity. We observe an enormous swelling of the oligolamellar lipid bilayer stacks after incubation in solutions of poly(allylamine hydrochloride) (PAH) in DO. The positively charged polyelectrolyte molecules interact with the lipid bilayers and induce a drastic increase in their d-spacing by a factor of ~4. Temperature, time, and pH influence the swollen interfacial lipid linings. From our study, we conclude that electrostatic interactions introduced by the adsorbed PAH are the main cause for the drastic swelling of the lipid coatings. The DMPC membrane stacks do not detach from their solid support at T > T. Steric interactions, also introduced by the PAH molecules, are held responsible for the stabilizing effect. We believe that this novel system offers great potential for fundamental studies of biomembrane properties, keeping the membrane's natural fluidity and freedom, decoupled from a solid support at physiological conditions

Poly-acrylic Acid Brushes and Adsorbed Proteins

Planar polyelectrolyte brushes are prepared by Langmuir-Schaefer based grafting of perdeuterated (styrene)49-b-(acrylic acid)222 block copolymer (dPS-b-PAA) to dPS pre-coated silicon supports with grafting density σPAA from 0.07 to 0.11 nm-2. The structure of the solvent-swollen brushes, i. e. the volume fraction profile of polymer segments, ϕPAA, as a function of altitude z from the grafting plane into the liquid phase is extracted from neutron reflectivity measurements. We find that for all cases investigated ϕPAA(z) resembles a Gaussian profile. Although very condensed, the PAA brushes can be loaded with bovine serum albumin (BSA). The integral amount of adsorbed BSA scales linearly with grafting density. We compare our z-resolved volume fraction profile ϕBSA(z) of BSA on PAA brushes with existing literature on that system. It is found that a cross-over takes place in the adsorption scheme from ternary compressive, where proteins can approach the grafting surface only by compressing the brush, to ternary insertive, where proteins enter the brush with only local perturbation of the concentration profile, as a function of RP/Hmax, where RP is the Stokes-Radius of the protein, and Hmax is the experimentally determined maximum height of the brush

Polymer-induced swelling of solid-supported lipid membranes

In this paper, we study the interaction of charged polymers with solid-supported 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) membranes by in-situ neutron reflectivity. We observe an enormous swelling of the oligolamellar lipid bilayer stacks after incubation in solutions of poly(allylamine hydrochloride) (PAH) in DO. The positively charged polyelectrolyte molecules interact with the lipid bilayers and induce a drastic increase in their d-spacing by a factor of ~4. Temperature, time, and pH influence the swollen interfacial lipid linings. From our study, we conclude that electrostatic interactions introduced by the adsorbed PAH are the main cause for the drastic swelling of the lipid coatings. The DMPC membrane stacks do not detach from their solid support at T > T. Steric interactions, also introduced by the PAH molecules, are held responsible for the stabilizing effect. We believe that this novel system offers great potential for fundamental studies of biomembrane properties, keeping the membrane's natural fluidity and freedom, decoupled from a solid support at physiological conditions

Poly(acrylic acid)–Poly(ethylene glycol) Layers on Positively Charged Surface Coatings: Molecular Structure, Protein Resistance, and Application to Single Protein Deposition

A new copolymer (PAA-PEG2000) has been designed, consisting of a negatively charged poly­(acrylic acid) (PAA) backbone to which poly­(ethylene glycol) (PEG) side chains with a molecular weight of about 2 kDa were grafted in a molecular ratio of 3:10. It readily adsorbs to positively charged surfaces and may be considered to be the anionic counterpart of PEG-grafted poly­(l-lysine) (PLL-PEG), which was first described by Kenausis et al. and is widely used to render negatively charged surfaces protein-resistant. The synthesis of PAA-PEG2000 can be carried out in aqueous solution at room temperature and does not require any sophisticated techniques such as handling in an inert gas atmosphere. Using ellipsometry and infrared reflection absorption spectroscopy (IRRAS), the film structure has been carefully analyzed for copolymer adsorption onto three different positively charged surfaces, namely, thin layers of poly­(allylamine) (PAH), poly­(ethyleneimine) (PEI) and (3-aminopropyl)­triethoxysilane (APTES). Besides the film thickness, the conformation of the PEG chains and their orientation with respect to the surface normal appear to be important parameters for the protein resistance of the films. Although PAA-PEG2000 adsorbed to PAH and PEI renders the surfaces inert, only partial protein resistance has been observed if the copolymer is deposited on APTES. In a model application, we have generated heterogeneous surfaces composed of isolated small Au nanoparticles (AuNP's) embedded in a protein-resistant layer of PAA-PEG2000 and demonstrated that the AuNP's can serve as adsorption sites for single protein species. In the future, these nanopatterned surfaces may be used for the investigation of isolated proteins

A mobile setup for simultaneous and in situ neutron reflectivity, infrared spectroscopy, and ellipsometry studies

Neutron reflectivity at the solid/liquid interface offers unique opportunities for resolving the structure–function relationships of interfacial layers in soft matter science. It is a non-destructive technique for detailed analysis of layered structures on molecular length scales, providing thickness, density, roughness, and composition of individual layers or components of adsorbed films. However, there are also some well-known limitations of this method, such as the lack of chemical information, the difficulties in determining large layer thicknesses, and the limited time resolution. We have addressed these shortcomings by designing and implementing a portable sample environment for in situ characterization at neutron reflectometry beamlines, integrating infrared spectroscopy under attenuated total reflection for determination of molecular entities and their conformation, and spectroscopic ellipsometry for rapid and independent measurement of layer thicknesses and refractive indices. The utility of this combined setup is demonstrated by two projects investigating (a) pH-dependent swelling of polyelectrolyte layers and (b) the impact of nanoparticles on lipid membranes to identify potential mechanisms of nanotoxicity. Funding agencies: This project was funded by a Röntgen-Ångström grant (Vetenskapsrådet Grant No. VR 2017-06696, and BMBF Grant No. 05K18VHA). T.E. and B.N. also acknowledge support by the Swedish Research Council (Vetenskapsrådet) under Grant No. 2014‐4004.</p

Location of Polyelectrolytes in Swollen Lipid Oligobilayers

Osteoarthritis is caused by degeneration of the cartilage, which covers the bone ends of the joints and is decorated with an oligolamellar phospholipid (PL) bilayer. The gap between the bone ends is filled with synovial fluid mainly containing hyaluronic acid (HA). HA and PLs are supposed to reduce friction and protect the cartilage from wear in joint movement. However, a detailed understanding of the molecular mechanisms of joint lubrication is still missing. Previously, we found that aqueous solutions of HA and poly(allylamine hydrochloride) (PAH), the latter serving as a polymeric analogue to HA, adsorb onto the headgroups of surface-bound 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) oligobilayers and significantly enhance their stability with respect to shear forces, typically occurring in joint movement. We now investigated the precise location of PAH chains across the lipid films in neutron reflectivity measurements, as bridging of the oligobilayers by polyelectrolytes (PEs) might be the cause for their improved mechanical stability. In a first set of experiments, we used hydrogenated PAH and chain-deuterated DMPC (DMPC-d54) to improve the contrast between the lipids and potentially intruding PAH. However, due to difficulties in distinguishing between incorporation of water and PAH, penetration into the lipid chain region could hardly be proven quantitatively. Therefore, we designed a more elaborate experiment based on mixed films of DMPC-d54 and hydrogenated DMPC, which is insensitive to water penetration into the films. Beside facilitating a detailed structural characterization of the oligolamellar system, this elaborate approach showed that PAH adsorbs to the DMPC heads and penetrates the lipid tail strata. No PAH was found in the lipid head strata, which excludes bridging of several lipid bilayers by the PE chains. The data are consistent with the assumption that PAH bridges are formed between the headgroups of two adjacent bilayers and contribute to the enhanced mechanical stability