Potential barrier heights at metal on oxygen-terminated diamond interfaces

International audienceElectrical properties of metal-semiconductor (M/SC) and metal/oxide/SC structures built with Zr or ZrO_2 deposited on oxygen-terminated surfaces of (001)-oriented diamond films, comprising a stack of lightly p-doped diamond on a heavily doped layer itself homoepitaxially grown on a Ib substrate, are investigated experimentally and compared to different models. In Schottky barrier diodes, the interfacial oxide layer evidenced by high resolution transmission electron microscopy and electron energy losses spectroscopy before and after annealing, and barrier height inhomogeneities accounts for the measured electrical characteristics until flat bands are reached, in accordance with a model which generalizes that of R.T. Tung [Phys. Rev. B 45, 13509 (1992)] and permits to extract physically meaningful parameters of the three kinds of interface: (a) unannealed ones; (b) annealed at 350°C; (c) annealed at 450°C, with characteristic barrier heights of 2.2-2.5 V in case (a) while as low as 0.96 V in case (c). Possible models of potential barriers for several metals deposited on well defined oxygen-terminated diamond surfaces are discussed and compared to experimental data. It is concluded that interface dipoles of several kinds present at these compound interfaces and their chemical evolution due to annealing are the suitable ingredients able to account for the Mott-Schottky behavior when the effect of the metal work function is ignored, and to justify the reverted slope observed regarding metal work function, in contrast to the trend always reported for all other metal-semiconductor interfaces.Les propriétés électriques et structurales d'interfaces métal/diamant et métal/oxyde/diamant où le métal est le Zirconium et le semi-conducteur comporte un empilement de couches faiblement et fortement dopées au bore sur substrat Ib, sont étudiées expérimentalement et comparées à différents modèles. Dans le barrière de Schottky, une inter-couche d'oxyde d'environ 2 couches atomiques, mise en évidence par diverses techniques de microscopie électronique à transmission, est présente et ajoutée à la présence d'inhomogénéités de barrière de potentiel, est corrélée aux propriétés électriques simulées par un modèle qui généralise celui de R. T. Tung [Phys. Rev. B 45, 13509 (1992)] . Les paramètres physiquement caractéristiques des interfaces (a) non recuites, (b) recuite à 350°C et (c) recuite à 450°C peuvent ainsi être extraits, en particulier des hauteurs de barrière de 2.2-2.5 V dans le cas (a) et aussi basses que 0.96 V dans le cas (c). Les modèles possibles de fixation du niveau de Fermi aux interfaces métal/diamant sont examinés et confrontés aux données récemment publiées pour différents métaux sur la surface oxygénée du diamant. On conclue que les quantités physiques judicieuses sont l'affinité électronique du diamant, fonction de son état de surface, pour justifier l'allure générale conforme au modèle de Mott-Schottky et la force du dipole d'interface, dépendante des liaisons chimiques à l'interface, pour expliquer la pente de la variation de la barrière en fonction du travail de sortie du métal, qui est inversée par rapport à tous les autres semi-conducteurs

Hydrogen passivation of boron acceptors in as-grown boron-doped CVD diamond epilayers

A homoepitaxial boron-doped diamond single layer is investigated by means of Fourier transformed infrared spectroscopy (FTIR) and cathodoluminescence (CL). Both techniques are shown to be complementary. μ-FTIR mapping allows to determine the location of active boron while CL allows discernability between passivation and compensation. Hydrogen incorporation during chemical vapour deposition (CVD) growth is revealed to passivate boron acceptors. The obtained results highlight that plasma etching can induce a dissociation of B–H centres.4 page

Beyond body maps: Information content of specific body parts is distributed across the somatosensory homunculus

The homunculus in primary somatosensory cortex (S1) is famous for its body part selectivity, but this dominant feature may eclipse other representational features, e.g., information content, also relevant for S1 organization. Using multivariate fMRI analysis, we ask whether body part information content can be identified in S1 beyond its primary region. Throughout S1, we identify significant representational dissimilarities between body parts but also subparts in distant non-primary regions (e.g., between the hand and the lips in the foot region and between different face parts in the foot region). Two movements performed by one body part (e.g., the hand) could also be dissociated well beyond its primary region (e.g., in the foot and face regions), even within Brodmann area 3b. Our results demonstrate that information content is more distributed across S1 than selectivity maps suggest. This finding reveals underlying information contents in S1 that could be harnessed for rehabilitation and brain-machine interfaces

Reassessing referral of touch following peripheral deafferentation:The role of contextual bias

Some amputees have been famously reported to perceive facial touch as arising from their phantom hand. These referred sensations have since been replicated across multiple neurological disorders and were classically interpreted as a perceptual correlate of cortical plasticity. Common to all these and related studies is that participants might have been influenced in their self-reports by the experimental design or related contextual biases. Here, we investigated whether referred sensations reports might be confounded by demand characteristics (e.g., compliance, expectation, suggestion). Unilateral upper-limb amputees (N = 18), congenital one-handers (N = 19), and two-handers (N = 22) were repeatedly stimulated with computer-controlled vibrations on 10 body-parts and asked to report the occurrence of any concurrent sensations on their hand(s). To further manipulate expectations, we gave participants the suggestion that some of these vibrations had a higher probability to evoke referred sensations. We also assessed similarity between (phantom) hand and face representation in primary somatosensory cortex (S1), using functional Magnetic Resonance Imaging (fMRI) multivariate representational similarity analysis. We replicated robust reports of referred sensations in amputees towards their phantom hand; however, the frequency and distribution of reported referred sensations were similar across groups. Moreover, referred sensations were evoked by stimulation of multiple body-parts and similarly reported on both the intact and phantom hand in amputees. Face-to-phantom-hand representational similarity was not different in amputees' missing hand region, compared with controls. These findings weaken the interpretation of referred sensations as a perceptual correlate of S1 plasticity and reveal the need to account for contextual biases when evaluating anomalous perceptual phenomena

A neural surveyor to map touch on the body

Perhaps the most recognizable sensory map in all of neuroscience is the somatosensory homunculus. Although it seems straightforward, this simple representation belies the complex link between an activation in a somatotopic map and the associated touch location on the body. Any isolated activation is spatially ambiguous without a neural decoder that can read its position within the entire map, but how this is computed by neural networks is unknown. We propose that the somatosensory system implements multilateration, a common computation used by surveying and global positioning systems to localize objects. Specifically, to decode touch location on the body, multilateration estimates the relative distance between the afferent input and the boundaries of a body part (e.g., the joints of a limb). We show that a simple feedforward neural network, which captures several fundamental receptive field properties of cortical somatosensory neurons, can implement a Bayes-optimal multilateral computation. Simulations demonstrated that this decoder produced a pattern of localization variability between two boundaries that was unique to multilateration. Finally, we identify this computational signature of multilateration in actual psychophysical experiments, suggesting that it is a candidate computational mechanism underlying tactile localization

Principles of environmentally-sustainable anaesthesia: a global consensus statement from the World Federation of Societies of Anaesthesiologists

The Earth’s mean surface temperature is already approximately 1.1°C higher than pre-industrial levels. Exceeding a mean 1.5°C rise by 2050 will make global adaptation to the consequences of climate change less possible. To protect public health, anaesthesia providers need to reduce the contribution their practice makes to global warming. We convened a Working Group of 45 anaesthesia providers with a recognised interest in sustainability, and used a three-stage modified Delphi consensus process to agree on principles of environmentally sustainable anaesthesia that are achievable worldwide. The Working Group agreed on the following three important underlying statements: patient safety should not be compromised by sustainable anaesthetic practices; high-, middle- and low-income countries should support each other appropriately in delivering sustainable healthcare (including anaesthesia); and healthcare systems should be mandated to reduce their contribution to global warming. We set out seven fundamental principles to guide anaesthesia providers in the move to environmentally sustainable practice, including: choice of medications and equipment; minimising waste and overuse of resources; and addressing environmental sustainability in anaesthetists’ education, research, quality improvement and local healthcare leadership activities. These changes are achievable with minimal material resource and financial investment, and should undergo re-evaluation and updates as better evidence is published. This paper discusses each principle individually, and directs readers towards further important references

Clinical and molecular practice of European thoracic pathology laboratories during the COVID-19 pandemic. The past and the near future

BACKGROUND: This study evaluated the consequences in Europe of the COVID-19 outbreak on pathology laboratories orientated toward the diagnosis of thoracic diseases. MATERIALS AND METHODS: A survey was sent to 71 pathology laboratories from 21 European countries. The questionnaire requested information concerning the organization of biosafety, the clinical and molecular pathology, the biobanking, the workload, the associated research into COVID-19, and the organization of education and training during the COVID-19 crisis, from 15 March to 31 May 2020, compared with the same period in 2019. RESULTS: Questionnaires were returned from 53/71 (75%) laboratories from 18 European countries. The biosafety procedures were heterogeneous. The workload in clinical and molecular pathology decreased dramatically by 31% (range, 3%-55%) and 26% (range, 7%-62%), respectively. According to the professional category, between 28% and 41% of the staff members were not present in the laboratories but did teleworking. A total of 70% of the laboratories developed virtual meetings for the training of residents and junior pathologists. During the period of study, none of the staff members with confirmed COVID-19 became infected as a result of handling samples. CONCLUSIONS: The COVID-19 pandemic has had a strong impact on most of the European pathology laboratories included in this study. Urgent implementation of several changes to the organization of most of these laboratories, notably to better harmonize biosafety procedures, was noted at the onset of the pandemic and maintained in the event of a new wave of infection occurring in Europe

Clinical and molecular practice of European thoracic pathology laboratories during the COVID-19 pandemic. The past and the near future.

This study evaluated the consequences in Europe of the COVID-19 outbreak on pathology laboratories orientated toward the diagnosis of thoracic diseases. A survey was sent to 71 pathology laboratories from 21 European countries. The questionnaire requested information concerning the organization of biosafety, the clinical and molecular pathology, the biobanking, the workload, the associated research into COVID-19, and the organization of education and training during the COVID-19 crisis, from 15 March to 31 May 2020, compared with the same period in 2019. Questionnaires were returned from 53/71 (75%) laboratories from 18 European countries. The biosafety procedures were heterogeneous. The workload in clinical and molecular pathology decreased dramatically by 31% (range, 3%-55%) and 26% (range, 7%-62%), respectively. According to the professional category, between 28% and 41% of the staff members were not present in the laboratories but did teleworking. A total of 70% of the laboratories developed virtual meetings for the training of residents and junior pathologists. During the period of study, none of the staff members with confirmed COVID-19 became infected as a result of handling samples. The COVID-19 pandemic has had a strong impact on most of the European pathology laboratories included in this study. Urgent implementation of several changes to the organization of most of these laboratories, notably to better harmonize biosafety procedures, was noted at the onset of the pandemic and maintained in the event of a new wave of infection occurring in Europe