Numerical analysis of thermal cycling during a multi-stage energy pile thermal response test

Energy piles are emerging as convenient alternative to the more traditional borehole heat exchangers (BHEs) to provide heating/cooling to buildings, as they remove the need for special purpose excavations and can accommodate more pipes, thus enhancing energy performance. However, their different aspect ratio compared to BHEs requires different modelling tools and dedicated thermal response testing, to achieve adequate thermal design. In this work, the results of an extended multi-stage thermal response test (TRT) carried out on a single energy pile installed in London Clay are presented in terms of both fluid temperature data and concrete temperature, measured by vibrating wire strain gauges and optic fibre sensors. The results are then explored in detail by means of a finite element numerical code, able to account for both convective heat exchange in the fluid, between the fluid and the solids and transient heat diffusion in the concrete and the ground. Analysis of the TRT field data shows that during the later stages of the test there is clear evidence of cyclic changes in performance. Investigation of these effects using the numerical model raises the possibility that there could be some alteration of the properties of the soil-pile contact during the test. Hypotheses for the observed behaviour are tentatively put forward and discussed with work recommended to further investigate the percieved phenomena

Comparison of two different models for pile thermal response test interpretation

Thermal response tests (TRTs) are regularly used to characterise the thermal resistance of borehole heat exchangers and to assess the thermal conductivity of the surrounding ground. It is becoming common to apply the same in situ testing technique to pile heat exchangers, despite international guidance suggesting that TRTs should be limited to hole diameters of 152 mm (6 in.). This size restriction arises from the increased thermal inertia of larger diameter heat exchangers, which invalidates the assumption of a steady state within the concrete needed to interpret the test data by traditional line source analysis techniques. However, new methods of analysis for pile heat exchangers have recently been developed that take account of the transient behaviour of the pile concrete. This paper applies these new methods to data from a multi-stage TRT conducted on a small diameter test pile. The thermal conductivity and thermal resistance determined using this method are then compared with those from traditional analytical approaches based on a line source analysis. Differences between the approaches are discussed, along with the observation that the thermal resistance may not be constant over the different test stages

Investigation of cycling-induced microstructural degradation in silicon-based electrodes in lithium-ion batteries using X-ray nanotomography

The microstructural degradation of a composite silicon electrode at different stages in its cycle life was investigated in 3D using X-ray nano-computed tomography. A reconstructed volume of 36 μm × 27 μm × 26 μm from the composite electrode was imaged in its pristine state and after 1, 10 and 100 cycles. Particle fracturing and phase transformation was observed within the electrode with increased cycling. In addition, a distinct, lower X-ray attenuating phase was clearly resolved, which can be associated with surface film formation resulting from electrolyte breakdown and with silicon particle phase transformation. Changes in quantified microstructural properties such as phase volume fraction and particle specific surface area were tracked. Electrode performance loss is associated with loss of active silicon. These imaging results further highlight the capability of high resolution X-ray tomography to investigate the role of electrode microstructure in battery degradation and failure

Unraveling the role of protein dynamics in dihydrofolate reductase catalysis

Protein dynamics have controversially been proposed to be at the heart of enzyme catalysis, but identification and analysis of dynamical effects in enzyme-catalyzed reactions have proved very challenging. Here, we tackle this question by comparing an enzyme with its heavy (15N, 13C, 2H substituted) counterpart, providing a subtle probe of dynamics. The crucial hydride transfer step of the reaction (the chemical step) occurs more slowly in the heavy enzyme. A combination of experimental results, quantum mechanics/molecular mechanics simulations, and theoretical analyses identify the origins of the observed differences in reactivity. The generally slightly slower reaction in the heavy enzyme reflects differences in environmental coupling to the hydride transfer step. Importantly, the barrier and contribution of quantum tunneling are not affected, indicating no significant role for “promoting motions” in driving tunneling or modulating the barrier. The chemical step is slower in the heavy enzyme because protein motions coupled to the reaction coordinate are slower. The fact that the heavy enzyme is only slightly less active than its light counterpart shows that protein dynamics have a small, but measurable, effect on the chemical reaction rate

Loop Interactions during Catalysis by Dihydrofolate Reductase fromMoritella profunda

Dihydrofolate reductase (DHFR) is often used as a model system to study the relation between protein dynamics and catalysis. We have studied a number of variants of the cold-adapted DHFR from Moritella profunda (MpDHFR), in which the catalytically important M20 and FG loops have been altered, and present a comparison with the corresponding variants of the wellstudied DHFR from Escherichia coli (EcDHFR). Mutations in the M20 loop do not affect the actual chemical step of transfer of hydride from reduced nicotinamide adenine dinucleotide phosphate to the substrate 7,8-dihydrofolate in the catalytic cycle in either enzyme; they affect the steady state turnover rate in EcDHFR but not in MpDHFR. Mutations in the FG loop also have different effects on catalysis by the two DHFRs. Despite the two enzymes most likely sharing a common catalytic cycle at pH 7, motions of these loops, known to be important for progression through the catalytic cycle in EcDHFR, appear not to play a significant role in MpDHFR

Achieving Consensus in the Development of an Online Intervention Designed to Effectively Support Midwives in Work-Related Psychological Distress: Protocol for a Delphi Study

BACKGROUND: The development of an online intervention designed to effectively support midwives in work-related psychological distress will be challenging due to the ethical, practical, and therapeutic issues surrounding its design. Related literature suggests that midwives may require an anonymous, confidential, and therapeutic platform that facilitates amnesty and nonpunitive approaches to remedy ill health. However, it is unclear which requirements may be most salient to midwifery populations. OBJECTIVE: The objective of this paper is to describe the design of a Delphi study, intended to achieve expert consensus on the needs of midwives in work-related psychological distress who may be supported via an online intervention. This protocol may also serve as a research framework for similar studies to be modeled upon. METHODS: A heterogeneous sample of at least thirty experts on psychological well-being and distress associated with midwifery work will be recruited. Their opinions regarding the development of an online intervention designed to support midwives in work-related psychological distress will be collected through 2 rounds of questioning, via the Delphi Technique. When 60% (≥18, assuming the minimum is 30) of panelists score within 2 adjacent points on a 7-point scale, consensus will be acknowledged. This Delphi study protocol will invite both qualitative and quantitative outcomes. RESULTS: This study is currently in development. It is financially supported by a full-time scholarship at the Centre for Technology Enabled Health Research at Coventry University (Coventry, UK). The implementation of this Delphi study is anticipated to occur during the autumn of 2015. CONCLUSIONS: The results of this study will direct the development of an online intervention designed to support midwives in work-related psychological distress, summarize expert driven consensus, and direct future research

Thermal Adaptation of Dihydrofolate Reductase from the Moderate ThermophileGeobacillus stearothermophilus

The thermal melting temperature of dihydrofolate reductase from Geobacillus stearothermophilus (BsDHFR) is 30 °C higher than that of its homologue from the psychrophile Moritella profunda. Additional proline residues in the loop regions of BsDHFR have been proposed to enhance the thermostability of BsDHFR, but site-directed mutagenesis studies reveal that these proline residues contribute only minimally. Instead, the high thermal stability of BsDHFR is partly due to removal of water-accessible thermolabile residues such as glutamine and methionine, which are prone to hydrolysis or oxidation at high temperatures. The extra thermostability of BsDHFR can be obtained by ligand binding, or in the presence of salts or cosolvents such as glycerol and sucrose. The sum of all these incremental factors allows BsDHFR to function efficiently in the natural habitat of G. stearothermophilus, which is characterized by temperatures that can reach 75 °C

Glass-Coated Beryllium Mirrors for the LHCb RICH1 Detector

The design, manufacture and testing of lightweight glass-coated beryllium spherical converging mirrors for the RICH1 detector of LHCb are described. The mirrors need to be lightweight to minimize the material budget and fluorocarbon-compatible to avoid degradation in the RICH1 C4F10 gas radiator. Results of the optical measurements for the small-sized prototypes and for the first full-sized prototype mirror are reported