298 research outputs found
Molecular collisions. 16: Comparison of GPS with classical trajectory calculations of rotational inelasticity for the Ar-N2 system
Comparison of generalized phase shift treatment with classical trajectory calculations of rotational inelasticity cross sections of Ar-N2 scatterin
Modelling the electronic structure and magnetic properties of LiFeAs and FeSe using hybrid-exchange density functional theory
The electronic structure and magnetic properties of LiFeAs and FeSe have been
studied using hybrid exchange density functional theory. The total energies for
a unit cell in LiFeAs and FeSe with different spin states including
non-magnetic and spin-2 are calculated. The spin-2 configuration has the lower
energy for both LiFeAs and FeSe. The computed anti-ferromagnetic exchange
interactions between spins on the nearest (next nearest) neighbouring Fe atoms
in LiFeAs and FeSe are approximately 14 (17) meV and 6 (13) meV respectively.
The total energies of the checkerboard and stripe-type anti-ferromagnetic
ordering for LiFeAs and FeSe are compared, yielding that for LiFeAs the
checkerboard is lower whereas for FeSe the stripe-type is lower. However, owing
to the fact that the exchange interaction of the next nearest neighbour is
larger than that of the nearest one, which means that the collinear ordering
might be the ground state. These results are in agreement with previous
theoretical calculations and experiments. Especially the calculations for
LiFeAs indicate a co-existence of conducting d-bands at the Fermi surface and
d-orbital magnetism far below the Fermi surface. The theoretical results
presented here might be useful for the experimentalists working on the
electronic structure and magnetism of iron-based superconductors.Comment: 7 pages, 4 figures, 1 table, accepted by Solid State Communication
Strain-Driven Mn-Reorganization in Overlithiated LixMn2O4 Epitaxial Thin-Film Electrodes
Lithium manganate LixMn2O4 (LMO) is a lithium ion cathode that suffers from the widely observed but poorly understood phenomenon of capacity loss due to Mn dissolution during electrochemical cycling. Here, operando X-ray reflectivity (low- and high-angle) is used to study the structure and morphology of epitaxial LMO (111) thin film cathodes undergoing lithium insertion and extraction to understand the inter-relationships between biaxial strain and Mn-dissolution. The initially strain-relieved LiMn2O4 films generate in-plane tensile and compressive strains for delithiated (x 1) charge states, respectively. The results reveal reversible Li insertion into LMO with no measurable Mn-loss for 0 1) reveals Mn loss from LMO along with dramatic changes in the intensity of the (111) Bragg peak that cannot be explained by Li stoichiometry. These results reveal a partially reversible site reorganization of Mn ions within the LMO film that is not seen in bulk reactions and indicates a transition in Mn-layer stoichiometry from 3:1 to 2:2 in alternating cation planes. Density functional theory calculations confirm that compressive strains (at x = 2) stabilize LMO structures with 2:2 Mn site distributions, therefore providing new insights into the role of lattice strain in the stability of LMO
Electron affinities of the first- and second- row atoms: benchmark ab initio and density functional calculations
A benchmark ab initio and density functional (DFT) study has been carried out
on the electron affinities of the first- and second-row atoms. The ab initio
study involves basis sets of and quality, extrapolations to
the 1-particle basis set limit, and a combination of the CCSD(T), CCSDT, and
full CI electron correlation methods. Scalar relativistic and spin-orbit
coupling effects were taken into account. On average, the best ab initio
results agree to better than 0.001 eV with the most recent experimental
results. Correcting for imperfections in the CCSD(T) method improves the mean
absolute error by an order of magnitude, while for accurate results on the
second-row atoms inclusion of relativistic corrections is essential. The latter
are significantly overestimated at the SCF level; for accurate spin-orbit
splitting constants of second-row atoms inclusion of (2s,2p) correlation is
essential. In the DFT calculations it is found that results for the 1st-row
atoms are very sensitive to the exchange functional, while those for second-row
atoms are rather more sensitive to the correlation functional. While the LYP
correlation functional works best for first-row atoms, its PW91 counterpart
appears to be preferable for second-row atoms. Among ``pure DFT'' (nonhybrid)
functionals, G96PW91 (Gill 1996 exchange combined with Perdew-Wang 1991
correlation) puts in the best overall performance. The best results overall are
obtained with the 1-parameter hybrid modified Perdew-Wang (mPW1) exchange
functionals of Adamo and Barone [J. Chem. Phys. {\bf 108}, 664 (1998)], with
mPW1LYP yielding the best results for first-row, and mPW1PW91 for second-row
atoms. Indications exist that a hybrid of the type mPW1LYP +
mPW1PW91 yields better results than either of the constituent functionals.Comment: Phys. Rev. A, in press (revised version, review of issues concerning
DFT and electron affinities added
Uniform electron gases
We show that the traditional concept of the uniform electron gas (UEG) --- a
homogeneous system of finite density, consisting of an infinite number of
electrons in an infinite volume --- is inadequate to model the UEGs that arise
in finite systems. We argue that, in general, a UEG is characterized by at
least two parameters, \textit{viz.} the usual one-electron density parameter
and a new two-electron parameter . We outline a systematic
strategy to determine a new density functional across the
spectrum of possible and values.Comment: 8 pages, 2 figures, 5 table
Does Al4H14— cluster anion exist? High-level ab initio study
A comprehensive ab initio investigation using coupled cluster theory with the aug-cc-pVnZ, n = D,T basis sets is carried out to identify distinct structures of the Al4H14— cluster anion and to evaluate its fragmentation stability. Both thermodynamic and mechanistic aspects of the fragmentation reactions are studied. The observation of this so far the most hydrogenated aluminum tetramer was reported in the recent mass spectrometry study of Li et al. (2010) J Chem Phys 132:241103–241104. The four Al4H14— anion structures found are chain-like with the multiple-coordinate Al center and can be viewed approximately as comprising Al2H7— and Al2H7 moieties. Locating computationally some of the Al4H14— minima on the correlated ab initio potential energy surfaces required the triple-zeta quality basis set to describe adequately the Al multi-coordinate bonding. For the two most stable Al4H14— isomers, the mechanism of their low-barrier interconversion is described. The dissociation of Al4H14— into the Al2H7— and Al2H7 units is predicted to require 20-22 (10-13) kcal mol-1 in terms of ΔH (ΔG) estimated at T = 298.15 K and p = 1 atm. However, Al4H14— is found to be a metastable species in the gas phase: the H2 loss from the radical moiety of its most favorable isomer is exothermic by 18 kcal mol-1 in terms of ΔH (298.15 K) and by 25 kcal mol-1 in terms of ΔG(298.15 K), with the enthalpic/free energy barrier involved being less than 1 kcal mol-1. By contrast with alane Al4H14—, only a weakly bound complex between Ga4H12— and H2 has been identified for the gallium analogue using the relativistic effective core potential
Consequence of one-electron oxidation and one-electron reduction for aniline
Quantum-chemical calculations were performed for all possible isomers of neutral aniline and its redox forms, and intramolecular proton-transfer (prototropy) accompanied by π-electron delocalization was analyzed. One-electron oxidation (PhNH2 – e → [PhNH2]+•) has no important effect on tautomeric preferences. The enamine tautomer is preferred for oxidized aniline similarly as for the neutral molecule. Dramatical changes take place when proceeding from neutral to reduced aniline. One-electron reduction (PhNH2 + e → [PhNH2]-•) favors the imine tautomer. Independently on the state of oxidation, π- and n-electrons are more delocalized for the enamine than imine tautomers. The change of the tautomeric preferences for reduced aniline may partially explain the origin of the CH tautomers for reduced nucleobases (cytosine, adenine, and guanine)
Random-phase approximation and its applications in computational chemistry and materials science
The random-phase approximation (RPA) as an approach for computing the
electronic correlation energy is reviewed. After a brief account of its basic
concept and historical development, the paper is devoted to the theoretical
formulations of RPA, and its applications to realistic systems. With several
illustrating applications, we discuss the implications of RPA for computational
chemistry and materials science. The computational cost of RPA is also
addressed which is critical for its widespread use in future applications. In
addition, current correction schemes going beyond RPA and directions of further
development will be discussed.Comment: 25 pages, 11 figures, published online in J. Mater. Sci. (2012
Calculation of molecular thermochemical data and their availability in databases
Thermodynamic properties of molecules can be obtained by experiment, by statistical mechanics in conjunction with electronic structure theory and by empirical rules like group additivity. The latter two methods are briefly re-viewed in this chapter. The overview of electronic structure methods is intended for readers less experienced in electronic structure theory and focuses on concepts without going into mathematical details. This is followed by a brief description of group additivity schemes; finally, an overview of databases listing reliable thermochemical data is given
- …