26 research outputs found

    Precision scans of the pixel cell response of double sided 3D pixel detectors to pion and x-ray beams

    Get PDF
    hree-dimensional (3D) silicon sensors offer potential advantages over standard planar sensors for radiation hardness in future high energy physics experiments and reduced charge-sharing for X-ray applications, but may introduce inefficiencies due to the columnar electrodes. These inefficiencies are probed by studying variations in response across a unit pixel cell in a 55μm pitch double-sided 3D pixel sensor bump bonded to TimePix and Medipix2 readout ASICs. Two complementary characterisation techniques are discussed: the first uses a custom built telescope and a 120GeV pion beam from the Super Proton Synchrotron (SPS) at CERN; the second employs a novel technique to illuminate the sensor with a micro-focused synchrotron X-ray beam at the Diamond Light Source, UK. For a pion beam incident perpendicular to the sensor plane an overall pixel efficiency of 93.0±0.5% is measured. After a 10o rotation of the device the effect of the columnar region becomes negligible and the overall efficiency rises to 99.8±0.5%. The double-sided 3D sensor shows significantly reduced charge sharing to neighbouring pixels compared to the planar device. The charge sharing results obtained from the X-ray beam study of the 3D sensor are shown to agree with a simple simulation in which charge diffusion is neglected. The devices tested are found to be compatible with having a region in which no charge is collected centred on the electrode columns and of radius 7.6±0.6μm. Charge collection above and below the columnar electrodes in the double-sided 3D sensor is observed

    Supersymmetric solutions of PT-/non-PT-symmetric and non-Hermitian Screened Coulomb potential via Hamiltonian hierarchy inspired variational method

    Get PDF
    The supersymmetric solutions of PT-symmetric and Hermitian/non-Hermitian forms of quantum systems are obtained by solving the Schrodinger equation for the Exponential-Cosine Screened Coulomb potential. The Hamiltonian hierarchy inspired variational method is used to obtain the approximate energy eigenvalues and corresponding wave functions.Comment: 13 page

    Effect of maternal oxytocin on umbilical venous and arterial blood flows during physiological-based cord clamping in preterm lambs

    Get PDF
    Background Delayed umbilical cord clamping (UCC) after birth is thought to cause placental to infant blood transfusion, but the mechanisms are unknown. It has been suggested that uterine contractions force blood out of the placenta and into the infant during delayed cord clamping. We have investigated the effect of uterine contractions, induced by maternal oxytocin administration, on umbilical artery (UA) and venous (UV) blood flows before and after ventilation onset to determine whether uterine contractions cause placental transfusion in preterm lambs.Methods and findingsAt similar to 128 days of gestation, UA and UV blood flows, pulmonary arterial blood flow (PBF) and carotid arterial (CA) pressures and blood flows were measured in three groups of fetal sheep during delayed UCC; maternal oxytocin following mifepristone, mifepristone alone, and saline controls. Each successive uterine contraction significantly (pDevelopmen

    Elastic and thermodynamic properties of alpha-Bi2O3 at high pressures: Study of mechanical and dynamical stability

    Full text link
    [EN] The elastic and thermodynamic properties of the monoclinic polymorph of bismuth oxide (alpha-Bi2O3); aka mineral bismite, have been theoretically investigated both at room pressure and under hydrostatic compression by means of first principles calculations based on density functional theory. In this work, the elastic stiffness coefficients, elastic moduli, Poisson's ratio, B/G ratio, elastic anisotropy indexes (A(B), A(G), A(1), A(2), A(3), Au) and directional dependence of Young modulus and linear compressibility have been obtained. Vickers hardness, and sound wave velocities have been calculated. Our simulations show that bismite has a high elastic anisotropy. alpha-Bi2O3 is a ductile material whose elastic anisotropy increases under compression and presents a stronger ability to resist volume compression than shear deformation at all pressures. Besides, it has a very small minimum thermal conductivity, which is well suited for thermoelectric applications. Finally, the mechanical and dynamical stability of bismite at high pressure has been studied and it has been found that alpha-Bi2O3 becomes mechanically unstable at pressures beyond 19.3 GPa and dynamically unstable above 11.5 GPa. These instabilities could be responsible for the amorphization of bismite observed experimentally between 15 and 20 GPa.This research was supported by the Spanish Ministerio de Economia y Competitividad under Projects MAT2016-75586-C4-2-P/3-P and MAT2015-71070-REDC. P.R.-H. and A.M. acknowledge Red Espanola de SupercomputaciOn (RES) and MALTA-Cluster for the computing time.Gomis, O.; Manjón, F.; Rodríguez-Hernández, P.; Muñoz, A. (2019). Elastic and thermodynamic properties of alpha-Bi2O3 at high pressures: Study of mechanical and dynamical stability. Journal of Physics and Chemistry of Solids. 124:111-120. https://doi.org/10.1016/j.jpcs.2018.09.002S11112012

    The use of individual tree statistics to quantify effects in an 'acid mist' experiment with mature trees

    No full text
    Mature trees of a single clone of Sitka spruce (Picea sitchensis (Bong.) Carr.) growing in the field were exposed to simulated acid mist at pH 2.5 over three successive years. The growth of each tree in the acid mist treatment, in terms of the stem area increment, was related to the pattern of growth of the untreated trees at the site during 1991 and 1992. In 1993, the effects of stopping the acid mist treatment on half of the treated trees was investigated by comparing the actual growth against that predicted relative to the untreated trees on the basis of the previous years'' data. The prediction of growth from one year to the next was consistently too small for the smallest acid-misted trees, suggesting that the growth rates relative to the untreated trees were increasing with time. Relative to the trees which continued to receive acid mist, however, the smaller trees which received no further acid mist in 1993 grew less than predicted, but there was a significantly greater growth than predicted for the largest recovering trees. Results from the individual tree modelling approach showed that a 10% change in relative stem area increment would be detectable at the 5% level, using a block of 4 trees as a treatment unit. The statistical techniques used are alternatives to conventional ANOVA calculations in determining statistically significant treatment effects where numbers of replicates are small
    corecore