The Influence of Foot-Strike Technique on the Neuromechanical Function of the Foot

This is the author accepted manuscript. The final version is available from Lippincott, Williams & Wilkins via the DOI in this recordPURPOSE: The aim of this study was to investigate the influence of foot-strike technique on longitudinal arch mechanics and intrinsic foot muscle function during running. METHODS: Thirteen healthy participants ran barefoot on a force-instrumented treadmill at 2.8 ms with a forefoot (FFS) and rearfoot (RFS; habitual) running technique, whereas kinetic, kinematic, and electromyographic data from the intrinsic foot muscles were collected simultaneously. The longitudinal arch was modeled as a single "midfoot" joint representing motion of the rearfoot (calcaneus) relative to the forefoot (metatarsals). An inverse dynamic analysis was performed to estimate joint moments generated about the midfoot, as well as mechanical work and power. RESULTS: The midfoot was more plantar flexed (higher arch) at foot contact when running with a forefoot running technique (RFS 0.2 ± 1.8 vs FFS 6.9 ± 3.0°, effect size (ES) = 2.7); however, there was no difference in peak midfoot dorsiflexion in stance (RFS -11.6 ± 3.0 vs FFS -11.4 ± 3.4°, ES = 0.63). When running with a forefoot technique, participants generated greater moments about the midfoot (27% increase, ES = 1.1) and performed more negative work (240% increase, ES = 2.2) and positive work (42% increase, ES = 1.1) about the midfoot. Average stance-phase muscle activation was greater for flexor digitorum brevis (20% increase, ES = 0.56) and abductor hallucis (17% increase, ES = 0.63) when running with a forefoot technique. CONCLUSIONS: Forefoot running increases loading about the longitudinal arch and also increases the mechanical work performed by the intrinsic foot muscles. These findings have substantial implications in terms of injury prevention and management for runners who transition from a rearfoot to a forefoot running technique.Funding for this study was provided via an industry research grant from Asics Oceania (grant identification number 2014000885

The effect of cadence on the muscle-tendon mechanics of the gastrocnemius muscle during walking

This is the author accepted manuscript. The final version is available from Wiley via the DOI in this recordHumans naturally select a cadence that minimizes metabolic cost at a constant walking velocity. The aim of this study was to examine the effects of cadence on the medial gastrocnemius (MG) muscle and tendon interaction, and examine how this might influence lower limb energetics. We hypothesized that cadences higher than preferred would increase MG fascicle shortening velocity because of the reduced stride time. Furthermore, we hypothesized that cadences lower than preferred would require greater MG fascicle shortening to achieve increased muscle work requirements. We measured lower limb kinematics and kinetics, surface electromyography of the triceps surae and MG fascicle length, via ultrasonography, during walking at a constant velocity at the participants' preferred cadence and offsets of ±10%, ±20%, and ±30%. There was a significant increase in MG fascicle shortening with decreased cadence. However, there was no increase in the MG fascicle shortening velocity at cadences higher than preferred. Cumulative MG muscle activation per minute was significantly increased at higher cadences. We conclude that low cadence walking requires more MG shortening work, while MG muscle and tendon function changes little for each stride at higher cadences, driving up cumulative activation costs due to the increase in steps per minute.Scott Brennan is supported by an Australian Postgraduate Scholarship. Dominic Farris is supported by the Australian Sports Commission

The role of human ankle plantar flexor muscle-tendon interaction and architecture in maximal vertical jumping examined in vivo

This is the final version. Available from Company of Biologists via the DOI in this record.Humans utilise elastic tendons of lower limb muscles to store and return energy during walking, running and jumping. Anuran and insect species use skeletal structures and/or dynamics in conjunction with similarly compliant structures to amplify muscle power output during jumping. We sought to examine whether human jumpers use similar mechanisms to aid elastic energy usage in the plantar flexor muscles during maximal vertical jumping. Ten male athletes performed maximal vertical squat jumps. Three-dimensional motion capture and a musculoskeletal model were used to determine lower limb kinematics that were combined with ground reaction force data in an inverse dynamics analysis. B-mode ultrasound imaging of the lateral gastrocnemius (GAS) and soleus (SOL) muscles was used to measure muscle fascicle lengths and pennation angles during jumping. Our results highlighted that both GAS and SOL utilised stretch and recoil of their series elastic elements (SEEs) in a catapult-like fashion, which likely serves to maximise ankle joint power. The resistance of supporting of body weight allowed initial stretch of both GAS and SOL SEEs. A proximal-to-distal sequence of joint moments and decreasing effective mechanical advantage early in the extension phase of the jumping movement were observed. This facilitated a further stretch of the SEE of the biarticular GAS and delayed recoil of the SOL SEE. However, effective mechanical advantage did not increase late in the jump to aid recoil of elastic tissues.D.J.F. is supported by a post-doctoral fellowship funded by the Australian Sports Commission

Stepping onto the unknown: reflexes of the foot and ankle while stepping with perturbed perceptions of terrain

This is the author accepted manuscript. The final version is available from the Royal Society via e the DOI in this recordData availability: The data from this study and the code to generate the figures and statistics are publically available at 10.6084/m9.figshare.12986223Unanticipated variations in terrain can destabilize the body. The foot is the primary interface with the ground and we know that cutaneous reflexes provide important sensory feedback. However, little is known about the contribution of stretch reflexes from the muscles within the foot to upright stability. We used intramuscular electromyography measurements of the foot muscles flexor digitorum brevis (FDB) and abductor hallucis (AH) to show for the first time how their short latency stretch reflex response (SLR) may play an important role in responding to stepping perturbations. The SLR of FDB and AH was highest for downwards steps and lowest for upwards steps, with the response amplitude for level and compliant steps in between. When the type of terrain was unknown or unexpected to the participant, the SLR of AH and the ankle muscle soleus tended to decrease. We found significant relationships between the contact kinematics and forces of the leg and the SLR, but a person’s expectation still had significant effects even after accounting for these relationships. Motor control models of short latency body stabilization should not only include local muscle dynamics, but also predictions of terrain based on higher-level information such as from vision or memory

Neuromechanical adaptations of foot function to changes in surface stiffness during hopping

This is the author accepted manuscript. The final version is available from the American Physiological Society via the DOI in this recordHumans choose work-minimizing movement strategies when interacting with compliant surfaces. Our ankles are credited with stiffening our lower limbs and maintaining the excursion of our body's center of mass on a range of surface stiffnesses. We may also be able to stiffen our feet through an active contribution from our plantar intrinsic muscles (PIMs) on such surfaces. However, traditional modelling of the ankle joint has masked this contribution. We compared foot and ankle mechanics and muscle activation on Low, Medium and High stiffness surfaces during bilateral hopping using a traditional and anatomical ankle model. The traditional ankle model overestimated work and underestimated quasi-stiffness compared to the anatomical model. Hopping on a low stiffness surface resulted in less longitudinal arch compression with respect to the high stiffness surface. However, because midfoot torque was also reduced, midfoot quasi-stiffness remained unchanged. We observed lower activation of the PIMs, soleus and tibialis anterior on the low and medium stiffness conditions, which paralleled the pattern we saw in the work performed by the foot and ankle. Rather than performing unnecessary work, participants altered their landing posture to harness the energy stored by the sprung surface in the low and medium conditions. These findings highlight our preference to minimize mechanical work when transitioning to compliant surfaces and highlight the importance of considering the foot as an active, multi-articular, part of the human leg

Neuromechanical adaptations of foot function when hopping on a damped surface

This is the author accepted manuscript. The final version is available on open access from the American Physiological Society via the DOI in this recordTo preserve motion, humans must adopt actuator-like dynamics to replace energy that is dissipated during contact with damped surfaces. Our ankle plantar flexors are credited as the primary source of work generation. Our feet and their intrinsic foot muscles also appear to be an important source of generative work, but their contributions to restoring energy to the body remain unclear. Here, we test the hypothesis that our feet help to replace work dissipated by a damped surface through controlled activation of the intrinsic foot muscles. We used custom-built platforms to provide both elastic and damped surfaces and asked participants to perform a bilateral hopping protocol on each. We recorded foot motion and ground reaction forces, alongside muscle activation, using intramuscular electromyography from flexor digitorum brevis, abductor hallucis, soleus and tibialis anterior. Hopping in the Damped condition resulted in significantly greater positive work and contact-phase muscle activation compared to the Elastic condition. The foot contributed 25% of the positive work performed about the ankle, highlighting the importance of the foot when humans adapt to different surfaces.Australian Research Council (ARC)QUEX Institut

An empirical approach towards the efficient and optimal production of influenza-neutralizing ovine polyclonal antibodies demonstrates that the novel adjuvant CoVaccine HT(TM) is functionally superior to Freund's adjuvant

Passive immunotherapies utilising polyclonal antibodies could have a valuable role in preventing and treating infectious diseases such as influenza, particularly in pandemic situations but also in immunocompromised populations such as the elderly, the chronically immunosuppressed, pregnant women, infants and those with chronic diseases. The aim of this study was to optimise current methods used to generate ovine polyclonal antibodies. Polyclonal antibodies to baculovirus-expressed recombinant influenza haemagglutinin from A/Puerto Rico/8/1934 H1N1 (PR8) were elicited in sheep using various immunisation regimens designed to investigate the priming immunisation route, adjuvant formulation, sheep age, and antigen dose, and to empirically ascertain which combination maximised antibody output. The novel adjuvant CoVaccine HT™ was compared to Freund’s adjuvant which is currently the adjuvant of choice for commercial production of ovine polyclonal Fab therapies. CoVaccine HT™ induced significantly higher titres of functional ovine anti-haemagglutinin IgG than Freund’s adjuvant but with fewer side effects, including reduced site reactions. Polyclonal hyperimmune sheep sera effectively neutralised influenza virus in vitro and, when given before or after influenza virus challenge, prevented the death of infected mice. Neither the age of the sheep nor the route of antigen administration appeared to influence antibody titre. Moreover, reducing the administrated dose of haemagglutinin antigen minimally affected antibody titre. Together, these results suggest a cost effective way of producing high and sustained yields of functional ovine polyclonal antibodies specifically for the prevention and treatment of globally significant diseases.Natalie E. Stevens, Cara K. Fraser, Mohammed Alsharifi, Michael P. Brown, Kerrilyn R. Diener, John D. Haybal

Developing a sense of place toolkit: Identifying destination uniqueness

It has long been recognised that the tangible and intangible characteristics that make a location distinctive and memorable, contribute significantly to destination image. How this destination feel is communicated, has largely been the domain of place branding and destination marketing, which have the potential to miss stakeholder voices. Recently though, practitioners are starting to carefully consider ‘sense of place’; that is an emotional attachment to place, which is defined more carefully in the literature review of this article, and which corresponds with long-running academic discussions. This paper attempts to identify some of these and bridge the gap between academic theory on sense of place and practice. In the UK, many rural areas are now seeking to operationalise sense of place through toolkit documents that might inform landscape interpretation and destination branding. A scenario echoed internationally, where local distinctiveness features in both rural and urban planning. However, sense of place in a tourism context, and more specifically the development of these toolkits, has received limited academic attention. Hence, this paper presents the case of Morecambe Bay, and the development of a dedicated sense of place toolkit. The subsequent case emerges from a collaboration between academics and practitioners and draws on participant observation, semi-structured interviews and document analysis. Specifically, the paper outlines a series of workshop activities developed with destination stakeholders and identifies how these inform subsequent toolkit design. It offers a critical analysis of the benefits and potential pitfalls of employing this approach. This case is of value to academics and destination stakeholders interested in identifying and communicating the uniqueness and emotional tone of the destination. Key lessons and recommendations are identified for those engaging in similar toolkit development initiatives