Remote measurement utilizing NASA's scanning laser Doppler systems. Volume 1. Laser Doppler wake vortex tracking at Kennedy Airport

Test operations of the Scanning Laser Doppler System (SLDS) at Kennedy International Airport (KIA) during August 1974 through June 1975 are reported. A total of 1,619 data runs was recorded with a totally operational system during normal landing operations at KIA. In addition, 53 data runs were made during cooperative flybys with the C880 for a grand total of 1672 recorded vortex tracks. Test crews were in attendance at KIA for 31 weeks, of which 25 weeks were considered operational and the other six were packing, unpacking, setup and check out. Although average activity equates to 67 recorded landing operations per week, two periods of complete runway inactivity spanned 20 days and 13 days, respectively. The operation frequency therefore averaged about 88 operations per week

Enhanced Eshelby twist on thin wurtzite InP nanowires and measurement of local crystal rotation

We have performed a detailed study of the lattice distortions of InP wurtzite nanowires containing an axial screw dislocation. Eshelby predicted that this kind of system should show a crystal rotation due to the dislocation induced torque. We have measured the twisting rate and the dislocation Burgers vector on individual wires, revealing that nanowires with a 10-nm radius have a twist up to 100% larger than estimated from elasticity theory. The strain induced by the deformation has a Mexican-hat-like geometry, which may create a tube-like potential well for carriers

Evidence-based Health Informatics Frameworks for Applied Use.

Health Informatics frameworks have been created surrounding the implementation, optimization, adoption, use and evaluation of health information technology including electronic health record systems and medical devices. In this contribution, established health informatics frameworks are presented. Important considerations for each framework are its purpose, component parts, rigor of development, the level of testing and validation its undergone, and its limitations. In order to understand how to use a framework effectively, it's often necessary to seek additional explanation via literature, documentation, and discussions with the developers

Where is my sink? Reconstruction of landscape development in 1 southwestern Africa since the Late Jurassic

Quantifying the rates and timing of landscape denudation provides a means to constrain sediment flux through time to offshore sedimentary basins. The Late Mesozoic evolution of drainage basins in southern Africa is poorly constrained despite the presence of several onshore and offshore sedimentary basins. A novel approach has been developed to calculate the volume of material eroded since the Late Jurassic at different time steps by constructing structural cross-sections and extrapolating thicknesses of eroded material. Using different assumptions, the calculated volumes of material eroded from southwestern Africa range from 2.52x10⁶ km³ (11.3 km of vertical thickness removed) to 8.87 x10⁵ km³ (4.0 km of vertical thickness removed). For the southward draining systems alone, the calculated removal of 7.81 x10⁵ – 2.60 x10⁵ km³ of material is far greater than the volumes of sediment recorded in offshore sedimentary basins (268 500 km³). Reconstruction of the drainage systems using geomorphic indicators and clast provenance of the Uitenhage Group, as well as extrapolated surface exposure ages, indicate the southern draining systems were active from the Late Jurassic with coeval activity in axial and transverse drainage systems. The calculated volumes are tied to published apatite fission track (AFT) dates to constrain the changes in exhumation rate through time (using multiple scenarios), which indicate a significant amount of Early Cretaceous exhumation (up to 1.26 x10⁶ km³, equivalent to 5.70km of vertical thickness). For the first time, this has permitted long-term landscape evolution to be used to support the interpretation that some of the ‘missing’ sediment was deposited in sedimentary basins on the Falkland Plateau as it moved past southern Africa during the Early Cretaceous. This implies that in this instance, the sinks are separated from their source areas by ~6000 km

Evolution of precipitates, in particular cruciform and cuboid particles, during simulated direct charging of thin slab cast vanadium microalloyed steels

A study has been undertaken of four vanadium based steels which have been processed by a simulated direct charging route using processing parameters typical of thin slab casting, where the cast product has a thickness of 50 to 80mm ( in this study 50 mm) and is fed directly to a furnace to equalise the microstructure prior to rolling. In the direct charging process, cooling rates are faster, equalisation times shorter and the amount of deformation introduced during rolling less than in conventional practice. Samples in this study were quenched after casting, after equalisation, after 4th rolling pass and after coiling, to follow the evolution of microstructure. The mechanical and toughness properties and the microstructural features might be expected to differ from equivalent steels, which have undergone conventional processing. The four low carbon steels (~0.06wt%) which were studied contained 0.1wt%V (V-N), 0.1wt%V and 0.010wt%Ti (V-Ti), 0.1wt%V and 0.03wt%Nb (V-Nb), and 0.1wt%V, 0.03wt%Nb and 0.007wt%Ti (V-Nb-Ti). Steels V-N and V-Ti contained around 0.02wt% N, while the other two contained about 0.01wt%N. The as-cast steels were heated at three equalising temperatures of 1050C, 1100C or 1200C and held for 30-60 minutes prior to rolling. Optical microscopy and analytical electron microscopy, including parallel electron energy loss spectroscopy (PEELS), were used to characterise the precipitates. In the as-cast condition, dendrites and plates were found. Cuboid particles were seen at this stage in Steel V-Ti, but they appeared only in the other steels after equalization. In addition, in the final product of all the steels, fine particles were seen, but it was only in the two titanium steels that cruciform precipitates were present. PEELS analysis showed that the dendrites, plates, cuboids, cruciforms and fine precipitates were essentially nitrides. The two Ti steels had better toughness than the other steels but inferior lower yield stress values. This was thought to be, in part, due to the formation of cruciform precipitates in austenite, thereby removing nitrogen and the microalloying elements which would have been expected to precipitate in ferrite as dispersion hardening particles

Evolution of interdisciplinarity in biodiversity science

The study of biodiversity has grown exponentially in the last thirty years in response to demands for greater understanding of the function and importance of Earth's biodiversity and finding solutions to conserve it. Here, we test the hypothesis that biodiversity science has become more interdisciplinary over time. To do so, we analyze 97,945 peer‐reviewed articles over a twenty‐two‐year time period (1990–2012) with a continuous time dynamic model, which classifies articles into concepts (i.e., topics and ideas) based on word co‐occurrences. Using the model output, we then quantify different aspects of interdisciplinarity: concept diversity, that is, the diversity of topics and ideas across subdisciplines in biodiversity science, subdiscipline diversity, that is, the diversity of subdisciplines across concepts, and network structure, which captures interactions between concepts and subdisciplines. We found that, on average, concept and subdiscipline diversity in biodiversity science were either stable or declining, patterns which were driven by the persistence of rare concepts and subdisciplines and a decline in the diversity of common concepts and subdisciplines, respectively. Moreover, our results provide evidence that conceptual homogenization, that is, decreases in temporal β concept diversity, underlies the observed trends in interdisciplinarity. Together, our results reveal that biodiversity science is undergoing a dynamic phase as a scientific discipline that is consolidating around a core set of concepts. Our results suggest that progress toward addressing the biodiversity crisis via greater interdisciplinarity during the study period may have been slowed by extrinsic factors, such as the failure to invest in research spanning across concepts and disciplines. However, recent initiatives such as the Intergovernmental Science‐Policy Platform on Biodiversity and Ecosystem Services (IPBES) may attract broader support for biodiversity‐related issues and hence interdisciplinary approaches to address scientific, political, and societal challenges in the coming years

Influence of computed tomography angiography reconstruction software on anatomic measurements and endograft component selection for endovascular abdominal aortic aneurysm repair

ObjectiveThree-dimensional (3D) centerline reconstruction of computed tomography angiography (CTA) images permits detailed anatomic characterization of abdominal aortic aneurysms and facilitates planning of endovascular repair. Although several programs for 3D CTA reconstruction and measurement are available, direct comparisons have not been published, and reliability between software platforms has not been characterized. We evaluated agreement between anatomic measurements obtained from 3D CTA reconstructions using three commercially available software programs and characterized concordance between the programs for endograft component selection.MethodsImages from 92 CTA studies performed before abdominal aortic aneurysm repair were reconstructed and measured using three different software programs: independent reconstruction with proprietary software (Preview; M2S Inc, Lebanon, NH), surgeon-based reconstruction with proprietary software (AquariusNet Thin Client; TeraRecon Inc, San Mateo, Calif), and surgeon-based reconstruction with open-source software (Osirix MD; Pixmeo, Geneva, Switzerland). Agreement between outer wall diameter and length measurements obtained from centerline reconstructions created with each program was evaluated using scatter plots, intraclass correlation coefficients, and Bland-Altman plots. Concordance between aortic and iliac endograft component diameters selected from measurements with each program based on published instructions for use was examined using weighted κ statistics.ResultsDiameter measurements were generally similar between programs. Mean diameters at all locations were within ≤1 mm of one another, and mean length measurements were within ≤10 mm of one another for all pairwise comparisons. Intraclass correlations coefficients between programs for diameter measurements were comparable between programs (≥0.82 for all diameter comparisons and ≥0.88 for all length comparisons) and indicated good correlation. Pair-wise comparisons indicated similar rates of identical and adjacent size endograft component selection without an obvious trend toward superior agreement for any two programs. Rates of identical proximal endograft diameter selection ranged from 46% to 59%, whereas 89% to 100% of proximal endograft diameters selected between programs were within one adjacent (smaller or larger) size of each other. For iliac endograft selection, rates of identical component diameter selection between programs ranged from 36% to 69%, and 58% to 99% of selected iliac endograft diameters were within one adjacent size.ConclusionsOuter wall diameter and centerline length measurements obtained from 3D CTA reconstructions demonstrated good correlation between imaging analysis software programs, and graft diameter selections based on these measurements were reasonably similar. Comparable 3D CTA reconstruction measurements can be generated from independent and surgeon-based approaches using proprietary and open-source software, and the selection of a method to interpret images for endograft planning can be individualized according to operator experience and available resources while retaining sufficient accuracy