Comparison of antibacterial activity and cytotoxicity of silver nanoparticles and silver-loaded montmorillonite and saponite

Although silver nanoparticles are known for their antibacterial activity, little research has been carried out on what synthesis method provides the most effective particles. In this study, silver nanoparticles were synthesised via chemical reduction by using silver nitrate as the silver precursor, ascorbic acid as the reducing agent and sodium citrate as the stabilising agent. The solutions were adjusted to several pH values employing sodium hydroxide, citric acid or nitric acid. Dynamic light scattering and absorption spectra in the ultraviolet/visible region characterisation revealed that employing nitric acid to adjust the pH produced more varied and larger silver particle sizes. Then, silver nanoparticles were supported on montmorillonite and saponite through wet impregnation or ion exchange methods. Scanning electron microscopy, energy-dispersive X-ray spectroscopy and transmission electron microscopy characterisation confirmed that silver nanoparticles were successfully loaded onto the clay minerals. Next, the antibacterial activity of the samples was evaluated against Escherichia coli and Staphylococcus aureus by determining their minimum inhibitory concentrations and minimum bactericidal concentrations. The free silver nanoparticles did not show any antibacterial activity at 125 mg/L. In contrast, the silver-loaded samples obtained by wet impregnation and with a higher silver content displayed the strongest antibacterial effect. Finally, the cytotoxicity of the samples was determined in GM07492-A cell line by using an XTT colorimetric assay. The calculated IC50 values revealed that the supported silver nanoparticles were barely toxic. Thus, the silver-loaded clay minerals obtained here are promising antibacterial materials with a high-grade safety profile

Global monitoring of antimicrobial resistance based on metagenomics analyses of urban sewage

Antimicrobial resistance (AMR) is a serious threat to global public health, but obtaining representative data on AMR for healthy human populations is difficult. Here, we use meta-genomic analysis of untreated sewage to characterize the bacterial resistome from 79 sites in 60 countries. We find systematic differences in abundance and diversity of AMR genes between Europe/North-America/Oceania and Africa/Asia/South-America. Antimicrobial use data and bacterial taxonomy only explains a minor part of the AMR variation that we observe. We find no evidence for cross-selection between antimicrobial classes, or for effect of air travel between sites. However, AMR gene abundance strongly correlates with socio-economic, health and environmental factors, which we use to predict AMR gene abundances in all countries in the world. Our findings suggest that global AMR gene diversity and abundance vary by region, and that improving sanitation and health could potentially limit the global burden of AMR. We propose metagenomic analysis of sewage as an ethically acceptable and economically feasible approach for continuous global surveillance and prediction of AMR.Peer reviewe

Setting a baseline for global urban virome surveillance in sewage

The rapid development of megacities, and their growing connectedness across the world is becoming a distinct driver for emerging disease outbreaks. Early detection of unusual disease emergence and spread should therefore include such cities as part of risk-based surveillance. A catch-all metagenomic sequencing approach of urban sewage could potentially provide an unbiased insight into the dynamics of viral pathogens circulating in a community irrespective of access to care, a potential which already has been proven for the surveillance of poliovirus. Here, we present a detailed characterization of sewage viromes from a snapshot of 81 high density urban areas across the globe, including in-depth assessment of potential biases, as a proof of concept for catch-all viral pathogen surveillance. We show the ability to detect a wide range of viruses and geographical and seasonal differences for specific viral groups. Our findings offer a cross-sectional baseline for further research in viral surveillance from urban sewage samples and place previous studies in a global perspective

Comparison of antibacterial activity and cytotoxicity of silver nanoparticles and silver-loaded montmorillonite and saponite

Although silver nanoparticles are known for their antibacterial activity, little research has been carried out on what synthesis method provides the most effective particles. In this study, silver nanoparticles were synthesised via chemical reduction by using silver nitrate as the silver precursor, ascorbic acid as the reducing agent and sodium citrate as the stabilising agent. The solutions were adjusted to several pH values employing sodium hydroxide, citric acid or nitric acid. Dynamic light scattering and absorption spectra in the ultraviolet/visible region characterisation revealed that employing nitric acid to adjust the pH produced more varied and larger silver particle sizes. Then, silver nanoparticles were supported on montmorillonite and saponite through wet impregnation or ion exchange methods. Scanning electron microscopy, energy-dispersive X-ray spectroscopy and transmission electron microscopy characterisation confirmed that silver nanoparticles were successfully loaded onto the clay minerals. Next, the antibacterial activity of the samples was evaluated against Escherichia coli and Staphylococcus aureus by determining their minimum inhibitory concentrations and minimum bactericidal concentrations. The free silver nanoparticles did not show any antibacterial activity at 125 mg/L. In contrast, the silver-loaded samples obtained by wet impregnation and with a higher silver content displayed the strongest antibacterial effect. Finally, the cytotoxicity of the samples was determined in GM07492-A cell line by using an XTT colorimetric assay. The calculated IC50 values revealed that the supported silver nanoparticles were barely toxic. Thus, the silver-loaded clay minerals obtained here are promising antibacterial materials with a high-grade safety profile

Influence of the Carbo-Chromization Process on the Microstructural, Hardness, and Corrosion Properties of 316L Sintered Stainless Steel

We report on the changes on the microstructural, hardness, and corrosion properties induced by carbo-chromization of 316L stainless steel prepared by Spark Plasma Sintering technique. The thermo-chemical treatments have been performed using pack cementation. The carburizing and chromization were carried out between 1153 K (880 A degrees C)/4 h to 1253 K (980 A degrees C)/12 h and 1223 K (950 A degrees C)/6 h to 1273 K (1000 A degrees C)/12 h in a solid powder mixture of charcoal/BaCO3 and ferrochromium/alumina/NH4Cl, respectively. The obtained layers were investigated using X-ray and electron diffraction, optical and scanning electron microscopies, Vickers micro-hardness, and potentiodynamic measurements. The thickness of the carbo-chromized layer ranges between 300 and 500 mu m. Besides the host gamma-phase, the layers are mainly constituted of carbides (Fe7C3, Cr23C6, Cr7C3, and Fe3C) and traces of alpha'-martensite. The average hardness values decrease smoothly from 650 HV at the sample surface down to 200 HV at the center of the sample. The potentiodynamic tests revealed that the carbo-chromized samples have smaller corrosion resistance with respect to the untreated material. For strong chromization regimes, the corrosion rate is increased by a factor of four with respect to that of the untreated material, while the micro-hardness of the layer is three times larger. Such materials are suited to be used in environments where good corrosion resistance and wear properties are required

Setting a baseline for global urban virome surveillance in sewage

The rapid development of megacities, and their growing connectedness across the world is becoming a distinct driver for emerging disease outbreaks. Early detection of unusual disease emergence and spread should therefore include such cities as part of risk-based surveillance. A catch-all metagenomic sequencing approach of urban sewage could potentially provide an unbiased insight into the dynamics of viral pathogens circulating in a community irrespective of access to care, a potential which already has been proven for the surveillance of poliovirus. Here, we present a detailed characterization of sewage viromes from a snapshot of 81 high density urban areas across the globe, including in-depth assessment of potential biases, as a proof of concept for catch-all viral pathogen surveillance. We show the ability to detect a wide range of viruses and geographical and seasonal differences for specific viral groups. Our findings offer a cross-sectional baseline for further research in viral surveillance from urban sewage samples and place previous studies in a global perspective

Setting a baseline for global urban virome surveillance in sewage

The rapid development of megacities, and their growing connectedness across the world is becoming a distinct driver for emerging disease outbreaks. Early detection of unusual disease emergence and spread should therefore include such cities as part of risk-based surveillance. A catch-all metagenomic sequencing approach of urban sewage could potentially provide an unbiased insight into the dynamics of viral pathogens circulating in a community irrespective of access to care, a potential which already has been proven for the surveillance of poliovirus. Here, we present a detailed characterization of sewage viromes from a snapshot of 81 high density urban areas across the globe, including in-depth assessment of potential biases, as a proof of concept for catch-all viral pathogen surveillance. We show the ability to detect a wide range of viruses and geographical and seasonal differences for specific viral groups. Our findings offer a cross-sectional baseline for further research in viral surveillance from urban sewage samples and place previous studies in a global perspective

Setting a baseline for global urban virome surveillance in sewage

The rapid development of megacities, and their growing connectedness across the world is becoming a distinct driver for emerging disease outbreaks. Early detection of unusual disease emergence and spread should therefore include such cities as part of risk-based surveillance. A catch-all metagenomic sequencing approach of urban sewage could potentially provide an unbiased insight into the dynamics of viral pathogens circulating in a community irrespective of access to care, a potential which already has been proven for the surveillance of poliovirus. Here, we present a detailed characterization of sewage viromes from a snapshot of 81 high density urban areas across the globe, including in-depth assessment of potential biases, as a proof of concept for catch-all viral pathogen surveillance. We show the ability to detect a wide range of viruses and geographical and seasonal differences for specific viral groups. Our findings offer a cross-sectional baseline for further research in viral surveillance from urban sewage samples and place previous studies in a global perspective