29 research outputs found
Recommended from our members
An ocean-colour time series for use in climate studies: the experience of the ocean-colour climate change initiate (OC-CCI)
Ocean colour is recognised as an Essential Climate Variable (ECV) by the Global Climate Observing System (GCOS); and spectrally-resolved water-leaving radiances (or remote-sensing reflectances) in the visible domain, and chlorophyll-a concentration are identified as required ECV products. Time series of the products at the global scale and at high spatial resolution, derived from ocean-colour data, are key to studying the dynamics of phytoplankton at seasonal and inter-annual scales; their role in marine biogeochemistry; the global carbon cycle; the modulation of how phytoplankton distribute solar-induced heat in the upper layers of the ocean; and the response of the marine ecosystem to climate variability and change. However, generating a long time series of these products from ocean colour data is not a trivial task: algorithms that are best suited for climate studies have to be selected from a number that are available for atmospheric correction of the satellite signal and for retrieval of chlorophyll-a concentration; since satellites have a finite life span, data from multiple sensors have to be merged to create a single time series, and any uncorrected inter-sensor biases could introduce artefacts in the series, e.g., different sensors monitor radiances at different wavebands such that producing a consistent time series of reflectances is not straightforward. Another requirement is that the products have to be validated against in situ observations. Furthermore, the uncertainties in the products have to be quantified, ideally on a pixel-by-pixel basis, to facilitate applications and interpretations that are consistent with the quality of the data. This paper outlines an approach that was adopted for generating an ocean-colour time series for climate studies, using data from the MERIS (MEdium spectral Resolution Imaging Spectrometer) sensor of the European Space Agency; the SeaWiFS (Sea viewingWide-Field-of-view Sensor) and MODIS-Aqua (Moderate-resolution Imaging Spectroradiometer-Aqua) sensors from the National Aeronautics and Space Administration (USA); and VIIRS (Visible and Infrared Imaging Radiometer Suite) from the National Oceanic and Atmospheric Administration (USA). The time series now covers the period from late 1997 to end of 2018. To ensure that the products meet, as well as possible, the requirements of the user community, marine-ecosystem modellers, and remote-sensing scientists were consulted at the outset on their immediate and longer-term requirements as well as on their expectations of ocean-colour data for use in climate research. Taking the user requirements into account, a series of objective criteria were established, against which available algorithms for processing ocean-colour data were evaluated and ranked. The algorithms that performed best with respect to the climate user requirements were selected to process data from the satellite sensors. Remote-sensing reflectance data from MODIS-Aqua, MERIS, and VIIRS were band-shifted to match the wavebands of SeaWiFS. Overlapping data were used to correct for mean biases between sensors at every pixel. The remote-sensing reflectance data derived from the sensors were merged, and the selected in-water algorithm was applied to the merged data to generate maps of chlorophyll concentration, inherent optical properties at SeaWiFS wavelengths, and the diffuse attenuation
coefficient at 490 nm. The merged products were validated against in situ observations. The uncertainties established on the basis of comparisons with in situ data were combined with an optical classification of the remote-sensing reflectance data using a fuzzy-logic approach, and were used to generate uncertainties (root mean square difference and bias) for each product at each pixel
A compilation of global bio-optical in situ data for ocean colour satellite applications – version three
A global in situ data set for validation of ocean colour products from the ESA Ocean Colour Climate Change Initiative (OC-CCI) is presented. This version of the compilation, starting in 1997, now extends to 2021, which is important for the validation of the most recent satellite optical sensors such as Sentinel 3B OLCI and NOAA-20 VIIRS. The data set comprises in situ observations of the following variables: spectral remote-sensing reflectance, concentration of chlorophyll-a, spectral inherent optical properties, spectral diffuse attenuation coefficient, and total suspended matter. Data were obtained from multi-project archives acquired via open internet services or from individual projects acquired directly from data providers. Methodologies were implemented for homogenization, quality control, and merging of all data. Minimal changes were made on the original data, other than conversion to a standard format, elimination of some points, after quality control and averaging of observations that were close in time and space. The result is a merged table available in text format. Overall, the size of the data set grew with 148 432 rows, with each row representing a unique station in space and time (cf. 136 250 rows in previous version; Valente et al., 2019). Observations of remote-sensing reflectance increased to 68 641 (cf. 59 781 in previous version; Valente et al., 2019). There was also a near tenfold increase in chlorophyll data since 2016. Metadata of each in situ measurement (original source, cruise or experiment, principal investigator) are included in the final table. By making the metadata available, provenance is better documented and it is also possible to analyse each set of data separately. The compiled data are available at https://doi.org/10.1594/PANGAEA.941318 (Valente et al., 2022)
Convoluted double square: single layer FSS with close band spacings
A novel element provides reflection band ratios as low as 1.1. It is derived from the double square but is less demanding on printing definition. Together, the two elements offer increased flexibility in Frequency selective surface design for close band applications. Substrate loss effects are also discussed
Assessing the fitness-for-purpose of satellite multi-mission ocean color climate data records: A protocol applied to OC-CCI chlorophyll-a data
In this work, trend estimates are used as indicators to compare the multi-annual variability of different satellite chlorophyll-a (Chla) data and to assess the fitness-for-purpose of multi-mission Chla products as climate data records (CDR). Under the assumption that single-mission products are free from spurious temporal artifacts and can be used as benchmark time series, multi-mission CDRs should reproduce the main trend patterns observed by single-mission series when computed over their respective periods. This study introduces and applies quantitative metrics to compare trend distributions from different data records. First, contingency matrices compare the trend diagnostics associated with two satellite products when expressed in binary categories such as existence, significance and signs of trends. Contingency matrices can be further summarized by metrics such as Cohen's κ index that rates the overall agreement between the two distributions of diagnostics. A more quantitative measure of the discrepancies between trends is provided by the distributions of differences between trend slopes. Thirdly, maps of the level of significance P of a t-test quantifying the degree to which two trend estimates differ provide a statistical, spatially-resolved, evaluation. The proposed methodology is applied to the multi-mission Ocean Colour - Climate Change Initiative (OC-CCI) Chla data. The agreement between trend distributions associated with OC-CCI data and single-mission products usually appears as good as when single-mission products are compared. As the period of analysis is extended beyond 2012 to 2015, the level of agreement tends to be degraded, which might be at least partly due to the aging of the MODIS sensor on-board Aqua. On the other hand, the trends displayed by the OC-CCI series over the short period 2012-2015 are very consistent with those observed with VIIRS. These results overall suggest that the OC-CCI Chla data can be used for multi-annual time series analysis (including trend detection), but with some caution required if recent years are included, particularly in the central tropical Pacific. The study also recalls the challenges associated with creating a multi-mission ocean color data record suitable for climate research.JRC.D.2-Water and Marine Resource
On the temporal consistency of chlorophyll products derived from three ocean-colour sensors
Satellite ocean-colour sensors have life spans lasting typically five-to-ten years. Detection of long-term trends in chlorophyll-a concentration (Chl-a) using satellite ocean colour thus requires the combination of different ocean-colour missions with sufficient overlap to allow for cross-calibration. A further requirement is that the different sensors perform at a sufficient standard to capture seasonal and inter-annual fluctuations in ocean colour. For over eight years, between July 2002 and December 2010, the SeaWiFS, MODIS-Aqua and MERIS ocean colour sensors operated in parallel. In this paper, we evaluate the temporal consistency in the monthly Chl-a time-series and in monthly inter-annual variations in Chl-a among these three sensors over the 2002-2010 time period. By subsampling the monthly Chl-a data from the three sensors consistently, we found that the Chl-a time-series and Chl-a anomalies among sensors were significantly correlated for >90% of the global ocean.These correlations were also relatively insensitive to the choice of three Chl-a algorithms and two atmospheric correction algorithms. Furthermore, on the subsampled time-series, correlations between Chl-a and time, and correlations between Chl-a and physical variables (sea-surface temperature and sea-surface height) were not significantly different for >92% of the global ocean. The correlations in Chl-a and physical variables observed for all three sensors also reflected previous theories on coupling between physical processes and phytoplankton biomass. The results support the combining of Chl-a data from SeaWiFS, MODIS-Aqua and MERIS sensors, for use in long-term Chl-a trend analysis, and highlight the importance of accounting for differences in spatial sampling among sensors when combining ocean-colour observations.JRC.H.1-Water Resource
Overview of SMOS Level 2 Ocean Salinity processing and first results
International audienceSMOS (Soil Moisture and Ocean Salinity), launched in November 2, 2009 is the first satellite mission addressing the salinity measurement from space through the use of MIRAS (Microwave Imaging Radiometer with Aperture Synthesis), a new two-dimensional interferometer designed by the European Space Agency (ESA) and operating at L-band. This paper presents a summary of the sea surface salinity retrieval approach implemented in SMOS, as well as first results obtained after completing the mission commissioning phase in May 2010. A large number of papers have been published about salinity remote sensing and its implementation in the SMOS mission. An extensive list of references is provided here, many authored by the SMOS ocean salinity team, with emphasis on the different physical processes that have been considered in the SMOS salinity retrieval algorithm
SMOS: Objectives and Approach for Ocean Salinity Observations
International audienceSMOS (Soil Moisture and Ocean Salinity), launched in November 2, 2009 is the first satellite mission addressing the salinity measurement from space through the use of MIRAS (Microwave Imaging Radiometer with Aperture Synthesis), a new two-dimensional interferometer designed by the European Space Agency (ESA) and operating at L-band. This paper presents a summary of the sea surface salinity retrieval approach implemented in SMOS, as well as first results obtained after completing the mission commissioning phase in May 2010. A large number of papers have been published about salinity remote sensing and its implementation in the SMOS mission. An extensive list of references is provided here, many authored by the SMOS ocean salinity team, with emphasis on the different physical processes that have been considered in the SMOS salinity retrieval algorithm
SMOS: Objectives and Approach for Ocean Salinity Observations
International audienceSMOS (Soil Moisture and Ocean Salinity), launched in November 2, 2009 is the first satellite mission addressing the salinity measurement from space through the use of MIRAS (Microwave Imaging Radiometer with Aperture Synthesis), a new two-dimensional interferometer designed by the European Space Agency (ESA) and operating at L-band. This paper presents a summary of the sea surface salinity retrieval approach implemented in SMOS, as well as first results obtained after completing the mission commissioning phase in May 2010. A large number of papers have been published about salinity remote sensing and its implementation in the SMOS mission. An extensive list of references is provided here, many authored by the SMOS ocean salinity team, with emphasis on the different physical processes that have been considered in the SMOS salinity retrieval algorithm