Interfacial effects on the polarization of BiFeO3BiFeO_{3} films

By considering an interfacial layer between the electrode and the $BiFeO_{3}$($BFO$) layer, the polarization and the hysteresis behavior of $BFO$ film are simulated. It is found that the non-ferroelectric interface will increase the coercive field, and remarkably suppress the polarization of the ultrathin film under low applied fields. Due to the competition between the interfacial effect and the internal compressive stress, the maximum polarization on the P-E loop of a $BFO$ film can be independent on the film thickness under an adequate applied field.Comment: 3 pages, 2 figure

Akt1-Inhibitor of DNA binding2 is essential for growth cone formation and axon growth and promotes central nervous system axon regeneration.

Mechanistic studies of axon growth during development are beneficial to the search for neuron-intrinsic regulators of axon regeneration. Here, we discovered that, in the developing neuron from rat, Akt signaling regulates axon growth and growth cone formation through phosphorylation of serine 14 (S14) on Inhibitor of DNA binding 2 (Id2). This enhances Id2 protein stability by means of escape from proteasomal degradation, and steers its localization to the growth cone, where Id2 interacts with radixin that is critical for growth cone formation. Knockdown of Id2, or abrogation of Id2 phosphorylation at S14, greatly impairs axon growth and the architecture of growth cone. Intriguingly, reinstatement of Akt/Id2 signaling after injury in mouse hippocampal slices redeemed growth promoting ability, leading to obvious axon regeneration. Our results suggest that Akt/Id2 signaling is a key module for growth cone formation and axon growth, and its augmentation plays a potential role in CNS axonal regeneration

Composite type A thymoma and diffuse large B-cell lymphoma

AbstractThe concurrent occurrence of thymoma and diffuse large B-cell lymphoma in the thymus has not been previously reported. We describe a 74-year-old man who presented with general weakness, neck lymphadenopathy, night sweats, and body weight loss. A right anterior mediastinal mass was found on computed tomography of the chest. The immunohistochemical stains AE1/AE3, CD20, CD3, and MUM-1 confirmed the different components of the mediastinal tumor. A heavy-chain gene clonality assay and light-chain gene clonality assay confirmed the B-cell clonality of the mediastinal tumor and neck lymph node. The patient had received a complete course of chemotherapy, and the result of positron emission tomography–computed tomography showed complete remission. The pathologic report of this mass revealed composite type A thymoma and diffuse large B-cell lymphoma. If concurrent or composite thymoma and lymphoma are suspected, a thorough examination of the thymoma with a combination of ancillary studies is recommended to rule out the possibility of concurrent lymphoma

Highly efficient mode-locked and Q-switched Er3+-doped fiber lasers using a gold nanorod saturable absorber

Mode-locked and Q-switched pulsed fiber laser sources with wavelengths of 1.55 mu m are widely used in various fields. Gold nanorods (GNRs) have been applied in biomedicine and optics owing to their biocompatibility, easy fabrication, and unique optical properties. This paper presents the analysis of a saturable absorber based on a colloidal gold nanorod (GNR) thin film for dual-function passively mode-locked and Q-switched 1.55-mu m fiber lasers. The colloidal GNR thin film possesses superior properties such as a wide operating wavelength range, large nonlinear absorption coefficient, and a picosecond-order recovery time. Its modulation depth and saturation intensity at 1.55 mu m are 7.8% and 6.55 MW/cm(2), respectively. Passive mode-locked or Q-switched laser operation is achieved by changing the number of GNR thin-film layers. The advantages of these high-quality GNRs in mode-locked and Q-switched fiber lasers with record-high slope efficiency are verified by conducting comprehensive material and laser dynamic analyses. The self-starting mode-locked fiber laser with an efficiency as high as 24.91% and passively Q-switched fiber laser with the maximum energy of 0.403 mu J are successfully demonstrated. This paper presents the novel demonstration of reconfigurable mode-locked and Q-switched all-fiber lasers by incorporating colloidal GNR thin films

On the discovery of continuous truth: a semi-supervised approach with partial ground truths

In many applications, the information regarding to the same object can be collected from multiple sources. However, these multi-source data are not reported consistently. In the light of this challenge, truth discovery is emerged to identify truth for each object from multi-source data. Most existing truth discovery methods assume that ground truths are completely unknown, and they focus on the exploration of unsupervised approaches to jointly estimate object truths and source reliabilities. However, in many real world applications, a set of ground truths could be partially available. In this paper, we propose a semi-supervised truth discovery framework to estimate continuous object truths. With the help of ground truths, even a small amount, the accuracy of truth discovery can be improved. We formulate the semi-supervised truth discovery problem as an optimization task where object truths and source reliabilities are modeled as variables. The ground truths are modeled as a regularization term and its contribution to the source weight estimation can be controlled by a parameter. The experiments show that the proposed method is more accurate and efficient than the existing truth discovery methods

Synthetic studies on pterin glycosides: the first synthesis of 2′-O-(α-d-glucopyranosyl)biopterin

L-Rhamnose was led, in a 14-step-sequence, to N2-(N,N-dimethylaminomethylene)-1′-O-(4-methoxybenzyl)-3-[2-(4-nitrophenyl)ethyl]biopterin (23), an appropriately protected precursor for 2′-O-glycosylation, while 4,6-di-O-acetyl-2,3-di-O-(4-methoxybenzyl)-α-d-glucopyranosyl bromide (32), a novel glycosyl donor, was efficiently prepared from d-glucose in 8 steps. The first synthesis of 2′-O-(α-d-glucopyranosyl)biopterin (2a) was achieved by treatment of the key intermediate 23 with 32 in the presence of silver triflate and tetramethylurea, followed by successive removal of the protecting groups

Post-mortem re-cloning of a transgenic red fluorescent protein dog

Recently, the world's first transgenic dogs were produced by somatic cell nuclear transfer. However, cellular senescence is a major limiting factor for producing more advanced transgenic dogs. To overcome this obstacle, we rejuvenated transgenic cells using a re-cloning technique. Fibroblasts from post-mortem red fluorescent protein (RFP) dog were reconstructed with in vivo matured oocytes and transferred into 10 surrogate dogs. One puppy was produced and confirmed as a re-cloned dog. Although the puppy was lost during birth, we successfully established a rejuvenated fibroblast cell line from this animal. The cell line was found to stably express RFP and is ready for additional genetic modification

A transformative route to nanoporous manganese oxides of controlled oxidation states with identical textural properties

Nanoporous nanocrystalline metal oxides with tunable oxidation states are crucial for controlling their catalytic, electronic, and optical properties. However, previous approaches to modulate oxidation states in nanoporous metal oxides commonly lead to the breakdown of the nanoporous structure as well as involve concomitant changes in their morphology, pore size, surface area, and nanocrystalline size. Herein, we present a transformative route to nanoporous metal oxides with various oxidation states using manganese oxides as model systems. Thermal conversion of Mn-based metal-organic frameworks (Mn-MOFs) at controlled temperature and atmosphere yielded a series of nanoporous manganese oxides with continuously tuned oxidation states: MnO, Mn3O 4, Mn5O8, and Mn2O3. This transformation enabled the preparation of low-oxidation phase MnO and metastable intermediate phase Mn5O8 with nanoporous architectures, which were previously rarely accessible. Significantly, nanoporous MnO, Mn3O4, and Mn5O8 had a very similar morphology, surface area, and crystalline size. We investigated the electrocatalytic activity of nanoporous manganese oxides for oxygen reduction reaction (ORR) to identify the role of oxidation states, and observed oxidation state-dependent activity and kinetics for the ORR.close5