Experimental methods in chemical engineering: X ‐ray absorption spectroscopy— XAS , XANES , EXAFS

Although X-ray absorption spectroscopy (XAS) was conceived in the early 20th century, it took 60 years after the advent of synchrotrons for researchers to exploit its tremendous potential. Counterintuitively, researchers are now developing bench type polychromatic X-ray sources that are less brilliant to measure catalyst stability and work with toxic substances. XAS measures the absorption spectra of electrons that X-rays eject from the tightly bound core electrons to the continuum. The spectrum from 10 to 150 eV (kinetic energy of the photoelectrons) above the chemical potential—binding energy of core electrons—identifies oxidation state and band occupancy (X-ray absorption near edge structure, XANES), while higher energies in the spectrum relate to local atomic structure like coordination number and distance, Debye-Waller factor, and inner potential correction (extended X-ray absorption fine structure, EXAFS). Combining XAS with complementary spectroscopic techniques like Raman, Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR) elucidates the nature of the chemical bonds at the catalyst surface to better understand reaction mechanisms and intermediates. Because synchrotrons continue to be the light source of choice for most researchers, the number of articles Web of Science indexes per year has grown from 1000 in 1991 to 1700 in 2020. Material scientists and physical chemists publish an order of magnitude articles more than chemical engineers. Based on a bibliometric analysis, the research comprises five clusters centred around: electronic and optical properties, oxidation and hydrogenation catalysis, complementary analytical techniques like FTIR, nanoparticles and electrocatalysis, and iron, metals, and complexes

Experimental methods in chemical engineering: X-rayabsorption spectroscopy—XAS, XANES, EXAFS

Although X-ray absorption spectroscopy (XAS) was conceived in the early 20th century, it took 60 years after the advent of synchrotrons for researchers to exploit its tremendous potential. Counterintuitively, researchers are now developing bench type polychromatic X-ray sources that are less brilliant to measure catalyst stability and work with toxic substances. XAS measures the absorption spectra of electrons that X-rays eject from the tightly bound core electrons to the continuum. The spectrum from 10 to 150 eV (kinetic energy of the photoelectrons) above the chemical potential—binding energy of core electrons—identifies oxidation state and band occupancy (X-ray absorption near edge structure, XANES), while higher energies in the spectrum relate to local atomic structure like coordination number and distance, Debye-Waller factor, and inner potential correction (extended X-ray absorption fine structure, EXAFS). Combining XAS with complementary spectroscopic techniques like Raman, Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR) elucidates the nature of the chemical bonds at the catalyst surface to better understand reaction mechanisms and intermediates. Because synchrotrons continue to be the light source of choice for most researchers, the number of articles Web of Science indexes per year has grown from 1000 in 1991 to 1700 in 2020. Material scientists and physical chemists publish an order of magnitude articles more than chemical engineers. Based on a bibliometric analysis, the research comprises five clusters centred around: electronic and optical properties, oxidation and hydrogenation catalysis, complementary analytical techniques like FTIR, nanoparticles and electrocatalysis, and iron, metals, and complexes.The authors acknowledge travel support from the Eras-mus+KA107 (2018-1-ES01-KA107-049563) and funding for the open access charge from the Universidad deMÁlaga/CBUA. This work was undertaken, in part,thanks to funding from the Canada Research Chairs pro-gram (950-231476)

Supported molybdenum carbide for higher alcohol synthesis from syngas

Molybdenum carbide supported on active carbon, carbon nanotubes, and titanium dioxide, and promoted by K2CO3, has been prepared and tested for methanol and higher alcohol synthesis from syngas. At optimal conditions, the activity and selectivity to alcohols (methanol and higher alcohols) over supported molybdenum carbide are significantly higher compared to the bulk carbide. The CO conversion reaches a maximum, when about 20 wt% Mo2C is loaded on active carbon. The selectivity to higher alcohols increases with increasing Mo2C loading on active carbon and reaches a maximum over bulk molybdenum carbide, while the selectivity to methanol follows the opposite trend. The effect of Mo2C loading on the alcohol selectivity at a fixed K/Mo molar ratio of 0.14 could be related to the amount of K2CO3 actually on the active Mo2C phase and the size, structure and composition of the supported carbide clusters. Unpromoted, active carbon supported Mo2C exhibits a high activity for CO conversion with hydrocarbons as the dominant products. The K 2CO3 promoter plays an essential role in directing the selectivity to alcohols rather than to hydrocarbons. The optimum selectivity toward higher alcohols and total alcohols is obtained at a K/Mo molar ratio of 0.21 over the active carbon supported Mo2C (20 wt%)

It is time to define an organizational model for the prevention and management of infections along the surgical pathway : a worldwide cross-sectional survey

Background The objectives of the study were to investigate the organizational characteristics of acute care facilities worldwide in preventing and managing infections in surgery; assess participants' perception regarding infection prevention and control (IPC) measures, antibiotic prescribing practices, and source control; describe awareness about the global burden of antimicrobial resistance (AMR) and IPC measures; and determine the role of the Coronavirus Disease 2019 pandemic on said awareness. Methods A cross-sectional web-based survey was conducted contacting 1432 health care workers (HCWs) belonging to a mailing list provided by the Global Alliance for Infections in Surgery. The self-administered questionnaire was developed by a multidisciplinary team. The survey was open from May 22, 2021, and June 22, 2021. Three reminders were sent, after 7, 14, and 21 days. Results Three hundred four respondents from 72 countries returned a questionnaire, with an overall response rate of 21.2%. Respectively, 90.4% and 68.8% of participants stated their hospital had a multidisciplinary IPC team or a multidisciplinary antimicrobial stewardship team. Local protocols for antimicrobial therapy of surgical infections and protocols for surgical antibiotic prophylaxis were present in 76.6% and 90.8% of hospitals, respectively. In 23.4% and 24.0% of hospitals no surveillance systems for surgical site infections and no monitoring systems of used antimicrobials were implemented. Patient and family involvement in IPC management was considered to be slightly or not important in their hospital by the majority of respondents (65.1%). Awareness of the global burden of AMR among HCWs was considered very important or important by 54.6% of participants. The COVID-19 pandemic was considered by 80.3% of respondents as a very important or important factor in raising HCWs awareness of the IPC programs in their hospital. Based on the survey results, the authors developed 15 statements for several questions regarding the prevention and management of infections in surgery. The statements may be the starting point for designing future evidence-based recommendations. Conclusion Adequacy of prevention and management of infections in acute care facilities depends on HCWs behaviours and on the organizational characteristics of acute health care facilities to support best practices and promote behavioural change. Patient involvement in the implementation of IPC is still little considered. A debate on how operationalising a fundamental change to IPC, from being solely the HCWs responsibility to one that involves a collaborative relationship between HCWs and patients, should be opened.Peer reviewe