232 research outputs found
The effects of space radiation on thin films of YBa2Cu3O(sub 7-x)
This investigation had two objectives: (1) to determine the effects of space radiation on superconductor parameters that are most important in space applications; and (2) to determine whether this effect can be simulated with Co-60 gamma rays, the standard test method for space materials. Thin films of yttrium barium copper oxide (YBCO) were formed by coevaporation of Y, BaF2, and Cu and post-annealing in wet oxygen at 850 C for 3.5 h. The substrate used was (100) silicon with an evaporated zirconia buffer layer. The samples were characterized by four point probe electrical measurements as a function of temperature. The parameters measured were the zero resistance transition temperature (T sub c) and the room temperature resistance. The samples were then exposed to Co-60 gamma-rays in air and in pure nitrogen, and to 780 keV electrons, in air. The parameters were then remeasured. The results are summarized. The results indicate little or no degradation in the parameters measured for samples exposed up to 10 Mrads of gamma-rays in nitrogen. However, complete degradation of samples exposed to 10-Mrad in air was observed. This degradation is preliminarily attributed to the high level of ozone generated in the chamber by the gamma-ray interaction with air. It can be concluded that: (1) the electron component of space radiation does not degrade the critical temperature of the YBCO films described, at least for energies around 800 keV and doses similar to those received by surface materials on spacecraft in typical remote sensing missions; and (2) for qualifying this and other superconducting materials against the space-radiation threat the standard test method in the aerospace industry, namely, exposure to Co-60 gamma-rays in air, may require some further investigation. As a minimum, the sample must be either in vacuum or in positive nitrogen pressure
The effects of space radiation on thin films of YBa2Cu3O(7-x)
This investigation had two objectives: (1) to determine the effects of space radiation on superconductor parameters that are most important in space applications; and (2) to determine whether this effect can be simulated with Co-60 gamma rays, the standard test method for space materials. Thin films of yttrium barium copper oxide (YBCO) were formed by coevaporation of Y, BaF2, and Cu and post-annealing in wet oxygen at 850 C for 3.5 h. The substrate used was (100) silicon with an evaporated zirconia buffer layer. The samples were characterized by four point probe electrical measurements as a function of temperature. The parameters measured were the zero resistance transition temperature T(sub c) and the room temperature resistance. The samples were then exposed to Co-60 gamma-rays in air and in pure nitrogen, and to 780 keV electrons, in air. The parameters were then remeasured. The results are summarized. The results indicate little or no degradation in the parameters measured for samples exposed up to 10 Mrads of gamma-rays in nitrogen. However, complete degradation is preliminarily attributed to the high level of ozone generated in the chamber by the gamma-ray interaction with air. It can be concluded that: (1) the electron component of space radiation does not degrade the critical temperature of the YBCO films described, at least for energies around 800 keV and doses similar to those received by surface materials on spacecraft in typical remote sensing missions; and (2) for qualifying this and other superconducting materials against the space-radiation threat the standard test method used in the aerospace industry, namely, exposure to Co-60 gamma-rays in air, may require some further investigation. As a minimum, the sample must be either in vacuum or in positive nitrogen pressure
A Classification of Countable Lower 1-transitive Linear Orders
This paper contains a classification of countable lower 1-transitive linear orders. This is the first step in the classification of countable 1-transitive trees given in Chicot and Truss (2009): the notion of lower 1-transitivity generalises that of 1-transitivity for linear orders, and it is essential for the structure theory of 1-transitive trees. The classification is given in terms of coding trees, which describe how a linear order is fabricated from simpler pieces using concatenations, lexicographic products and other kinds of construction. We define coding trees and show that a coding tree can be constructed from a lower 1-transitive linear order (X,≤) by examining all the invariant partitions on X. Then we show that a lower 1-transitive linear order can be recovered from a coding tree up to isomorphism
Countable, 1-transitive, coloured linear orderings I
AbstractWe give a classification of all the countable, 1-transitive, coloured linear orderings for countable colour sets. This is a generalization of Morel's classification of the countable, 1-transitive linear orderings. For finite colour sets, there are ℵ1 examples and for countably infinite colour sets, there are 2ℵ0 (discussed in more detail in a subsequent paper (countable, 1-transitive, coloured linear orderings II, submitted)). We also include a classification of the countable homogeneous coloured linear orders
New challenges in microalgae biotechnology
Photosynthetic protists, also called microalgae, have been systematically studied for more than a century. However, only recently broad biotechnological applications have fostered a novel wave of research on their potentialities as sustainable resources of renewable energy as well as valuable industrial and agro-food products. At the recent VII European Congress of Protistology held in Seville, three outstanding examples of different research strategies on microalgae with biotechnological implications were presented, which suggested that integrative approaches will produce very significant advances in this field in the next future. In any case, intense research and the application of systems biology and genetic engineering techniques are absolutely essential to reach the full potential of microalgae as cell-factories of bio-based products and, therefore, could contribute significantly to solve the problems of biosustainability and energy shortage
The effect of temperature cycling typical of low earth orbit satellites on thin films of YBa2Cu3O(7-x)
The refrigeration of superconductors in space poses a challenging problem. The problem could be less severe if superconducting materials would not have to be cooled when not in use. Thin films of the YBa2Cu3O(7-x) (YBCO) superconductor were subjected to thermal cycling, which was carried out to simulate a large number of eclipses of a low earth orbit satellite. Electrical measurements were performed to find the effect of the temperature cycling. Thin films of YBCO were formed by coevaporation of Y, BaF2, and Cu and postannealing in wet oxygen at 850 C for 3.5 h. The substrates used were (100) SrTiO3, polycrystalline alumina, and oxidized silicon; the last two have an evaporated zirconia layer. Processing and microstructure studies of these types of films have been published. THe zero resistance transition temperatures of the samples used in this study were 91, 82, and 86 K, respectively. The samples were characterized by four point probe electrical measurements as a function of temperature. The parameters measured were: the zero resistance transition temperature, the 10 to 90 percent transition width, and the room temperature resistance, normalized to that measured before temperature cycling. The results for two samples are presented. Each sample had a cumulative exposure. Cycling in atmospheric pressure nitrogen was performed at a rate of about 60 cycles per day, whereas in vacuum the rate was only about 10 cycles per day. The results indicate only little or no changes in the parameters measured. Degradation of superconducting thin films of YBCO has been reported due to storage in nitrogen. It is believed that the relatively good performance of films after temperature cycling is related to the fact that BaF2 was used as an evaporation source. The latest result on extended temperature cycling indicates significant degradation. Further tests of extended cycling will be carried out to provide additional data and to clarify this preliminary finding
A Multiscale Modeling Framework Based on P Systems
Cellular systems present a highly complex organization at
different scales including the molecular, cellular and colony levels. The
complexity at each one of these levels is tightly interrelated. Integrative
systems biology aims to obtain a deeper understanding of cellular systems
by focusing on the systemic and systematic integration of the different
levels of organization in cellular systems.
The different approaches in cellular modeling within systems biology
have been classified into mathematical and computational frameworks.
Specifically, the methodology to develop computational models has been
recently called executable biology since it produces executable algorithms
whose computations resemble the evolution of cellular systems.
In this work we present P systems as a multiscale modeling framework
within executable biology. P system models explicitly specify the
molecular, cellular and colony levels in cellular systems in a relevant and
understandable manner. Molecular species and their structure are represented
by objects or strings, compartmentalization is described using
membrane structures and finally cellular colonies and tissues are modeled
as a collection of interacting individual P systems.
The interactions between the components of cellular systems are described
using rewriting rules. These rules can in turn be grouped together
into modules to characterize specific cellular processes. One of our current
research lines focuses on the design of cell systems biology models
exhibiting a prefixed behavior through the automatic assembly of these
cellular modules. Our approach is equally applicable to synthetic as well
as systems biology.Kingdom's Engineering and Physical Sciences Research Council EP/ E017215/1Biotechnology and Biological Sciences Research Council/United Kingdom BB/F01855X/1Biotechnology and Biological Sciences Research Council/United Kingdom BB/D019613/
Rating the incidence of iatrogenic vascular injuries in thoracic and lumbar spine surgery as regards the approach: A PRISMA-based literature review
Purpose: To assess the rate, timing of diagnosis, and repairing strategies of vascular injuries in thoracic and lumbar spine surgery as their relationship to the approach. Methods: PubMed, Medline, and Embase databases were utilized for a comprehensive literature search based on keywords and mesh terms to find articles reporting iatrogenic vascular injury during thoracic and lumbar spine surgery. English articles published in the last ten years were selected. The search was refined based on best match and relevance. Results: Fifty-six articles were eligible, for a cumulative volume of 261 lesions. Vascular injuries occurred in 82% of instrumented procedures and in 59% during anterior approaches. The common iliac vein (CIV) was the most involved vessel, injured in 49% of anterior lumbar approaches. Common iliac artery, CIV, and aorta were affected in 40%, 28%, and 28% of posterior approaches, respectively. Segmental arteries were injured in 68% of lateral approaches. Direct vessel laceration occurred in 81% of cases and recognized intraoperatively in 39% of cases. Conclusions: Incidence of iatrogenic vascular injuries during thoracic and lumbar spine surgery is low but associated with an overall mortality rate up to 65%, of which less than 1% for anterior approaches and more than 50% for posterior ones. Anterior approaches for instrumented procedures are at risk of direct avulsion of CIV. Posterior instrumented fusions are at risk for injuries of iliac vessels and aorta. Lateral routes are frequently associated with lesions of segmental vessels. Suture repair and endovascular techniques are useful in the management of these severe complications
Listeriosis en bovinos de la Provincia de Buenos Aires, Argentina
Se realizó un estudio retrospectivo de casos de listeriosis bovina ocurridos en diferentes partidos de Provincia de Buenos Aires (Argentina). Se utilizaron las técnicas diagnósticas de histopatología, bacteriología e inmunohistoquímica. De 17 casos confirmados por esta última técnica, en 7 de ellos se dispuso de material para el cultivo bacteriológico y solo en 3 casos se pudo aislar Listeria monocytogenes. El 64,7% de los casos de listeriosis se presentaron en rodeos que consumían ensilado de maíz. La enfermedad se diagnosticó con mayor frecuencia en sistemas de producción intensivos (feedlot y tambos). Cuatro casos negativos al cultivo de L. monocytogenes se lograron confirmar por inmunohistoquímica, por lo cual esta técnica se revela valiosa dado que su empleo mejora la eficiencia diagnóstica de los casos de listeriosis bovina
Humoral and cellular immune response and transplacental transmission in cows experimentally infected with Neospora caninum NC-6 Argentina strain
La infección por Neospora caninum es una importante causa de aborto en los bovinos. El objetivo de este estudio fue evaluar la respuesta inmune humoral y celular en bovinos y la posibilidad de transmisión transplacentaria durante una infección experimental con la cepa de N. caninum NC-6 Argentina. Se inocularon vacas preñadas de 65 días de gestación seropositivas (SP) y seronegativas (SN) a N. caninum por vía intravenosa con 108 taquizoítos de la cepa NC-6 o con PBS como control negativo.Facultad de Ciencias VeterinariasInstituto Nacional de Tecnología Agropecuari
- …