Development of Edgeless n-on-p Planar Pixel Sensors for future ATLAS Upgrades

The development of n-on-p "edgeless" planar pixel sensors being fabricated at FBK (Trento, Italy), aimed at the upgrade of the ATLAS Inner Detector for the High Luminosity phase of the Large Hadron Collider (HL-LHC), is reported. A characterizing feature of the devices is the reduced dead area at the edge, achieved by adopting the "active edge" technology, based on a deep etched trench, suitably doped to make an ohmic contact to the substrate. The project is presented, along with the active edge process, the sensor design for this first n-on-p production and a selection of simulation results, including the expected charge collection efficiency after radiation fluence of $1 \times 10^{15} {\rm n_{eq}}/{\rm cm}^2$ comparable to those expected at HL-LHC (about ten years of running, with an integrated luminosity of 3000 fb$^{-1}$) for the outer pixel layers. We show that, after irradiation and at a bias voltage of 500 V, more than 50% of the signal should be collected in the edge region; this confirms the validity of the active edge approach.Comment: 20 pages, 9 figures, submitted to Nucl. Instr. and Meth.

Electrical Characterization of a Thin Edgeless N-on-p Planar Pixel Sensors For ATLAS Upgrades

In view of the LHC upgrade phases towards the High Luminosity LHC (HL-LHC), the ATLAS experiment plans to upgrade the Inner Detector with an all-silicon system. Because of its radiation hardness and cost effectiveness, the n-on-p silicon technology is a promising candidate for a large area pixel detector. The paper reports on the joint development, by LPNHE and FBK of novel n-on-p edgeless planar pixel sensors, making use of the active trench concept for the reduction of the dead area at the periphery of the device. After discussing the sensor technology, and presenting some sensors' simulation results, a complete overview of the electrical characterization of the produced devices will be given.Comment: 9 pages, 9 figures, to appear in the proceedings of the 15th International Workshops on Radiation Imaging Detector

Novel Silicon n-on-p Edgeless Planar Pixel Sensors for the ATLAS upgrade

In view of the LHC upgrade phases towards HL-LHC, the ATLAS experiment plans to upgrade the Inner Detector with an all-silicon system. The n-on-p silicon technology is a promising candidate for the pixel upgrade thanks to its radiation hardness and cost effectiveness, that allow for enlarging the area instrumented with pixel detectors. We report on the development of novel n-in-p edgeless planar pixel sensors fabricated at FBK (Trento, Italy), making use of the "active edge" concept for the reduction of the dead area at the periphery of the device. After discussing the sensor technology and fabrication process, we present device simulations (pre- and post-irradiation) performed for different sensor configurations. First preliminary results obtained with the test-structures of the production are shown.Comment: 6 pages, 5 figures, to appear in the proceedings of the 9th International Conference on Radiation Effects on Semiconductor Materials Detectors and Device

Performance of Irradiated Thin Edgeless N-on-P Planar Pixel Sensors for ATLAS Upgrades

In view of the LHC upgrade phases towards the High Luminosity LHC (HL-LHC), the ATLAS experiment plans to upgrade the Inner Detector with an all-silicon system. Because of its radiation hardness and cost effectiveness, the n-on-p silicon technology is a promising candidate for a large area pixel detector. The paper reports on the joint development, by LPNHE and FBK of novel n-on-p edgeless planar pixel sensors, making use of the active trench concept for the reduction of the dead area at the periphery of the device. After discussing the sensor technology, a complete overview of the electrical characterization of several irradiated samples will be discussed. Some comments about detector modules being assembled will be made and eventually some plans will be outlined.Comment: 6 pages, 13 figures, to appear in the proceedings of the 2013 Nuclear Science Symposium and Medical Imaging Conference. arXiv admin note: text overlap with arXiv:1311.162

Seismic assessment of masonry cross vaults through non-linear static analyses

Masonry cross vaults are common structural elements in historical buildings. They are largely diffused in all European countries, including those characterized by higher levels of seismicity. Although they have been constructed for centuries, they represent some of the most vulnerable elements of traditional architecture, especially with reference to horizontal loads. The understanding of their behaviour under seismic loading and the definition of their safety are crucial aspects for the accurate assessment of the global health conditions of historical buildings. In the present work, masonry cross vaults are analysed through the Finite Element Method (FEM) and static non-linear analyses are performed considering the effect of different brick pattern. A simplified micro-modelling approach is adopted for the generation of the FEM models and two different brick arrangements are considered, i.e., radial bricks and diagonal bricks, which are the most widespread in European cross vaults. Static non-linear analyses are performed by monotonically incrementing a lateral acceleration until collapse. Results are analysed in terms of maximum load factor, crack pattern and damage mechanisms. The analysis of the results shows that the masonry apparatus strongly influences the vault seismic response both in terms of stiffness and ductility as well as in terms of global capacity

Seismic behaviour of cross vaults with different brick pattern

Cross masonry vaults are common structural elements in historical buildings. They are largely diffused in all European countries, including those characterized by higher levels of seismicity. Although they have been constructed for centuries, they represent some of the most vulnerable elements of traditional architecture, especially with reference to horizontal loads. The understanding of their structural behaviour under seismic loading is a crucial aspect for the accurate assessment of the safety of historical buildings. In the present work, the seismic response of cross masonry vaults is analysed through the Finite Element Method (FEM) and static non-linear analyses considering the effect of different brick patterns and boundary conditions. A simplified micro-modelling approach is adopted for the generation of the FEM models and two different brick arrangements are considered, i.e., radial bricks and diagonal bricks, which are the most widespread in European cross vaults. Two different boundary conditions are assumed in order to simulate a vault with and without lateral confinement. Static non-linear analyses are performed by monotonically incrementing a lateral acceleration until collapse. Results are analysed in terms of maximum load factor, stiffness, ductility, crack pattern and damage mechanisms. The analysis of the results shows that not only boundary conditions, but also the brick pattern strongly influences the vault seismic response both in terms of stiffness and ductility as well as in terms of global capacity

A Framework to Use Public-Private Partnership for Smart City Projects

The concept of Smart City has been emerging as a strategic set of integrated initiatives encompassing infrastructures, technology and digital services for the purpose of enhancing the quality of life of citizens. However, the development and implementation of Smart City projects require considerable investments that are difficult to fund with traditional public finance. In this context, Public-Private-Partnerships (PPP) appear to be suitable solutions to overcome the shortage of public finance and cuts on public spending. However, the adoption of PPP forms for Smart City projects has not been fully explored and only experimentally applied so far. In order to promote the usage of PPP to finance Smart City initiatives, this paper proposes some PPP financial instruments and discusses the associated strengths and weaknesses. In particular, the use of Project Finance, Revenue Sharing and Social Impact Bonds are suggested as sound alternatives and suitable sources of financing for Smart City projects

Design of the traction battery for a Formula SAE racing car

This paper describes the design of the traction battery for the new electric Formula SAE vehicle of the University of Pisa. A model based design methodology extended to the mechanical, electrical and thermal domains was applied to find the best trade-off between the battery weight and the maximum power available at the wheel. The designed battery configuration was validated by means of electrical and thermal simulations

Slow-Moving Landslide Damage Assessment of Historic Masonry Churches: Some Case-Studies in Italy

This paper presents a contribution for the damage assessment of historic masonry churches exposed to slow-moving landslides. In particular, the authors identified four global damage mechanisms, which are presented here by means of the critical damage assessment of four case studies located in the Liguria region (Italy) in areas affected by slow-moving landslides. For each church, a correlation between the damage patterns observed on-site and the ground movements induced by landslide phenomena was sought by means of visual inspections and crack interpretation. As a result, each damage mechanism was associated to a different pattern of ground movements produced by slow-moving landslides