The DNA damage checkpoint pathway promotes extensive resection and nucleotide synthesis to facilitate homologous recombination repair and genome stability in fission yeast.

DNA double-strand breaks (DSBs) can cause chromosomal rearrangements and extensive loss of heterozygosity (LOH), hallmarks of cancer cells. Yet, how such events are normally suppressed is unclear. Here we identify roles for the DNA damage checkpoint pathway in facilitating homologous recombination (HR) repair and suppressing extensive LOH and chromosomal rearrangements in response to a DSB. Accordingly, deletion of Rad3(ATR), Rad26ATRIP, Crb2(53BP1) or Cdc25 overexpression leads to reduced HR and increased break-induced chromosome loss and rearrangements. We find the DNA damage checkpoint pathway facilitates HR, in part, by promoting break-induced Cdt2-dependent nucleotide synthesis. We also identify additional roles for Rad17, the 9-1-1 complex and Chk1 activation in facilitating break-induced extensive resection and chromosome loss, thereby suppressing extensive LOH. Loss of Rad17 or the 9-1-1 complex results in a striking increase in break-induced isochromosome formation and very low levels of chromosome loss, suggesting the 9-1-1 complex acts as a nuclease processivity factor to facilitate extensive resection. Further, our data suggest redundant roles for Rad3ATR and Exo1 in facilitating extensive resection. We propose that the DNA damage checkpoint pathway coordinates resection and nucleotide synthesis, thereby promoting efficient HR repair and genome stability

Influence of Additive Manufactured Scaffold Architecture on the Distribution of Surface Strains and Fluid Flow Shear Stresses and Expected Osteochondral Cell Differentiation

Scaffolds for regenerative medicine applications should instruct cells with the appropriate signals, including biophysical stimuli such as stress and strain, to form the desired tissue. Apart from that, scaffolds, especially for load-bearing applications, should be capable of providing mechanical stability. Since both scaffold strength and stress–strain distributions throughout the scaffold depend on the scaffold’s internal architecture, it is important to understand how changes in architecture influence these parameters. In this study, four scaffold designs with different architectures were produced using additive manufacturing. The designs varied in fiber orientation, while fiber diameter, spacing, and layer height remained constant. Based on micro-CT (μCT) scans, finite element models (FEMs) were derived for finite element analysis (FEA) and computational fluid dynamics (CFD). FEA of scaffold compression was validated using μCT scan data of compressed scaffolds. Results of the FEA and CFD showed a significant impact of scaffold architecture on fluid shear stress and mechanical strain distribution. The average fluid shear stress ranged from 3.6 mPa for a 0/90 architecture to 6.8 mPa for a 0/90 offset architecture, and the surface shear strain from 0.0096 for a 0/90 offset architecture to 0.0214 for a 0/90 architecture. This subsequently resulted in variations of the predicted cell differentiation stimulus values on the scaffold surface. Fluid shear stress was mainly influenced by pore shape and size, while mechanical strain distribution depended mainly on the presence or absence of supportive columns in the scaffold architecture. Together, these results corroborate that scaffold architecture can be exploited to design scaffolds with regions that guide specific tissue development under compression and perfusion. In conjunction with optimization of stimulation regimes during bioreactor cultures, scaffold architecture optimization can be used to improve scaffold design for tissue engineering purposes

Assessing the Health of Richibucto Estuary with the Latent Health Factor Index

The ability to quantitatively assess the health of an ecosystem is often of great interest to those tasked with monitoring and conserving ecosystems. For decades, research in this area has relied upon multimetric indices of various forms. Although indices may be numbers, many are constructed based on procedures that are highly qualitative in nature, thus limiting the quantitative rigour of the practical interpretations made from these indices. The statistical modelling approach to construct the latent health factor index (LHFI) was recently developed to express ecological data, collected to construct conventional multimetric health indices, in a rigorous quantitative model that integrates qualitative features of ecosystem health and preconceived ecological relationships among such features. This hierarchical modelling approach allows (a) statistical inference of health for observed sites and (b) prediction of health for unobserved sites, all accompanied by formal uncertainty statements. Thus far, the LHFI approach has been demonstrated and validated on freshwater ecosystems. The goal of this paper is to adapt this approach to modelling estuarine ecosystem health, particularly that of the previously unassessed system in Richibucto in New Brunswick, Canada. Field data correspond to biotic health metrics that constitute the AZTI marine biotic index (AMBI) and abiotic predictors preconceived to influence biota. We also briefly discuss related LHFI research involving additional metrics that form the infaunal trophic index (ITI). Our paper is the first to construct a scientifically sensible model to rigorously identify the collective explanatory capacity of salinity, distance downstream, channel depth, and silt-clay content --- all regarded a priori as qualitatively important abiotic drivers --- towards site health in the Richibucto ecosystem.Comment: On 2013-05-01, a revised version of this article was accepted for publication in PLoS One. See Journal reference and DOI belo

International lease accounting reform and economic consequences: the views of UK users and preparers

In response to perceived difficulties with extant lease-accounting standards in operation worldwide, the G4+1 issued a discussion paper which proposes that all leases should be recognized on the balance sheet [ASB (1999). Leases: Implementation of a new approach, discussion paper. London: Accounting Standards Board]. Leasing is now on the active agenda of the IASB. A major difficulty faced by standard setters lies in overcoming the preparer/user lobbying imbalance and obtaining ex ante evidence on the likely impact of regulatory reform. This paper contributes to the ongoing international debate by conducting a questionnaire survey of U.K. users and preparers to assess their views on proposals for lease-accounting reform and on the potential economic consequences of their adoption. The results, based on 132 responses, indicate that both groups accept that there are deficiencies in the current rules, but they do not agree on the way forward and believe that the proposals would lead to significant economic consequences for key parties. The impact on respondents' views of familiarity with the proposals, level of lease usage, and company size, is also examined

Turnover rates of nitrogen stable isotopes in the salt marsh mummichog, Fundulus heteroclitus, following a laboratory diet switch

Author Posting. © The Authors, 2005. This is the author's version of the work. It is posted here by permission of Springer-Verlag GmbH for personal use, not for redistribution. The definitive version was published in Oecologia 147 (2006): 391-395, doi:10.1007/s00442-005-0277-z.Nitrogen stable isotopes are frequently used in ecological studies to estimate trophic position and determine movement patterns. Knowledge of tissue-specific turnover and nitrogen discrimination for the study organisms is important for accurate interpretation of isotopic data. We measured δ15 N turnover in liver and muscle tissue in juvenile mummichogs, Fundulus heteroclitus, following a laboratory diet switch. Liver tissue turned over significantly faster than muscle tissue suggesting the potential for a multiple tissue stable isotope approach to study movement and trophic position over different time scales; metabolism contributed significantly to isotopic turnover for both liver and muscle. Nitrogen diet-tissue discrimination was estimated at between 0.0 and 1.2‰ for liver and –1.0 and 0.2‰ for muscle. This is the first experiment to demonstrate a significant variation in δ15 N turnover between liver and muscle tissues in a fish species.This study was funded by NSF LTER grant OCE-9726921

The impact of mental health recovery narratives on recipients experiencing mental health problems: Qualitative analysis and change model.

BACKGROUND: Mental health recovery narratives are stories of recovery from mental health problems. Narratives may impact in helpful and harmful ways on those who receive them. The objective of this paper is to develop a change model identifying the range of possible impacts and how they occur. METHOD: Semi-structured interviews were conducted with adults with experience of mental health problems and recovery (n = 77). Participants were asked to share a mental health recovery narrative and to describe the impact of other people's recovery narratives on their own recovery. A change model was generated through iterative thematic analysis of transcripts. RESULTS: Change is initiated when a recipient develops a connection to a narrator or to the events descripted in their narrative. Change is mediated by the recipient recognising experiences shared with the narrator, noticing the achievements or difficulties of the narrator, learning how recovery happens, or experiencing emotional release. Helpful outcomes of receiving recovery narratives are connectedness, validation, hope, empowerment, appreciation, reference shift and stigma reduction. Harmful outcomes are a sense of inadequacy, disconnection, pessimism and burden. Impact is positively moderated by the perceived authenticity of the narrative, and can be reduced if the recipient is experiencing a crisis. CONCLUSIONS: Interventions that incorporate the use of recovery narratives, such as peer support, anti-stigma campaigns and bibliotherapy, can use the change model to maximise benefit and minimise harms from narratives. Interventions should incorporate a diverse range of narratives available through different mediums to enable a range of recipients to connect with and benefit from this material. Service providers using recovery narratives should preserve authenticity so as to maximise impact, for example by avoiding excessive editing

Geographical inequalities in lung cancer management and survival in South East England: evidence of variation in access to oncology services?

This study aimed to determine whether the management and survival of patients with lung cancer varied among 26 health authorities in South East England. The Thames Cancer Registry identified patients diagnosed with lung cancer (ICD-10 codes C33-C34) between 1995 and 1999. After excluding death certificate only patients, 32,818 (81%) patients were analysed. The proportions of patients receiving active treatment varied among health authorities between 5 and 17% for non-investigative surgery, 4 and 17% for any chemotherapy, 8 and 30% for any radiotherapy and 15 and 42% for any active treatment. One-year patient survival ranged from 11 to 34%. There was evidence of health authority level variation even after adjusting for case mix. Patients whose first hospital attendance was at a radiotherapy centre were more likely to receive active treatment (OR 1.72, 95% CI 1.21-2.46), chemotherapy (1.38, 1.06-1.79) or radiotherapy (1.86, 1.28-2.71). There was some evidence that patients whose first hospital attendance was at a radiotherapy centre survived longer. This study shows there is geographical inequality in the treatment given to lung cancer patients and patient survival in South East England. There was some evidence to suggest that these inequalities might be explained by variations in access to oncology services. Future studies should investigate the pathways and barriers to specialist care in this condition

Directed Self-Assembly: Expectations and Achievements

Nanotechnology has been a revolutionary thrust in recent years of development of science and technology for its broad appeal for employing a novel idea for relevant technological applications in particular and for mass-scale production and marketing as common man commodity in general. An interesting aspect of this emergent technology is that it involves scientific research community and relevant industries alike. Top–down and bottom–up approaches are two broad division of production of nanoscale materials in general. However, both the approaches have their own limits as far as large-scale production and cost involved are concerned. Therefore, novel new techniques are desired to be developed to optimize production and cost. Directed self-assembly seems to be a promising technique in this regard; which can work as a bridge between the top–down and bottom–up approaches. This article reviews how directed self-assembly as a technique has grown up and outlines its future prospects

Corporate reputation in the spanish context: An interaction between reporting to stakeholders and industry.

ABSTRACT: The authors describe the intensity and orientation of the corporate social responsibility (CSR) reporting in four Spanish industries and explore the relationship that exists between both concepts and an independent measurement of reputation for CSR (CSRR). The results demonstrate that the CSR reporting is especially relevant and useful in the finance industry. Finance companies report significantly more CSR information than most industries in Spain, and this reporting is more closely linked to their CSRR than the CSR reporting of basic, consumer goods and services industries. Borra