56 research outputs found
5′-CMP stimulates phospholipase A-mediated hydrolysis of phosphatidylinositol in permeabilized pituitary GH3 cells
Metal-Support Cooperative Effects in Au/VPO for the Aerobic Oxidation of Benzyl Alcohol to Benzyl Benzoate
This paper studies the cooperative effect of Au nanoparticles deposited on vanadyl pyrophosphate oxide (VPO) in the liquid phase oxidation of benzyl alcohol. VPO was prepared using the classical method by thermally treating VOHPO4 center dot 0.5H(2)O precursor in reacting atmosphere at 420 degrees C for a period of 72 h. Au nanoparticles were deposited by incipient wetness method. The catalysts were characterized by means of XRD, TEM, XPS and Raman. The bulk VPO catalyst contains vanadyl pyrophosphate phase ((VO)(2)P2O7), and a small amount of VOPO4. The catalytic system exhibits a high activity in the base-free liquid phase oxidation of alcohols compared to Au on activated carbon, classic catalyst used for this type of reaction. Au/VPO showed a high peculiar selectivity to benzyl benzoate (76%), an important product used in the pharmaceutical and perfume industries. This behavior might be ascribed to the presence of strong acid sites of VPO, as determined by liquid phase titration. Stability tests performed on Au/VPO showed a deactivation of 10% after the first run, but a constant conversion along the following five cycles. This phenomenon can be attributed to the increase of mean Au particle size (from 19.1 to 23.4 nm) after recycling tests as well as the partial leaching of Au and V in the reaction media. Moreover, XRD evidenced a modification in the VPO structure with the partial formation of VOHPO4 center dot 0.5H(2)O phase
Dimerization of Translationally Controlled Tumor Protein Is Essential For Its Cytokine-Like Activity
BACKGROUND:Translationally Controlled Tumor Protein (TCTP) found in nasal lavage fluids of allergic patients was named IgE-dependent histamine-releasing factor (HRF). Human recombinant HRF (HrHRF) has been recently reported to be much less effective than HRF produced from activated mononuclear cells (HRFmn). METHODS AND FINDINGS:We found that only NH(2)-terminal truncated, but not C-terminal truncated, TCTP shows cytokine releasing activity compared to full-length TCTP. Interestingly, only NH(2)-terminal truncated TCTP, unlike full-length TCTP, forms dimers through intermolecular disulfide bonds. We tested the activity of dimerized full-length TCTP generated by fusing it to rabbit Fc region. The untruncated-full length protein (Fc-HrTCTP) was more active than HrTCTP in BEAS-2B cells, suggesting that dimerization of TCTP, rather than truncation, is essential for the activation of TCTP in allergic responses. We used confocal microscopy to evaluate the affinity of TCTPs to its putative receptor. We detected stronger fluorescence in the plasma membrane of BEAS-2B cells incubated with Del-N11TCTP than those incubated with rat recombinant TCTP (RrTCTP). Allergenic activity of Del-N11TCTP prompted us to see whether the NH(2)-terminal truncated TCTP can induce allergic airway inflammation in vivo. While RrTCTP had no influence on airway inflammation, Del-N11TCTP increased goblet cell hyperplasia in both lung and rhinal cavity. The dimerized protein was found in sera from allergic patients, and bronchoalveolar lavage fluids from airway inflamed mice. CONCLUSIONS:Dimerization of TCTP seems to be essential for its cytokine-like activity. Our study has potential to enhance the understanding of pathogenesis of allergic disease and provide a target for allergic drug development
Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries
Background
Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres.
Methods
This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries.
Results
In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia.
Conclusion
This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries
Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries
Abstract
Background
Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres.
Methods
This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries.
Results
In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia.
Conclusion
This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries
Glycerol oxidation using gold-containing catalysts
Glycerol is an important byproduct of biodiesel
production, and it is produced in significant amounts by
transesterification of triglycerides with methanol. Due to the
highly functionalized nature of glycerol, it is an important
biochemical that can be utilized as a platform chemical for the
production of high-added-value products. At present, research
groups in academia and industry are exploring potential direct
processes for the synthesis of useful potential chemicals using
catalytic processes. Over the last 10 years, there has been huge
development of potential catalytic processes using glycerol as the
platform chemical.
One of the most common processes investigated so far is the
catalytic oxidation of glycerol at mild conditions for the formation
of valuable oxygenated compounds used in the chemical and pharmaceutical industry. The major challenges associated with the
selective oxidation of glycerol are (i) the control of selectivity to the desired products, (ii) high activity and resistance to
poisoning, and (iii) minimizing the usage of alkaline conditions. To address these challenges, the most common catalysts used for
the oxidation of glycerol are based on supported metal nanoparticles. The first significant breakthrough was the successful
utilization of supported gold nanoparticles for improving the selectivity to specific products, and the second was the utilization of
supported bimetallic nanoparticles based on gold, palladium, and platinum for improving activity and controlling the selectivity to
the desired products. Moreover, the utilization of base-free reaction conditions for the catalytic oxidation of glycerol has unlocked
new pathways for the production of free-base products, which facilitates potential industrial application.
The advantages of using gold-based catalysts are the improvement of the catalyst lifetime, stability, and reusability, which are key
factors for potential commercialization. In this Account, we discuss the advantages of the using supported gold-based
nanoparticles, preparation methods for achieving highly active gold-based catalysts, and parameters such as particle size,
morphology of the bimetallic particle, and metal 12support interactions, which can influence activity and selectivity to the desire
Probiotic characterization of lactic acid bacteria isolated from infants feces and its application for the expression of green fluorescent protein
Effect of the preparation method of supported Au nanoparticles in the liquid phase oxidation of glycerol
Catalytically-active gold nanoparticles that are stable in aqueous solution have been prepared by sodium borohydride reduction of the respective metal salts in the presence of the stabilising polymer PVA (polyvinylalcohol). By controlling the ratio of the polymer to the metal, nanoparticles with different particle size and size distribution were synthesised. By varying the concentration of the gold and PVA/Au wt/wt ratio, well-defined nanoparticles with mean diameters from 3 to 5 nm could be fabricated. In general increasing the concentration of Au precursor, bigger particles size were obtained. Furthermore decreasing the amount of PVA, bigger particles were obtained, with the exception of the catalysts synthesized in presence of a large amount of PVA (PVA/Au = 2) wt/wt. Probably, in presence of an excess of protective agent, the immobilization of the Au nanoparticles onto the support is more difficult, leading to partial aggregation and coalescence of Au. In addition, the studies on the effect of heat pre-treatment revealed a higher resistance to aggregation of Au nanoparticles supported on titania than on activated carbon. A selected series of the synthesised supported materials were studied in the liquid phase oxidation of glycerol with the purpose of correlating catalytic activity and selectivity with particle size and metal choice. We demonstrated that by both particles size and amount of protective agent strongly influence the activity and selectivity
UV-vis-spectra of precursor compounds for Cu/ZnO catalysts and of the mineral reference compounds malachite and aurichalcite
- …