7,221 research outputs found
1.6 GHz VLBI Observations of SN 1979C: almost-free expansion
We report on 1.6 GHz Very-Long-Baseline-Interferometry (VLBI) observations of
supernova SN 1979C made on 18 November 2002. We derive a model-dependent
supernova size. We also present a reanalysis of VLBI observations made by us on
June 1999 and by other authors on February 2005. We conclude that, contrary to
our earlier claim of strong deceleration in the expansion, SN 1979C has been
undergoing almost-free expansion (; ) for over
25 years.Comment: 4 pages, 4 figures; submitted to A&A on 14 May 2009. Accepted on 7
Jul 200
Towards a better parametrisation of Skyrme-like effective forces: A critical study of the SkM force
Education Tax Credits: A Different Trajectory for Federal Funding of Higher Education and Remediation for Effectual Policymaking
Education tax credits provide federal financial aid to a wide expanse of American taxpayers; however, little research or analysis has been done on these costly programs. There has been little evidence of its link to college enrollment growth. This descriptive paper outlines the establishment of education tax credits, their original intent, and the lack of evidence of effectual federal policy over the past two decades. Thus, the purpose of this article is to assess how the federal government has reached an $18.9 billion annual expenditure for education tax credits with little to show in returns on investment. Further, this paper will provide recommendations needed to increase education tax policy efficacy. Since tax rewards reach more recipients than other forms of federal aid programs, they have the potential to increase college enrollment and educational attainment while providing liquidity-constrained individuals with greater incentive to enroll, persist, and graduate. If evaluated and remediated, education tax credits could positively affect the diversity of college populations, providing additional opportunities for desiring, potential students
Radio emission of SN1993J: the complete picture. I. Re-analysis of all the available VLBI data
We have performed a complete re-calibration and re-analysis of all the
available VLBI observations of supernova SN1993J, following an homogeneous and
well-defined methodology. Observations of SN1993J at 69 epochs, spanning 13
years, were performed by two teams, which used different strategies and
analysis tools. The results obtained by each group are similar, but their
conclusions on the supernova expansion and the shape and evolution of the
emitting region differ significantly. From our analysis of the combined set of
observations, we have obtained an expansion curve with unprecedented time
resolution and coverage. We find that the data from both teams are compatible
when analyzed with the same methodology. One expansion index () is enough to model the expansion observed at 1.7\,GHz, while two
expansion indices ( and ), separated
by a break time, days, are needed to model the data, at
frequencies higher than 1.7\,GHz, up to day 4000 after explosion. We thus
confirm the wavelength dependence of the size of the emitting region reported
by one of the groups. We also find that all sizes measured at epochs later than
day 4000 after explosion are systematically smaller than our model predictions.
We estimate the fractional shell width (, average of all epochs
and frequencies) and the level of opacity to the radio emission by the ejecta.
We find evidence of a spectral-index radial gradient in the supernova shell,
which is indicative of a frequency-dependent ejecta opacity. Finally, we study
the distribution and evolution of the azimuthal anisotropies (hot spots) found
around the radio shell during the expansion. These anisotropies have
intensities of % of the mean flux density of the shell, and appear to
systematically evolve during the expansion.Comment: 13 pages, 9 figures, accepted for publication in A&
Propfan Test Assessment (PTA)
The objectives of the Propfan Test Assessment (PTA) Program were to validate in flight the structural integrity of large-scale propfan blades and to measure noise characteristics of the propfan in both near and far fields. All program objectives were met or exceeded, on schedule and under budget. A Gulfstream Aerospace Corporation GII aircraft was modified to provide a testbed for the 2.74m (9 ft) diameter Hamilton Standard SR-7 propfan which was driven by a 4475 kw (600 shp) turboshaft engine mounted on the left-hand wing of the aircraft. Flight research tests were performed for 20 combinations of speed and altitude within a flight envelope that extended to Mach numbers of 0.85 and altitudes of 12,192m (40,000 ft). Propfan blade stress, near-field noise on aircraft surfaces, and cabin noise were recorded. Primary variables were propfan power and tip speed, and the nacelle tilt angle. Extensive low altitude far-field noise tests were made to measure flyover and sideline noise and the lateral attenuation of noise. In coopertion with the FAA, tests were also made of flyover noise for the aircraft at 6100m (20,000 ft) and 10,668m (35,000 ft). A final series of tests were flown to evaluate an advanced cabin wall noise treatment that was produced under a separate program by NASA-Langley Research Center
Propfan Test Assessment (PTA): Flight test report
The Propfan Test Assessment (PTA) aircraft was flown to obtain glade stress and noise data for a 2.74m (9 ft.) diameter single rotation propfan. Tests were performed at Mach numbers to 0.85 and altitudes to 12,192m (40,000 ft.). The propfan was well-behaved structurally over the entire flight envelope, demonstrating that the blade design technology was completely adequate. Noise data were characterized by strong signals at blade passage frequency and up to 10 harmonics. Cabin noise was not so high as to preclude attainment of comfortable levels with suitable wall treatment. Community noise was not excessive
Seat Belt Use Compliance in Kansas
Passenger vehicle occupant restraints are regarded as the easiest and the most effective way of reducing the number of highway fatalities. Strong vehicle occupant protection enforcement laws are regarded as the most effective way to increase seat belt use. The increase in restraint use in the United States and other countries has been largely attributed to mandatory seat belt use legislation. Many fatalities and injuries in motor vehicle crashes could be avoided if more passengers used their seat belts. Studies have shown that primary laws have been more effective in seat belt use compliance than secondary laws. Also, legislation has been found to be more effective in increasing seat belt use than educational or incentive programs in the absence of legislation. The United States has been lagging behind other developed countries in enacting strong seat belts use laws and enforcement strengthening. In Kansas, the seat belt usage compliance rate was 60% in 2000, which was far below the national average of 71%. The seat belt fine for Kansas is among the lowest in the US and is regarded by the National Highway Traffic Safety Administration (NHTSA) as not adequate. In Kansas, the younger childâs compliance rate is the highest while the older childâs compliance rate is the lowest among vehicle occupantsâ groups. Pickup truck occupants consistently had the lowest compliance rates as compared to cars, sports utility vehicles (SUVs), and vans
Light-particle emission from the fissioning nuclei 126Ba, 188Pt and (266,272,278)/110: theoretical predictions and experimental results
We present a comparison of our model treating fission dynamics in conjunction
with light-particle (n, p, alpha) evaporation with the available experimental
data for the nuclei 126Ba, 188Pt and three isotopes of the element Z=110. The
dynamics of the symmetric fission process is described through the solution of
a classical Langevin equation for a single collective variable characterizing
the nuclear deformation along the fission path. A microscopic approach is used
to evaluate the emission rates for pre-fission light particles.
Entrance-channel effects are taken into account by generating an initial spin
distribution of the compound nucleus formed by the fusion of two deformed
nuclei with different relative orientations
Design and integration of vision based sensors for unmanned aerial vehicles navigation and guidance
In this paper we present a novel Navigation and Guidance System (NGS) for Unmanned Aerial Vehicles (UAVs) based on Vision Based Navigation (VBN) and other avionics sensors. The main objective of our research is to design a lowcost and low-weight/volume NGS capable of providing the required level of performance in all flight phases of modern small- to medium-size UAVs, with a special focus on automated precision approach and landing, where VBN techniques can be fully exploited in a multisensory integrated architecture. Various existing techniques for VBN are compared and the Appearance-based Navigation (ABN) approach is selected for implementation
Carrier-phase GNSS attitude determination and control for small UAV applications
As part of our recent research to assess the potential of low-cost navigation sensors for Unmanned Aerial Vehicle (UAV) applications, we investigated the potential of carrier-phase Global Navigation Satellite System (GNSS) for attitude determination and control of small size UAVs. Recursive optimal estimation algorithms were developed for combining multiple attitude measurements obtained from different observation points (i.e., antenna locations), and their efficiencies were tested in various dynamic conditions. The proposed algorithms converged rapidly and produced the required output even during high dynamics manoeuvres. Results of theoretical performance analysis and simulation activities are presented in this paper, with emphasis on the advantages of the GNSS interferometric approach in UAV applications (i.e., low cost, high data-rate, low volume/weight, low signal processing requirements, etc.). The simulation activities focussed on the AEROSONDE UAV platform and considered the possible augmentation provided by interferometric GNSS techniques to a low-cost and low-weight/volume integrated navigation system (presented in the first part of this series) which employed a Vision-Based Navigation (VBN) system, a MicroElectro-Mechanical Sensor (MEMS) based Inertial Measurement Unit (IMU) and code-range GNSS (i.e., GPS and GALILEO) for position and velocity computations. The integrated VBN-IMU-GNSS (VIG) system was augmented using the inteferometric GNSS Attitude Determination (GAD)sensor data and a comparison of the performance achieved with the VIG and VIG/GAD integrated Navigation and Guidance Systems (NGS) is presented in this paper. Finally, the data provided by these NGS are used to optimise the design of a hybrid controller employing Fuzzy Logic and Proportional-Integral-Derivative (PID) techniques for the AEROSONDE UAV
- âŠ