How the interface type manipulates the thermomechanical response of nanostructured metals : A case study on nickel

The presence of interfaces with nanoscale spacing significantly enhances the strength of materials, but also the rate controlling processes of plastic flow are subject to change. Due to the confined grain volumes, intragranular dislocation-dislocation interactions, the predominant processes at the micrometer scale, are replaced by emission of dislocations from and their subsequent accommodation at the interfaces. Both processes not only depend on the interfacial spacing, but also on the atomistic structure of the interface. Hence, a thorough understanding how these processes are affected by the interface structure is required to predict and improve the behavior of nanomaterials. The present study attempts to rationalize this effect by investigating the thermomechanical behavior of samples consisting of three different interfaces. Pure nickel samples with predominant fractions of low- and high-angle as well as twin boundaries with a similar average spacing around 150 nm are investigated using high temperature nanoindentation strain rate jump tests. Depending on the interface structure, hardness, strain rate sensitivity and apparent activation volumes evolve distinctively different with testing temperature. While in case of high-angle boundaries for all quantities a pronounced thermal dependence is found, the other two interface types behave almost athermal in the same temperature range. These differences can be rationalized based on the different interfacial diffusivity, affecting the predominant process of interfacial stress relaxation

Synthesis of bulk reactive Ni-Al composites using high pressure torsion

17 USC 105 interim-entered record; under review.The article of record as published may be found at http://dx.doi.org/10.1016/j.jallcom.2020.157503Self-propagating exothermic reactions, for instance in the nickel-aluminum (Ni-Al) system, have been widely studied to create high performance intermetallic compounds or for in-situ welding. Their easy ignition once the phase spacing is reduced below the micron scale, makes top-down methods like high energy ball milling, ideal to fabricate such reactive nanostructures. A major drawback of ball milling is the need of a sintering step to form bulk pieces of the reactive material. However, this is not possible, as the targeted reactions would already proceed. Therefore, we investigate the ability of high pressure torsion as an alternative process, capable to produce bulk nanocomposites from powder mixtures. Severe straining of powder mixtures with a composition of 50 wt% Ni and 50 wt% Al enables fabrication of self reactive bulk samples with microstructures similar to those obtained from ball milling or magnetron sputtering. Samples deformed at ambient temperature are highly reactive and can be ignited signifi cantly below the Al melting point, finally predominantly consisting of Al3Ni2 and Al3Ni, independent of the applied strain. Although the reaction proceeds first at the edge of the disk, the strain gradient present in the disks does not prevent reaction of the whole sample.COMETAustrian Federal MinistriesDepartment of Energy National Nuclear Security AdministrationERC Advanced Grant INTELHYBCOMET programERC-2013-ADG-340025DENA0002377Project No 859480DE-AC02-06CH1135

Hyperbolic Deformation Applied to S = 1 Spin Chains - Scaling Relation in Excitation Energy -

We investigate excitation energies of hyperbolically deformed S = 1 spin chains, which are specified by the local energy scale f_j^{~} = \cosh j \lambda, where j is the lattice index and \lambda is the deformation parameter. The elementary excitation is well described by a quasiparticle hopping model, which is also expressed in the form of hyperbolic deformation. It is possible to estimate the excitation gap \Delta in the uniform limit \lambda \rightarrow 0, by means of a finite size scaling with respect to the system size N and the deformation parameter \lambda.Comment: 5 pages, 4 figure

Reconfigurable quantum metamaterials

By coupling controllable quantum systems into larger structures we introduce the concept of a quantum metamaterial. Conventional meta-materials represent one of the most important frontiers in optical design, with applications in diverse fields ranging from medicine to aerospace. Up until now however, metamaterials have themselves been classical structures and interact only with the classical properties of light. Here we describe a class of dynamic metamaterials, based on the quantum properties of coupled atom-cavity arrays, which are intrinsically lossless, reconfigurable, and operate fundamentally at the quantum level. We show how this new class of metamaterial could be used to create a reconfigurable quantum superlens possessing a negative index gradient for single photon imaging. With the inherent features of quantum superposition and entanglement of metamaterial properties, this new class of dynamic quantum metamaterial, opens a new vista for quantum science and technology.Comment: 16 pages, 8 figure

Entanglement Perturbation Theory for Antiferromagnetic Heisenberg Spin Chains

A recently developed numerical method, entanglement perturbation theory (EPT), is used to study the antiferromagnetic Heisenberg spin chains with z-axis anisotropy $\lambda$ and magnetic field B. To demonstrate the accuracy, we first apply EPT to the isotropic spin-1/2 antiferromagnetic Heisenberg model, and find that EPT successfully reproduces the exact Bethe Ansatz results for the ground state energy, the local magnetization, and the spin correlation functions (Bethe ansatz result is available for the first 7 lattice separations). In particular, EPT confirms for the first time the asymptotic behavior of the spin correlation functions predicted by the conformal field theory, which realizes only for lattice separations larger than 1000. Next, turning on the z-axis anisotropy and the magnetic field, the 2-spin and 4-spin correlation functions are calculated, and the results are compared with those obtained by Bosonization and density matrix renormalization group methods. Finally, for the spin-1 antiferromagnetic Heisenberg model, the ground state phase diagram in $\lambda$ space is determined with help of the Roomany-Wyld RG finite-size-scaling. The results are in good agreement with those obtained by the level-spectroscopy method.Comment: 12 pages, 14 figure

Treatment delay of bone tumours, compilation of a sociodemographic risk profile: A retrospective study

<p>Abstract</p> <p>Background</p> <p>Bone tumours are comparatively rare tumours and delays in diagnosis and treatment are common. The purpose of this study was to analyse sociodemographic risk factors for bone tumour patients in order to identify those at risk of prolonged patients delay (time span from first symptoms to consultation), professional delay (from consultation to treatment) or symptom interval (from first symptoms to treatment). Understanding these relationships might enable us to shorten time to diagnosis and therapy.</p> <p>Methods</p> <p>We carried out a retrospective analysis of 265 patients with bone tumours documenting sociodemographic factors, patient delay, professional delay and symptom interval. A multivariate explorative Cox model was performed for each delay.</p> <p>Results</p> <p>Female gender was associated with a prolonged patient delay. Age under 30 years and rural living predisposes to a prolonged professional delay and symptom interval.</p> <p>Conclusion</p> <p>Early diagnosis and prompt treatment are required for successful management of most bone tumour patients. We succeeded in identifying the histology independent risk factors of age under 30 years and rural habitation for treatment delay in bone tumour patients. Knowing about the existence of these risk groups age under 30 years and female gender could help the physician to diagnose bone tumours earlier. The causes for the treatment delays of patients living in a rural area have to be investigated further. If the delay initiates in the lower education of rural general physicians, further training about bone tumours might advance early detection. Hence the outcome of patients with bone tumours could be improved.</p

Climate patterns during former periods of mountain glaciation in Britain and Ireland: Inferences from the cirque record

We map glacial cirques, and analyse spatial variability in their altitude and aspect to derive a long-term, time-integrated, perspective on climate patterns during former periods of mountain glaciation (likely spanning multiple Quaternary glaciations) in Britain and Ireland. The data reveal that, although air temperatures were important, exposure to moisture-bearing air masses was the key factor in regulating sites of former mountain glacier formation, and indicate that during such periods, moisture supply was largely controlled by North Atlantic westerlies, with notable inland precipitation gradients (precipitation decreasing inland), similar to present day. In places, trends in cirque altitude may also reflect regional differences in the extent of cirque deepening, controlled by the dimensions and dynamics of the glaciers that came to occupy them. Specifically, comparatively deep cirques in coastal locations may reflect the former presence of dynamic (fed by moisture from the North Atlantic), but comparatively small, glaciers (largely confined to their cirques). By contrast, decreasing cirque depth further inland, may reflect the former presence of larger and/or less dynamic ice masses, occupying comparatively continental climatic conditions

Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review

Ultrafine-grained and heterostructured materials are currently of high interest due to their superior mechanical and functional properties. Severe plastic deformation (SPD) is one of the most effective methods to produce such materials with unique microstructure-property relationships. In this review paper, after summarizing the recent progress in developing various SPD methods for processing bulk, surface and powder of materials, the main structural and microstructural features of SPD-processed materials are explained including lattice defects, grain boundaries and phase transformations. The properties and potential applications of SPD-processed materials are then reviewed in detail including tensile properties, creep, superplasticity, hydrogen embrittlement resistance, electrical conductivity, magnetic properties, optical properties, solar energy harvesting, photocatalysis, electrocatalysis, hydrolysis, hydrogen storage, hydrogen production, CO2 conversion, corrosion resistance and biocompatibility. It is shown that achieving such properties is not limited to pure metals and conventional metallic alloys, and a wide range of materials are currently processed by SPD, including high-entropy alloys, glasses, semiconductors, ceramics and polymers. It is particularly emphasized that SPD has moved from a simple metal processing tool to a powerful means for the discovery and synthesis of new superfunctional metallic and nonmetallic materials. The article ends by declaring that the borders of SPD have been extended from materials science and it has become an interdisciplinary tool to address scientific questions such as the mechanisms of geological and astronomical phenomena and the origin of life