85 research outputs found

    Phase-related patterns of tidal sand waves and benthic organisms: field observations and idealised modelling

    Get PDF
    Observations from the field show that the spatial distribution of benthic organisms is strongly correlated to the morphological structure of tidal sand waves. In particular the troughs of sand waves are typified by a large benthic community, in contrast to the crest. In this paper, we present an idealised process-based model to study these patterns of biota and sand waves. Our model results agree with the observations that these phase-related patterns can arise on the seabed. Moreover, we show that local topography disturbances may lead to spatial patterns of both sand waves and biomass

    Modelling the two-way coupling of tidal sand waves and benthic organisms:a linear stability approach

    Get PDF
    We use a linear stability approach to develop a process-based morphodynamic model including a two-way coupling between tidal sand wave dynamics and benthic organisms. With this model we are able to study both the effect of benthic organisms on the hydro- and sediment dynamics, and the effect of spatial and temporal environmental variations on the distribution of these organisms. Specifically, we include two coupling processes: the effect of the biomass of the organisms on the bottom slip parameter, and the effect of shear stress variations on the biological carrying capacity. We discuss the differences and similarities between the methodology used in this work and that from ‘traditional’ (morphodynamics only) stability modelling studies. Here, we end up with a 2×2 linear eigenvalue problem, which leads to two distinct eigenmodes for each topographic wave number. These eigenmodes control the growth and migration properties of both sand waves and benthic organisms (biomass). Apart from hydrodynamic forcing, the biomass also grows autonomously, which results in a changing fastest growing mode (FGM, i.e. the preferred wavelength) over time. As a result, in contrast to ‘traditional’ stability modelling studies, the FGM for a certain model outcome does not necessarily have to be dominant in the field. Therefore, we also analysed the temporal evolution of an initial bed hump (without perturbing biomass) and of an initial biomass hump (without perturbing topography). It turns out that these local disturbances may trigger the combined growth of sand waves and spatially varying biomass patterns. Moreover, the results reveal that the autonomous benthic growth significantly influences the growth rate of sand waves. Finally, we show that biomass maxima tend to concentrate in the region around the trough and lee side slope of sand waves, which corresponds to observations in the field

    Video transects reveal that tidal sand waves affect the spatial distribution of benthic organisms and sand ripples

    Get PDF
    The sandy seabed of shallow coastal shelf seas displays morphological patterns of various dimensions. The seabed also harbors a rich ecosystem. Increasing pressure from human-induced disturbances necessitates further study on drivers of benthic community distributions over morphological patterns. Moreover, a greater understanding of the sand ripple distribution over tidal sand waves may improve morphological model predictions. Here we analyzed the biotic abundance and ripple morphology in sand wave troughs and crests using video transects. We found that both the epibenthos and endobenthos are significantly more abundant in sand wave troughs, where ripples are less abundant and more irregularly shaped. Finally, we show that camera systems are relatively quick and effective tools to study biotic spatial patterns in relation to seabed morphology

    Semantics-based information extraction for detecting economic events

    Get PDF
    As today's financial markets are sensitive to breaking news on economic events, accurate and timely automatic identification of events in news items is crucial. Unstructured news items originating from many heterogeneous sources have to be mined in order to extract knowledge useful for guiding decision making processes. Hence, we propose the Semantics-Based Pipeline for Economic Event Detection (SPEED), focusing on extracting financial events from news articles and annotating these with meta-data at a speed that enables real-time use. In our implementation, we use some components of an existing framework as well as new components, e.g., a high-performance Ontology Gazetteer, a Word Group Look-Up component, a Word Sense Disambiguator, and components for detecting economic events. Through their interaction with a domain-specific ontology, our novel, semantically enabled components constitute a feedback loop which fosters future reuse of acquired knowledge in the event detection process

    Ceramic Microbial Fuel Cells Stack: Power generation in standard and supercapacitive mode

    Get PDF
    © 2018 The Author(s). In this work, a microbial fuel cell (MFC) stack containing 28 ceramic MFCs was tested in both standard and supercapacitive modes. The MFCs consisted of carbon veil anodes wrapped around the ceramic separator and air-breathing cathodes based on activated carbon catalyst pressed on a stainless steel mesh. The anodes and cathodes were connected in parallel. The electrolytes utilized had different solution conductivities ranging from 2.0 mScm-1 to 40.1 mScm-1, simulating diverse wastewaters. Polarization curves of MFCs showed a general enhancement in performance with the increase of the electrolyte solution conductivity. The maximum stationary power density was 3.2 mW (3.2 Wm-3) at 2.0 mScm-1 that increased to 10.6 mW (10.6 Wm-3) at the highest solution conductivity (40.1 mScm-1). For the first time, MFCs stack with 1 L operating volume was also tested in supercapacitive mode, where full galvanostatic discharges are presented. Also in the latter case, performance once again improved with the increase in solution conductivity. Particularly, the increase in solution conductivity decreased dramatically the ohmic resistance and therefore the time for complete discharge was elongated, with a resultant increase in power. Maximum power achieved varied between 7.6 mW (7.6 Wm-3) at 2.0 mScm-1 and 27.4 mW (27.4 Wm-3) at 40.1 mScm-1

    Dependence of Intramyocardial Pressure and Coronary Flow on Ventricular Loading and Contractility: A Model Study

    Get PDF
    The phasic coronary arterial inflow during the normal cardiac cycle has been explained with simple (waterfall, intramyocardial pump) models, emphasizing the role of ventricular pressure. To explain changes in isovolumic and low afterload beats, these models were extended with the effect of three-dimensional wall stress, nonlinear characteristics of the coronary bed, and extravascular fluid exchange. With the associated increase in the number of model parameters, a detailed parameter sensitivity analysis has become difficult. Therefore we investigated the primary relations between ventricular pressure and volume, wall stress, intramyocardial pressure and coronary blood flow, with a mathematical model with a limited number of parameters. The model replicates several experimental observations: the phasic character of coronary inflow is virtually independent of maximum ventricular pressure, the amplitude of the coronary flow signal varies about proportionally with cardiac contractility, and intramyocardial pressure in the ventricular wall may exceed ventricular pressure. A parameter sensitivity analysis shows that the normalized amplitude of coronary inflow is mainly determined by contractility, reflected in ventricular pressure and, at low ventricular volumes, radial wall stress. Normalized flow amplitude is less sensitive to myocardial coronary compliance and resistance, and to the relation between active fiber stress, time, and sarcomere shortening velocity

    Ecological impacts of non-native Pacific oysters (Crassostrea gigas) and management measures for protected areas in Europe

    Get PDF
    Pacific oysters are now one of the most ‘globalised’ marine invertebrates. They dominate bivalve aquaculture production in many regions and wild populations are increasingly becoming established, with potential to displace native species and modify habitats and ecosystems. While some fishing communities may benefit from wild populations, there is now a tension between the continued production of Pacific oysters and risk to biodiversity, which is of particular concern within protected sites. The issue of the Pacific oyster therefore locates at the intersection between two policy areas: one concerning the conservation of protected habitats, the other relating to livelihoods and the socio-economics of coastal aquaculture and fishing communities. To help provide an informed basis for management decisions, we first summarise evidence for ecological impacts of wild Pacific oysters in representative coastal habitats. At local scales, it is clear that establishment of Pacific oysters can significantly alter diversity, community structure and ecosystem processes, with effects varying among habitats and locations and with the density of oysters. Less evidence is available to evaluate regional-scale impacts. A range of management measures have been applied to mitigate negative impacts of wild Pacific oysters and we develop recommendations which are consistent with the scientific evidence and believe compatible with multiple interests. We conclude that all stakeholders must engage in regional decision making to help minimise negative environmental impacts, and promote sustainable industry development

    Uniendo ingeniería y ecología: la protección costera basada en ecosistemas

    Get PDF
    En un contexto de crecientes impactos y riesgos socio-económicos en las costas del planeta, la protección costera basada en ecosistemas surge como un nuevo paradigma que une los principios de protección, sostenibilidad y resiliencia, a la vez que proporciona múltiples beneficios. Este artículo ofrece una perspectiva sobre qué son y cómo se pueden utilizar las defensas naturales en el diseño, planificación y gestión de costas. La política pública muestra un creciente interés por su implementación general y el cuerpo de conocimiento y experiencia alrededor de la también denominada infraestructura ?verde? es creciente, pero aún existen importantes barreras que salvar. Una de ellas es estandarizar su diseño en términos ingenieriles, así como reconocer los aspectos que los diferencian respecto a enfoques tradicionales. La adaptación climática y la reducción de riesgos son áreas en las que su utilización puede ser más significativa, debido a la variedad de servicios que ofrecen. Tanto desde el punto de vista técnico como económico, existen argumentos sólidos para evitar la degradación de los ecosistemas, avanzando su restauración y conservación, como también desde la perspectiva de la defensa de las costas.In a context of increasing socio-economic impacts and risks in the coastal areas of the planet, coastal protection based on ecosystem features becomes a new paradigm that combines the principles of conservation, sustainability and resilience, while providing multiple benefits. This paper provides a perspective on what these are and how they can be used in the design, planning and management of the coastal zones. Policy-makers are calling for further uptake and implementation across the board and the body of knowledge and experience around the socalled ?green? infrastructure is growing, but there are still major barriers for a widespread uptake. One of them is to standardize designs in engineering terms, recognizing the different characteristics compared to traditional engineering solutions. Climate adaptation and risk reduction are areas where its use may be more significant, for the variety of services they offer. Both technically and economically, there are strong arguments to prevent degradation of ecosystems and to advance in their restoration and conservation, as well as from a coastal defense perspective
    corecore