Development of space stable thermal control coatings for use on large space vehicles

The evaluation and environmental testing of zinc orthotitanate pigments for use as space stable thermal control coatings on large space vehicles are discussed. Electron paramagnetic resonance spectra of the pigments and their precursor compounds are examined. A continuing study of the spectral intensity of mercury-argon and mercury-xenon sources in reported. Results of long term environmental testing of commercially available, strippable, protective coatings are discussed

Measurement-induced qubit state mixing in circuit QED from up-converted dephasing noise

We observe measurement-induced qubit state mixing in a transmon qubit dispersively coupled to a planar readout cavity. Our results indicate that dephasing noise at the qubit-readout detuning frequency is up-converted by readout photons to cause spurious qubit state transitions, thus limiting the nondemolition character of the readout. Furthermore, we use the qubit transition rate as a tool to extract an equivalent flux noise spectral density at f ~ 1 GHz and find agreement with values extrapolated from a $1/f^\alpha$ fit to the measured flux noise spectral density below 1 Hz.Comment: 5 pages, 4 figures. Final journal versio

Social effects of territorial neighbours on the timing of spring breeding in North American red squirrels

This is the author accepted manuscript. The final version is available from Wiley via the DOI in this recordOrganisms can affect one another’s phenotypes when they socially interact. Indirect genetic effects occur when an individual’s phenotype is affected by genes expressed in another individual. These heritable effects can enhance or reduce adaptive potential, thereby accelerating or reversing evolutionary change. Quantifying these social effects is therefore crucial for our understanding of evolution, yet estimates of indirect genetic effects in wild animals are limited to dyadic interactions. We estimated indirect phenotypic and genetic effects, and their covariance with direct effects, for the date of spring breeding in North American red squirrels (Tamiasciurus hudsonicus) living in an array of territories of varying spatial proximity. Additionally, we estimated indirect effects and the strength of selection at low and high population densities. Social effects of neighbours on the date of spring breeding were different from zero at high population densities but not at low population densities. Indirect phenotypic effects accounted for a larger amount of variation in the date of breeding than differences attributable to the among-individual variance, suggesting social interactions are important for determining breeding dates. The genetic component to these indirect effects was however not statistically significant. We therefore showcase a powerful and flexible method that will allow researchers working in organisms with a range of social systems to estimate indirect phenotypic and genetic effects, and demonstrate the degree to which social interactions can influence phenotypes, even in a solitary species

18F-GE-180: a novel TSPO radiotracer compared to 11C-R-PK11195 in a preclinical model of stroke

PURPOSE: Neuroinflammation plays a critical role in various neuropathological conditions, and hence there is renewed interest in the translocator protein (TSPO) as a biomarker of microglial activation and macrophage infiltration in the brain. This is reflected in the large amount of research conducted seeking to replace the prototypical PET radiotracer 11C-R-PK11195 with a TSPO ligand with higher performance. Here we report the in vivo preclinical investigation of the novel TSPO tracer 18F-GE-180 in a rat model of stroke. METHODS: Focal cerebral ischaemia was induced in Wistar rats by 60-min occlusion of the middle cerebral artery (MCAO). Brain damage was assessed 24 h after MCAO by T2 MRI. Rats were scanned with 11C-R-PK11195 and 18F-GE-180 5 or 6 days after MCAO. Specificity of binding was confirmed by injection of unlabelled R-PK11195 or GE-180 20 min after injection of 18F-GE-180. In vivo data were confirmed by ex vivo immunohistochemistry for microglial (CD11b) and astrocytic biomarkers (GFAP). RESULTS: 18F-GE-180 uptake was 24 % higher in the core of the ischaemic lesion and 18 % lower in the contralateral healthy tissue than that of 11C-R-PK11195 uptake (1.5 ± 0.2-fold higher signal to noise ratio). We confirmed this finding using the simplified reference tissue model (BPND = 3.5 ± 0.4 and 2.4 ± 0.5 for 18F-GE-180 and 11C-R-PK11195, respectively, with R 1 = 1). Injection of unlabelled R-PK11195 or GE-180 20 min after injection of 18F-GE-180 significantly displaced 18F-GE-180 (69 ± 5 % and 63 ± 4 %, respectively). Specificity of the binding was also confirmed by in vitro autoradiography, and the location and presence of activated microglia and infiltrated macrophages were confirmed by immunohistochemistry. CONCLUSION: The in vivo binding characteristics of 18F-GE-180 demonstrate a better signal to noise ratio than 11C-R-PK11195 due to both a better signal in the lesion and lower nonspecific binding in healthy tissue. These results provide evidence that 18F-GE-180 is a strong candidate to replace 11C-R-PK11195

The play's the thing

For very understandable reasons phenomenological approaches predominate in the field of sensory urbanism. This paper does not seek to add to that particular discourse. Rather it takes Rorty’s postmodernized Pragmatism as its starting point and develops a position on the role of multi-modal design representation in the design process as a means of admitting many voices and managing multidisciplinary collaboration. This paper will interrogate some of the concepts underpinning the Sensory Urbanism project to help define the scope of interest in multi-modal representations. It will then explore a range of techniques and approaches developed by artists and designers during the past fifty years or so and comment on how they might inform the question of multi-modal representation. In conclusion I will argue that we should develop a heterogeneous tool kit that adopts, adapts and re-invents existing methods because this will better serve our purposes during the exploratory phase(s) of any design project that deals with complexity

Density estimates for Canada lynx vary among estimation methods

Abstract Unbiased population density estimates are critical for ecological research and wildlife management but are often difficult to obtain. Researchers use a variety of sampling and statistical methods to generate estimates of density, but few studies have compared estimates across methods. During 2016–2017, we surveyed Canada lynx (Lynx canadensis) in southwestern Yukon Territory, Canada, using track transect counts, hair snares, camera traps, live traps, and Global Positioning System (GPS) collars. From these data, we estimated lynx density with two linearly scaled count methods, one spatial mark–recapture method, three spatial mark–resight methods, and one cumulative‐time method. We found up to fivefold variation in point density estimates despite adhering to method requirements and assumptions in a manner consistent with other studies. Our results highlight the dependency of density estimates on sampling process and model assumptions and demonstrate the value of careful and unbiased sampling design. Further research is needed to fully assess the accuracy and limitations of the many wildlife density estimation methods that are currently in use so that techniques can be appropriately applied to typical study systems and species

Milka Ivić, PRAVCI U LINGVISTICI Državna založba Stovenije, Ljubljana 1963, str. 190.

Scheduling jobs with deadlines, each of which de nes the latest time that a job must be completed, can be challenging on the cloud due to incurred costs and unpredictable performance. This problem is further complicated when there is not enough information to e ectively schedule a job such that its deadline is satis ed, and the cost is minimised. In this paper, we present an approach to schedule jobs, whose performance are unknown before execution, with deadlines on the cloud. By performing a sampling phase to collect the necessary information about those jobs, our approach delivers the scheduling decision within 10% cost and 16% violation rate when compared to the ideal setting, which has complete knowledge about each of the jobs from the beginning. It is noted that our proposed algorithm outperforms existing approaches, which use a xed amount of resources by reducing the violation cost by at least two times.Postprin

Laboratory and field measurements of nail guns' noise emission

Field measurements and laboratory measurements using EN 12549 was presented. The rig was held in a small comfortable backpack and even if the sensors were wired to the acquisition card, the worker could work without obstruction. Between 8 and 12 trials of 10 impacts were recorded for each nailer/worker combination. Eight framing nailers and two roofing nailers were tested in the laboratory under controlled conditions as per the EN 12549 standard. From this standard, three operators were required to perform five trials of 10 nails each, with each trial lasting a period of 30 seconds. The measures were performed in a semi anechoic room where both the sound power and the sound pressure level at the worker?s ear were measured. Concerning the EN 12549 standard, it seems appropriate in order to perform representative workplace ranking of nailers following their sound power level values. Concerning the reduction of workers? noise exposure, the battery operated nailer stands out as the best choice as its level is at least 6 dBs lower than any other tested nailer in both lab and field measurements

Optimisation of energetic and reproductive gains explains behavioural responses to environmental variation across seasons and years

Animals switch between inactive and active states, simultaneously impacting their energy intake, energy expenditure and predation risk, and collectively defining how they engage with environmental variation and trophic interactions. We assess daily activity responses to long‐term variation in temperature, resources and mating opportunities to examine whether individuals choose to be active or inactive according to an optimisation of the relative energetic and reproductive gains each state offers. We show that this simplified behavioural decision approach predicts most activity variation (R2 = 0.83) expressed by free‐ranging red squirrels over 4 years, as quantified through accelerometer recordings (489 deployments; 5066 squirrel‐days). Recognising activity as a determinant of energetic status, the predictability of activity variation aggregated at a daily scale, and the clear signal that behaviour is environmentally forced through optimisation of gain, provides an integrated approach to examine behavioural variation as an intermediary between environmental variation and energetic, life‐history and ecological outcomes.By assessing daily activity responses to long‐term variation in temperature, resources, and mating opportunities, we examine whether individuals choose to be active or inactive according to an optimization of energetic and reproductive gains. This simplified behavioural decision approach predicts most daily activity variation (R2 = 0.83) expressed by free‐ranging red squirrels over four years, as quantified through accelerometer recordings. Here we provide an integrated approach to examine behavioural variation as an intermediary between environmental variation and energetic, life‐history, and ecological outcomes.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/154889/1/ele13494_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/154889/2/ele13494.pd

Optical studies for the super separator spectrometer S3

International audienceS3 (Super Separator Spectrometer) [1] is a future device designed for experiments with the high intensity heavy ion stable beams of SPIRAL2 [2] at GANIL (Caen, France). It will include a target resistant to these very high intensities, a first stage momentum achromat for primary beam extraction and suppression, a second stage mass spectrometer and a dedicated detection system. This spectrometer includes large aperture quadrupole triplets with embedded multipolar corrections. To enable the primary beam extraction one triplet has to be opened on one side, which requires an appropriate design of such a multipolar magnet. The final mass separation power required for S3 needs a careful design of the optics with a high level of aberration correction. Multiple symmetric lattices were studied for this purpose. A 4-fold symmetric lattice and the achieved results are described in this paper