2,334 research outputs found

    Millimeter-Waves Structures on Benzocyclobutene Dielectric Substrate

    Get PDF
    The need of low-loss substrate materials with stable dielectric performances is a strong requirement when working at millimeter frequencies, where standard dielectrics exhibit prohibitive losses. In this paper, the authors focus their attention on a polymer material, the benzocyclobutene (BCB), having a low dielectric constant and a low loss tangent, with a stable behavior up to THz frequencies. A specific in-house manufacture technology is described to realize millimeter-wave structures on a BCB dielectric substrate. Experimental validations on BCB-based circuits and antennas prototypes are discussed

    Sustained low influenza vaccination in health care workers after H1N1 pandemic: A cross sectional study in an Italian health care setting for at-risk patients

    Get PDF
    Background: Despite consistent recommendations by all Public Health Authorities in support of annual influenza vaccination for at-risk categories, there is still a low uptake of influenza vaccine in these groups including health care workers (HCWs). Aim of this observational two-phase study was to estimate the immunization rates for influenza in four subsequent seasons and for pandemic H1N1 influenza in HCWs of a University Hospital, and to investigate its distribution pattern and the main determinants of immunization. Phase 1 data collection was performed in 2009-2010, during the peak of H1N1 pandemic. Phase 2 data collection, aimed to investigate seasonal influenza vaccination coverage in the three seasons after pandemic, was performed in 2012-2013. Methods: The overall H1N1 vaccination rate was derived by the Hospital immunization registry. In 2010, the personnel of three Departments (Infectious Diseases, Pediatrics and Gynecology/Obstetrics) completed a survey on influenza. A second-phase analysis was performed in 2012 to investigate influenza vaccination coverage in three consecutive seasons. Results: The first-phase survey showed a low coverage for influenza in all categories (17 %), with the lowest rate in nurses (8.1 %). A total of 37 % of health care workers received H1N1 vaccine, with the highest rate among physicians and the lowest in nurses. H1N1 vaccination was closely related to the Department, being higher in the Department of Infectious Diseases (53.7 %) and Pediatrics (42.4 %) than in Gynecology/Obstetrics (8.3 %). The second-phase survey showed the lowest rate of influenza vaccination in 2012/13 season. The main reasons for not being vaccinated were "Unsure of the efficacy of vaccine" and "Feel not at-risk of getting influenza or its complications". Despite recommendations, influenza vaccine uptake remains poor. Conclusion: Immunization is largely perceived as a personal protection rather than a measure needed to prevent disease spreading to at-risk patients. Compulsory vaccination against influenza should be considered as a possible strategy, at least in health institutions where at-risk patients are admitted

    Screening for hotspot mutations in PI3K, JAK2, FLT3 and NPM1 in patients with myelodysplastic syndromes

    Get PDF
    INTRODUCTION: Myelodysplastic syndromes encompass a heterogeneous group of clonal hematopoietic stem cell disorders characterized by ineffective hematopoiesis, refractory cytopenia and a tendency to progress toward acute myeloid leukemia. The accumulation of genetic alterations is closely associated with the progression of myelodysplastic syndromes toward acute myeloid leukemia. OBJECTIVE: To investigate the presence of mutations in the points most frequent for mutations (hotspot mutations) in phosphatidylinositol-3-kinase (PI3K), Janus kinase 2 (JAK2), FMS-like tyrosine kinase 3 (FLT3) and nucleophosmin (NPM1), which are involved in leukemia and other cancers, in a population of Brazilian MDS patients. METHODS: Fifty-one myelodysplastic syndromes patients were included in the study. According to French-American-British classification, the patients were distributed as follows: 31 with refractory anemia, 8 with refractory anemia with ringed sideroblasts, 7 with refractory anemia with excess blasts, 3 with refractory anemia with excess blasts in transformation and 2 with chronic myelomonocytic leukemia. Bone marrow samples were obtained and screened for the presence of hotspot mutations using analysis based on amplification with the polymerase chain reaction, sequencing, fragment size polymorphisms or restriction enzyme digestion. All patients were screened for mutations at the time of diagnosis, and 5 patients were also screened at the time of disease progression. RESULTS: In the genes studied, no mutations were detected in the patients at the time of diagnosis. One patient with chronic myelomonocytic leukemia was heterozygous for a Janus kinase 2 mutation after disease progression. CONCLUSIONS: These results show that hotspot mutations in the PI3K, JAK2, FLT3 and NPM1 genes are not common in MDS patients; nevertheless, JAK2 mutations may be present in myelodysplasia during disease progression

    Cooling of a finned cylinder by a jet flow of air

    Get PDF

    Theory of mechanical unfolding of homopolymer globule: all-or-none transition in force-clamp mode vs phase coexistence in position-clamp mode

    Full text link
    Equilibrium mechanical unfolding of a globule formed by long flexible homopolymer chain collapsed in a poor solvent and subjected to an extensional force f (force-clamp mode) or extensional deformation D (position-clamp mode) is studied theoretically. Our analysis, like all previous analysis of this problem, shows that the globule behaves essentially differently in two modes of extension. In the force-clamp mode, mechanical unfolding of the globule with increasing applied force occurs without intramolecular microphase segregation, and at certain threshold value of the pulling force the globule unfolds as a whole ("all-or-none" transition). The value of the threshold force and the corresponding jump in the distance between the chain ends increase with a deterioration of the solvent quality and/or with an increase in the degree of polymerization. In the position-clamp mode, the globule unfolding occurs via intramolecular microphase coexistence of globular and extended microphases followed by an abrupt unraveling transition. Reaction force in the microphase segregation regime demonstrates an "anomalous" decrease with increasing extension. Comparison of deformation curves in force and position-clamp modes demonstrates that at weak and strong extensions the curves for two modes coincide, differences are observed in the intermediate extension range. Another unfolding scenario is typical for short globules: in both modes of extension they unfold continuously, without jumps or intramolecular microphase coexistence, by passing a sequence of uniformly elongated configurations.Comment: 19 pages, 13 figures, 1 tabl

    Sabotage in Contests: A Survey

    Get PDF
    A contest is a situation in which individuals expend irretrievable resources to win valuable prize(s). ‘Sabotage’ is a deliberate and costly act of damaging a rival’s' likelihood of winning the contest. Sabotage can be observed in, e.g., sports, war, promotion tournaments, political or marketing campaigns. In this article, we provide a model and various perspectives on such sabotage activities and review the economics literature analyzing the act of sabotage in contests. We discuss the theories and evidence highlighting the means of sabotage, why sabotage occurs, and the effects of sabotage on individual players and on overall welfare, along with possible mechanisms to reduce sabotage. We note that most sabotage activities are aimed at the ablest player, the possibility of sabotage reduces productive effort exerted by the players, and sabotage may lessen the effectiveness of public policies, such as affirmative action, or information revelation in contests. We discuss various policies that a designer may employ to counteract sabotage activities. We conclude by pointing out some areas of future research

    The Data Quality Monitoring for the CMS Silicon Strip Tracker

    Get PDF
    The CMS Silicon Strip Tracker (SST), consisting of more than 10 million channels, is organized in about 15,000 detector modules and it is the largest silicon strip tracker ever built for high energy physics experiments. The Data Quality Monitoring system for the Tracker has been developed within the CMS Software framework. More than 100,000 monitorable quantities need to be managed by the DQM system that organizes them in a hierarchical structure reflecting the detector arrangement in subcomponents and the various levels of data processing. Monitorable quantities computed at the level of individual detectors are processed to extract automatic quality checks and summary results that can be visualized with specialized graphical user interfaces. In view of the great complexity of the CMS Tracker detector the standard visualization tools based on histograms have been complemented with 2 and 3 dimensional graphical images of the subdetector that can show the whole detector down to single channel resolution. The functionalities of the CMS Silicon Strip Tracker DQM system and the experience acquired during the SST commissioning will be described

    Precision luminosity measurements at LHCb

    Get PDF
    Measuring cross-sections at the LHC requires the luminosity to be determined accurately at each centre-of-mass energy √s. In this paper results are reported from the luminosity calibrations carried out at the LHC interaction point 8 with the LHCb detector for √s = 2.76, 7 and 8 TeV (proton-proton collisions) and for √sNN = 5 TeV (proton-lead collisions). Both the "van der Meer scan" and "beam-gas imaging" luminosity calibration methods were employed. It is observed that the beam density profile cannot always be described by a function that is factorizable in the two transverse coordinates. The introduction of a two-dimensional description of the beams improves significantly the consistency of the results. For proton-proton interactions at √s = 8 TeV a relative precision of the luminosity calibration of 1.47% is obtained using van der Meer scans and 1.43% using beam-gas imaging, resulting in a combined precision of 1.12%. Applying the calibration to the full data set determines the luminosity with a precision of 1.16%. This represents the most precise luminosity measurement achieved so far at a bunched-beam hadron collider

    Performance of the LHCb vertex locator

    Get PDF
    The Vertex Locator (VELO) is a silicon microstrip detector that surrounds the proton-proton interaction region in the LHCb experiment. The performance of the detector during the first years of its physics operation is reviewed. The system is operated in vacuum, uses a bi-phase CO2 cooling system, and the sensors are moved to 7 mm from the LHC beam for physics data taking. The performance and stability of these characteristic features of the detector are described, and details of the material budget are given. The calibration of the timing and the data processing algorithms that are implemented in FPGAs are described. The system performance is fully characterised. The sensors have a signal to noise ratio of approximately 20 and a best hit resolution of 4 ÎŒm is achieved at the optimal track angle. The typical detector occupancy for minimum bias events in standard operating conditions in 2011 is around 0.5%, and the detector has less than 1% of faulty strips. The proximity of the detector to the beam means that the inner regions of the n+-on-n sensors have undergone space-charge sign inversion due to radiation damage. The VELO performance parameters that drive the experiment's physics sensitivity are also given. The track finding efficiency of the VELO is typically above 98% and the modules have been aligned to a precision of 1 ÎŒm for translations in the plane transverse to the beam. A primary vertex resolution of 13 ÎŒm in the transverse plane and 71 ÎŒm along the beam axis is achieved for vertices with 25 tracks. An impact parameter resolution of less than 35 ÎŒm is achieved for particles with transverse momentum greater than 1 GeV/c

    Prevalence of HSV1/2 Congenital Infection Assessed Through Genome Detection on Dried Blood Spot in Individuals with Autism Spectrum Disorders

    Get PDF
    Background/Aim: Etiopathogenesis of autism spectrum disorders (ASD) remains to be elucidated. Congenital infections, particularly viral infections, have repeatedly been associated with the onset of such disorders. Our study aimed at assessing the prevalence of herpes simplex type 1 and 2 (HSV1/2) congenital infections in patients with ASD. Materials and Methods: In our case-control study, a total of 38 children with ASD were compared to 44 age- and sex-matched controls regarding the presence of HSV1/2 infection though viral DNA polymerase chain reaction performed on dried blood spots collected at birth. Results: No HSV congenital infection was detected in either group. Conclusion: Our negative finding is in agreement with other studies that failed to demonstrate a definitive role of HSV on the onset of ASD. Further investigation of congenital HSV prevalence in larger and more powerful studies is needed to undeniably discard a role of such virus in the etiopathogenesis of ASD
    • 

    corecore