3,121 research outputs found
Synergic strategies to improve the PBF-LB/M processability of a cracking-sensitive alloy
The Powder Bed Fusion-Laser Beam\Metals (PBF-LB\M) is a promising additive manufacturing process
that can be used to directly produce functional components with a complex shape for a wide variety
of applications. However, the layer-by-layer scanning and high cooling rates result in a high thermal gra-
dient and thus, in thermally induced stresses. The stresses developed during the additive process could
lead to undesirable cracking and delamination phenomena that can seriously affect the performance of
the final component. The alloy composition can exacerbate crack and delamination formation, however,
the need to expand the portfolio of high-strength materials processable for PBF-LB\M makes the resolu-
tion of these undesirable phenomena a primary challenge in the additive manufacturing field. This works
aims to systematically investigate some strategies to make processable non-standard compositions. As no
standard compositions, the promising pre-alloyed AlSi10Cu8Mg composition was chosen for the present
work. Based on the results obtained from a condition of severe delamination, the synergetic use of appro-
priate process parameters and support structures can lead to crack-free and fully dense specimens also
when platform heating is not allowed. The developed approach could also be applied to adapt other
cracking-sensitive alloys for PBF-LB\M production
Short range investigation of sub-micron zirconia particles
The Perturbed Angular Correlations technique was used to determine the nanoconfigurations and their thermal behavior in two non-aggregated zirconia nanospheres of unlike sizes obtained by adding different water amounts during preparation. Three residues containing- Zr surroundings were determined for the non-crystalline starting zirconias, the two organics containing- ones being particle size dependent. Upon crystallization, the nanospheres showed the stabilization of both tetragonal (t´- and t- forms) and cubic (Xc- form) phases. Nevertheless, their amounts, temperature of appearance and thermal evolution depended on the residues containing- precursors. It was observed, in addition, that the structure of the smaller nanospheres became gradually monoclinic. The bigger spheres remained stabilized up to the highest temperatures certainly due to their lower specific surface area that favors the permanence of the oxygen defective t´- form
Para uma análise pedagógica dos contextos educativos - uma entrevista com Anna Bondioli, Monica Ferrari e Donatella Savio da Universidade de Pavia/Itália
Productivity Enhancement in Directed Energy Deposition: The Oscillating Scanning Strategy Approach
Directed Energy Deposition (DED) is an additive manufacturing process that enables the production of large metal components by melting the feedstock material while being deposited. An improvement of the production speed of this process would further increase its applicability in many industrial fields. The DED building rate is strictly related to the building parameters adopted, in particular to the laser spot diameter, which also affects the build accuracy and the surface quality of the components. The possibility of using a variable laser spot would result in a significant increase in the production rate in bulky zones, while also providing a good surface quality where needed. In the present work, an oscillating scanning strategy was used to create a large apparent laser spot (+ 170% of the nominal value) to produce 316L stainless steel samples via DED. The optimisation of the DED parameters with the oscillating strategy was performed using the single scan tracks (SSTs) approach. The morphologies of the SSTs obtained with different process parameters were assessed and the geometrical features related to the melt pools were analysed in order to select the most suitable X and Z displacements for the production of the cubic samples. The analyses of the cubes revealed that, if the correct overlap among nearby scans is selected, it is possible to obtain dense samples with all the oscillating diameters tested. Finally, comparing the building rate and powder efficiency values confirmed that this method can accelerate the building process and improve its overall performance
Novel 3D printable bio-based and biodegradable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) microspheres for selective laser sintering applications
Selective laser sintering (SLS) has become the most popular additive manufacturing process due to its high accuracy, productive efficiency, and surface quality. However, currently there are still very few commercially available polymeric materials suitable for this technique. This research work focused on the fabrication and characterization of bio-based and biodegradable microspheres obtained by oil-in-water emulsion solvent evaporation, starting from a poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) biopolymer matrix. First, the fabrication parameters were optimized to improve the morphological, thermal, and flowability properties of the synthetized microspheres. Once the best production conditions were established, the PHBH microspheres were further used to study their effective 3D printability on an SLS 3D printer using geometries varying from simple shapes to architectures with more complex internal patterns. The results of this research revealed that PHBH has promising applicability for the SLS technique. This study undertook the first step toward broadening the range of polymeric materials for this additive manufacturing technology. These findings will contribute to a greater and wider dissemination of the SLS technique in the future, as well as they will bring this manufacturing process closer to applications, such as the biomedical sector, where the use of biodegradable and biocompatible materials can add value to the final application
High-accuracy methodology for the integrative restoration of archaeological teeth by using reverse engineering techniques and rapid prototyping
The reconstruction of the original morphology of bones and teeth after sampling for physicochemical (e.g., radiocarbon and uranium series dating, stable isotope analysis, paleohistology, trace element analysis) and biomolecular analyses (e.g., ancient DNA, paleoproteomics) is appropriate in many contexts and compulsory when dealing with fossil human remains. The reconstruction protocols available to date are mostly based on manual re-integration of removed portions and can lead to an imprecise recovery of the original morphology. In this work, to restore the original external morphology of sampled teeth we used computed microtomography (microCT), reverse engineering (RE), computer-aided design (CAD) and rapid prototyping (RP) techniques to fabricate customized missing parts. The protocol was tested by performing the reconstruction of two Upper Palaeolithic human teeth from the archaeological excavations of Roccia San Sebastiano (Mondragone, Caserta, southern Italy) and Riparo I of Grotte Verdi di Pradis (Clauzetto, Pordenone, north-eastern Italy) (RSS2 and Pradis 1, respectively), which were sampled for physicochemical and biomolecular analyses. It involved a composite procedure consisting in: a) the microCT scanning of the original specimens; b) sampling; c) the microCT scanning of the specimens after sampling; d) the reconstruction of the digital 3D surfaces of the specimens before and after sampling; e) the creation of digital models of the missing/sampled portions by subtracting the 3D images of the preserved portions (after the sampling) from the images of the intact specimens (before the sampling) by using reverse engineering techniques; f) the prototyping of the missing/sampled portions to be integrated; g) the painting and application of the prototypes through the use of compatible and reversible adhesives. By following the proposed protocol, in addition to the fabrication of a physical element which is faithful to the original, it was possible to obtain a remarkable correspondence between the contact surfaces of the two portions (the original and the reconstructed one) without having to resort to any manipulation/adaptation of either element
Measurement of Branching Fractions and Rate Asymmetries in the Rare Decays B -> K(*) l+ l-
In a sample of 471 million BB events collected with the BABAR detector at the
PEP-II e+e- collider we study the rare decays B -> K(*) l+ l-, where l+ l- is
either e+e- or mu+mu-. We report results on partial branching fractions and
isospin asymmetries in seven bins of di-lepton mass-squared. We further present
CP and lepton-flavor asymmetries for di-lepton masses below and above the J/psi
resonance. We find no evidence for CP or lepton-flavor violation. The partial
branching fractions and isospin asymmetries are consistent with the Standard
Model predictions and with results from other experiments.Comment: 16 pages, 14 figures, accepted by Phys. Rev.
Recommended from our members
Measurement of B(B-->X_s {\gamma}), the B-->X_s {\gamma} photon energy spectrum, and the direct CP asymmetry in B-->X_{s+d} {\gamma} decays
The photon spectrum in B --> X_s {\gamma} decay, where X_s is any strange
hadronic state, is studied using a data sample of (382.8\pm 4.2) \times 10^6
e^+ e^- --> \Upsilon(4S) --> BBbar events collected by the BABAR experiment at
the PEP-II collider. The spectrum is used to measure the branching fraction B(B
--> X_s \gamma) = (3.21 \pm 0.15 \pm 0.29 \pm 0.08)\times 10^{-4} and the
first, second, and third moments = 2.267 \pm 0.019 \pm 0.032 \pm
0.003 GeV,, )^2> = 0.0484 \pm 0.0053 \pm 0.0077 \pm
0.0005 GeV^2, and )^3> = -0.0048 \pm 0.0011 \pm 0.0011
\pm 0.0004 GeV^3, for the range E_\gamma > 1.8 GeV, where E_{\gamma} is the
photon energy in the B-meson rest frame. Results are also presented for
narrower E_{\gamma} ranges. In addition, the direct CP asymmetry A_{CP}(B -->
X_{s+d} \gamma) is measured to be 0.057 \pm 0.063. The spectrum itself is also
unfolded to the B-meson rest frame; that is the frame in which theoretical
predictions for its shape are made.Comment: 37 pages, 19 postscript figures, submitted to Phys. Rev. D. No
analysis or results have changed from previous version. Some changes to
improve clarity based on interactions with Phys. Rev. D referees, including
one new Figure (Fig. 13), and some minor wording/punctuation/spelling
mistakes fixe
Measurement of CP Asymmetries and Branching Fractions in Charmless Two-Body B-Meson Decays to Pions and Kaons
We present improved measurements of CP-violation parameters in the decays
, , and , and of
the branching fractions for and . The
results are obtained with the full data set collected at the
resonance by the BABAR experiment at the PEP-II asymmetric-energy factory
at the SLAC National Accelerator Laboratory, corresponding to
million pairs. We find the CP-violation parameter values and
branching fractions where in each case, the first uncertainties are statistical
and the second are systematic. We observe CP violation with a significance of
6.7 standard deviations for and 6.1 standard deviations for
, including systematic uncertainties. Constraints on the
Unitarity Triangle angle are determined from the isospin relations
among the rates and asymmetries. Considering only the solution
preferred by the Standard Model, we find to be in the range
at the 68% confidence level.Comment: 18 pages, 11 postscript figures, submitted to Phys. Rev.
- …