Surface nanoscale axial photonics: Robust fabrication of high quality factor microresonators

Recently introduced Surface Nanoscale Axial Photonics (SNAP) makes it possible to fabricate high Q-factor microresonators and other photonic microdevices by dramatically small deformation of the optical fiber surface. To become a practical and robust technology, the SNAP platform requires methods enabling reproducible modification of the optical fiber radius at nanoscale. In this Letter, we demonstrate super-accurate fabrication of high Q-factor microresonators by nanoscale modification of the optical fiber radius and refractive index using the CO2 laser and the UV excimer laser beam exposures. The achieved fabrication accuracy is better than 2 angstroms in variation of the effective fiber radius

Low-voltage silicon photonic MEMS switch with vertical actuation

We present a vertically movable silicon photonic MEMS switch realized in IMEC's standard silicon photonics platform followed by a dedicated postprocessing for MEMS release. The device has six optical ports, which enable four switching configurations with a safe electrical isolation of the switch's actuator. A low actuation voltage of 3.75 V is required to efficiently switch the optical signal from the drop port to the through port of the device. The device exhibits port extinctions of 16 dB and 26 dB at its OFF and ON states, respectively. With an insertion loss of 35 nm, this component paves the way for low-power scalable circuits in MEMS-enabled silicon photonics

Optimization of the MALDIxin test for the rapid identification of colistin resistance in Klebsiella pneumoniae using MALDI-TOF-MS

Background. With the dissemination of carbapenemase producers, a revival of colistin was observed for the treatment of infections caused by multidrug-resistant Gram-negatives. Unfortunately, the increasing usage of colistin led to the emergence of resistance. In Klebsiella pneumoniae, colistin resistance arises through addition of L-arabinose-4N (L-Ara4N) or phosphoethanolamine (pEtN) on the native lipid A. The underlying mechanisms involve numerous chromosome-encoded genes or the plasmid-encoded phosphoethanolamine transferase MCR. Currently, detection of colistin resistance is time consuming since it still relies on MIC determination by broth microdilution. Recently, a rapid diagnostic test based on MALDI-TOF detection of modified lipid A was developed (the MALDIxin test) and tested on Escherichia coli and Acinetobacter baumannii. Objectives. Optimize the MALDIxin test for the rapid detection of colistin resistance in Klebsiella pneumoniae. Methods. This optimization consists on an additional mild-acid hydrolysis of 15 min in 1% acetic acid. The optimized method was tested on a collection of 81 clinical K. pneumoniae isolates including 49 colistin resistant strains among which 45 correspond to chromosome-encoded resistance, 3 MCR-related resistance and one isolate harbouring both mechanisms. Results. The optimized method allowed the rapid (< 30 min) identification of L-Ara4N and pEtN modified lipid A of K. pneumoniae which are known to be the real triggers of polymyxin resistance. In the same time, it discriminates between chromosome-encoded and MCR-related polymyxin resistance. Conclusions. The MALDIxin test has the potential to become an accurate tool for the rapid diagnostic of colistin resistance in clinically-relevant Gram negative bacteria

Silicon-Organic Hybrid (SOH) and Plasmonic-Organic Hybrid (POH) integration

Silicon photonics offers tremendous potential for inexpensive high-yield photonic-electronic integration. Besides conventional dielectric waveguides, plasmonic structures can also be efficiently realized on the silicon photonic platform, reducing device footprint by more than an order of magnitude. However, nei-ther silicon nor metals exhibit appreciable second-order optical nonlinearities, thereby making efficient electro-optic modulators challenging to realize. These deficiencies can be overcome by the concepts of silicon-organic hybrid (SOH) and plasmonic-organic hybrid integration, which combine SOI waveguides and plasmonic nanostructures with organic electro-optic cladding materials

Analysis of a plasma test cell including non-neutrality and complex collision mechanisms

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/97097/1/AIAA2012-3736.pd

Wafer-level vacuum sealing for packaging of silicon photonic MEMS

Silicon (Si) photonic micro-electro-mechanical systems (MEMS), with its low-power phase shifters and tunable couplers, is emerging as a promising technology for large-scale reconfigurable photonics with potential applications for example in photonic accelerators for artificial intelligence (AI) workloads. For silicon photonic MEMS devices, hermetic/vacuum packaging is crucial to the performance and longevity, and to protect the photonic devices from contamination. Here, we demonstrate a wafer-level vacuum packaging approach to hermetically seal Si photonic MEMS wafers produced in the iSiPP50G Si photonics foundry platform of IMEC. The packaging approach consists of transfer bonding and sealing the silicon photonic MEMS devices with 30 μm-thick Si caps, which were prefabricated on a 100 mm-diameter silicon-on-insulator (SOI) wafer. The packaging process achieved successful wafer-scale vacuum sealing of various photonic devices. The functionality of photonic MEMS after the hermetic/vacuum packaging was confirmed. Thus, the demonstrated thin Si cap packaging shows the possibility of a novel vacuum sealing method for MEMS integrated in standard Si photonics platforms

The electrophotonic silicon biosensor

The emergence of personalized and stratified medicine requires label-free and low-cost diagnostic technology capable of monitoring multiple disease biomarkers in parallel. Silicon photonic biosensors combine high sensitivity analysis with scalable, low-cost manufacturing technology but they tend to measure only a single biomarker and provide no information about their (bio)chemical activity. Here, we introduce an electrochemical silicon photonic sensor capable of highly sensitive and multiparameter profiling of biomolecules. Our electro-photonic technology consists of microring resonators optimally n-doped to support high Q resonances alongside electrochemical processes in situ. The inclusion of electrochemical processes enables site selective immobilization of different biomolecules, here single stranded DNA, onto individual microrings within a sensor array. The combination of photonic and electrochemical characterization of molecules bound to the sensor surface also provides direct quantification of binding density and unique insight into chemical reactivity that is unavailable with photonic detection alone. By exploiting both the photonic and the electrical properties of silicon, the sensor opens new modalities for sensing on the micro-scale

Generalized Kaehler Potentials from Supergravity

We consider supersymmetric N=2 solutions with non-vanishing NS three-form. Building on worldsheet results, we reduce the problem to a single generalized Monge-Ampere equation on the generalized Kaehler potential K recently interpreted geometrically by Lindstrom, Rocek, Von Unge and Zabzine. One input in the procedure is a holomorphic function w that can be thought of as the effective superpotential for a D3 brane probe. The procedure is hence likely to be useful for finding gravity duals to field theories with non-vanishing abelian superpotential, such as Leigh-Strassler theories. We indeed show that a purely NS precursor of the Lunin-Maldacena dual to the beta-deformed N=4 super-Yang-Mills falls in our class.Comment: "38 pages. v3: improved exposition and minor mistakes corrected in sec. 4