770 research outputs found

    Caribbean Plate margin evolution : constraints and current problems

    Get PDF
    Oceanic crust was generated at multiple spreading centres during the Jurassic and Early Cretaceous, forming a "proto-Caribbean" oceanic domain. During the Cretaceous, part of that crustal domain thickened into an oceanic plateau, of petrologic Mid-Ocean Ridge (MOR) to Ocean Island Basalt (OIB) affinity. Simultaneously, the South and North American continental plates developed rifting and tholeiitic magmatism in the Middle America region (Venezuela and Cuba). The rifting created space for the proto-Caribbean oceanic domain. Petrological and regional correlations suggest that, beginning in the Cretaceous, the proto-Caribbean domain was involved into two main stages of subduction, referred to as first and second "eo-Caribbean" phases. Each phase is characterized by oblique convergence. The older (mid-Cretaceous) stage, involved in subduction (probably eastward dipping) of thin proto-Caribbean lithosphere, with generation of Island Arc Tholeiitic (IAT) and Calc-Alkaline (CA) magmatism, accompanied by high pressure - low temperature (HP - LT) metamorphic effects, and formation of arc units and ophiolitic melanges (Guatemala, Cuba, Hispaniola and Puerto Rico, in the northern margin; Venezuela in the southern). The Late Cretaceous second stage consisted of westward dipping intra-oceanic subduction; it is recorded by tonalitic arc magmatism related to the onset of the Aves - Lesser Antilles arc system. Since the Late Cretaceous, the inner undeformed portions of the Caribbean oceanic plateau (i.e. the Colombian and Venezuelan Basins) were trapped east of the Pacific subduction of the Chortis, Chorotega and Choco blocks, ultimately building the Central American Isthmus. From Tertiary to Present, continuous eastward movement of the Caribbean Plate with respect to the Americas, gave rise to transpression along both the northern and southern margins, marked by scattered and dismembered ophiolitic terranes

    Caribbean Plate margin evolution: constraints and current problems

    Get PDF
    Oceanic crust was generated at multiple spreading centres during the Jurassic and Early Cretaceous, forming a “proto-Caribbean” oceanic domain. During the Cretaceous, part of that crustal domain thickened into an oceanic plateau, of petrologic Mid-Ocean Ridge (MOR) to Ocean Island Basalt (OIB) affinity. Simultaneously, the South and North American continental plates developed rifting and tholeiitic magmatism in the Middle America region (Venezuela and Cuba). The rifting created space for the proto-Caribbean oceanic domain. Petrological and regional correlations suggest that, beginning in the Cretaceous, the proto-Caribbean domain was involved into two main stages of subduction, referred to as first and second “eo-Caribbean” phases. Each phase is characterized by oblique convergence. The older (mid-Cretaceous) stage, involved in subduction (probably eastward dipping) of thin proto-Caribbean lithosphere, with generation of Island Arc Tholeiitic (IAT) and Calc-Alkaline (CA) magmatism, accompanied by high pressure - low temperature (HP - LT) metamorphic effects, and formation of arc units and ophiolitic melanges (Guatemala, Cuba, Hispaniola and Puerto Rico, in the northern margin; Venezuela in the southern). The Late Cretaceous second stage consisted of westward dipping intra-oceanic subduction; it is recorded by tonalitic arc magmatism related to the onset of the Aves - Lesser Antilles arc system. Since the Late Cretaceous, the inner undeformed portions of the Caribbean oceanic plateau (i.e. the Colombian and Venezuelan Basins) were trapped east of the Pacific subduction of the Chortis, Chorotega and Choco blocks, ultimately building the Central American Isthmus. From Tertiary to Present, continuous eastward movement of the Caribbean Plate with respect to the Americas, gave rise to transpression along both the northern and southern margins, marked by scattered and dismembered ophiolitic terranes

    High-MgO lavas associated to CFB as indicators of plume-related thermochemical effects: the case of ultra-titaniferous picrite-basalt from the Northern Ethiopian-Yemeni plateau

    Get PDF
    A comprehensive petrological and geochemical dataset is reported in order to define the thermo-compositional characteristics of Ti (Fe)-enriched picrite-basalt lavas (HT2, TiO2 3-7 wt%), erupted close to the axial zone of the inferred Afar mantle plume, at the centre of the originally continuous Ethiopian-Yemeni CFB plateau (ca. 30Ma) which is zonally arranged with progressively lower Ti basalts (HT1, TiO2 2-4 wt%; LT, TiO2 1-3 wt%) toward the periphery. Integrated petrogenetic modelling based on major and trace element analyses of bulk rocks, minerals and melt inclusions in olivines, as well as Sr-Nd-Pb-He-O isotope compositional variations enables us to make several conclusions. 1) The phase equilibria constraints indicate that HT2 primary picrites were generated at ca. 1570°C mantle potential temperatures (Tp) in the pressure range 4-5 GPa whereas the HT1 and LT primary melts formed at shallower level (< 2 to 3 GPa, Tp 1530 °C for HT1 and 1430°C for LT). Thus the Afar plume head was a thermally and compositionally zoned melting region with maximum excess temperatures of 300-350°C with respect to the ambient mantle. 2) The HT2 primary melts upwelled nearly adiabatically to the base of the continental crust (ca. 1 GPa) where fractionation of olivine, followed by clinopyroxene, led to variably differentiated picritic and basaltic magmas. 3) Trace element modelling requires that the primary HT2 melts were generated - either by fractional or batch melting (F 9-10%) - from a mixed garnet peridotite source (85%) with 15% eclogite (derived from transitional MORB protoliths included in Panafrican terranes) that has to be considered a specific Ti-Fe and incompatible element enriched component entrained by the Afar plume. 4) The LT, HT1 and HT2 lavas have 143Nd/144Nd = 0.5131-0.5128, whereas Sr-Pb isotopes are positively correlated with TiO2, varying from 87 Sr/86Sr 0.7032 and 206Pb/204Pb 18.2 in LT basalts to 87Sr/86Sr 0.7044 and 206Pb/204Pb 19.4 in HT2 picrite-basalts. High 3He/4He (15-20 RA) ratios are exclusively observed in HT2 lavas, confirming earlier evidence that these magmas require a component of deep mantle in addition to eclogite, while the LT basalts may more effectively reflect the signature of the pre-existing mantle domains. The comparison between high-MgO (13-22%) lavas from several Phanerozoic CFB provinces (Karoo, Paranà-Etendeka, Emeishan, Siberia, Deccan, North Atlantic Province) shows that they share extremely high mantle potential temperatures (Tp 1550-1700°C) supporting the view that hot mantle plumes are favoured candidates for triggering many LIPs. However, the high incompatible element and isotopic variability of these high-MgO lavas (and associated CFB) suggest that plume thermal anomalies are not necessarily accompanied by significant and specific chemical effects, which depend on the nature of mantle materials recycled during the plume rise, as well as by the extent of related mantle enrichments (if any) on the pre-existing lithospheric section

    Petrology, geochemistry and origin of the Sierra de Baza ophiolites (Betic Cordillera, Spain)

    Get PDF
    In this work we present for the first time a petrological-geochemical and genetic study of the Sierra de Baza ophiolites, which represent one of the ophiolitic occurrences of the Betic Cordillera (Southern Spain). They are composed of ultramafic, mafic and sedimentary rocks, largely affected both by ocean floor and polyphasic metamorphism during the Alpine orogeny. Ultramafic rocks are serpentinized lherzolites and harzburgites, whereas the metabasites are meta-gabbros and meta-basalts. On the whole, Sierra de Baza ophiolites show striking geochemical similarities with those from other Betic occurrences, as well as with other Tethyan ophiolites of the Western Mediterranean (Calabria, Internal and External Ligurides, Platta, Corsica and Western Alps). In particular, metabasites show petrological and geochemical features similar to the E-MORB magmatism of the Atlantic Ridge between 45 and 63ºN generated under ultra-slow spreading ridge conditions. This process originated a strip of few hundreds km of ocean floor at the western end of the Tethys, located SE of the Iberian-European margin during the Mesozoic. The inversion of the stress regime in the European-Iberian and African geodynamics, starting from the Late-Middle Cretaceous, caused subduction and metamorphism in the eclogite facies of oceanic slices that were partially exhumed on the continental margin, forming the Betic Ophiolites. These ophiolites were disarticulated and dismembered as a result of the shift towards SW of the Alboran continental block, progressively separated from the AlKaPeCa (Alboran, Kabilias, Peloritani, Calabria) microplate, finally occupying their current position in the Betic Internal Zones

    Constraints on the mantle sources of the Deccan traps from the petrology and geochemistry of the basalts of Gujarat state (Western India)

    Get PDF
    The late Cretaceous-early Tertiary flood basalts in the Gujarat area of the northwestern Deccan Traps (Kathiawar peninsula, Pavagadh hills and Rajpipla) exhibit a wide range of compositions, from picrite basalts to rhyolites; moreover, the basaltic rocks have clearly distinct TiO2 contents at any given degree of differentiation and strongly resemble the low-titanium and hightitanium basalts found in most of the Gondwana continental flood basalt (CFB) suites. Four magma groups are petrologically and geochemically distinguished: (1) A low-Ti group, characterized by rocks with varying SiO2 saturation, and with TiO2 <1.8 wt%, extremely low incompatible trace element abundances, low Zr/γ (av- 3.8), Ti/ V (av. 27), and a very slight large ion lithophile element (LJLE) enrichment over high field strength elements (HFSE). These rocks share some features with the Bushe Formation of the Western Ghats farther south, but have distinct geochemical characters, in particular the strong depletion in most incompatible trace elements. (2) A high-Ti group, characterized by a more K-rich character than the low-Ti rocks, and with a strong enrichment in incompatible elements, similar to average ocean island basalt (OIB), e.g. high TiO2 (>1.8 wt% in picrites), Nb (>19 p.p.m.) Zr/γ (av. 6.5) and Tt/V (av. 47). (3) An intermediate-Ti group, with TiO2 contents slightly lower than the high-Ti rocks at the same degree of evolution, and with correspondingly lower incompatible trace element contents and ratios, in particular K2O, Nb, Ba and Zr/Y (av. 5.2). (4) A potassium-rich group (KT), broadly similar in geochemical character to the high-Ti group but showing more extreme K, Rb and Ba enrichment (av. K20/Na20~l; Ba/Y~20). The most primitive low-Ti and high-Ti picrites, when corrected for low-pressure olivine fractionation, show distinct major (and trace) element geochemistry, in particular for CaO/AI2O3, CaO/TiO2 and Al2O3/TiO2, and moderate but significant variations in their SiO2 and Fe2Ost contents; these characteristics strongly suggest the involvement of different mantle sources, more depleted for the low-Ti picrites, and richer in cpxfor the high-Ti picrites, but with broadly the same pressures of equilibration (27-14 kbar). This, in turn, suggests a strong lateral heterogeneity in the Gujarat Trap mantle. Low-Ti picrites and related differentiates in Kathiawar are reported systematically for the first time here, and suggest the existence of HFSE-depleted mantle in the northwestern Deccan Traps, with extension at least to the Seychelles Islands and to the area of the Bushe Formation near Bombay in the pre-drift position, before the development of the Carlsberg Ridge. The absence of correlations between LILE/HFSE ratios and SiO2 argues against crustal contamination processes acting on the low-Ti picrites, possibly owing to their probably rapid uprise to the surface. Consequently, the mantle region of this rock group was probably re-enriched by small amounts of ULE-rich materials. The substantially higher, trace element enrichment of the least differentiated high-Ti picrites, relative to the basalts of the Ambe-noli and Mahableshwar Formations of the Western Ghats, testifies also to the presence of more incompatible element rich, OIB4ike mantle sources in northern and northwestern Gujarat. These sources were geochemicaily similar to the present-day Reunion mantle sources

    The Betic Ophiolites and the Mesozoic Evolution of the Western Tethys

    Get PDF
    The Betic Ophiolites consist of numerous tectonic slices, metric to kilometric in size, of eclogitized mafic and ultramafic rocks associated to oceanic metasediments, deriving from the Betic oceanic domain. The outcrop of these ophiolites is aligned along 250 km in the Mulhacén Complex of the Nevado-Filábride Domain, located at the center-eastern zone of the Betic Cordillera (SE Spain). According to petrological/geochemical inferences and SHRIMP (Sensitive High Resolution Ion Micro-Probe) dating of igneous zircons, the Betic oceanic lithosphere originated along an ultra-slow mid-ocean ridge, after rifting, thinning and breakup of the preexisting continental crust. The Betic oceanic sector, located at the westernmost end of the Tethys Ocean, developed from the Lower to Middle Jurassic (185–170 Ma), just at the beginning of the Pangaea break-up between the Iberia-European and the Africa-Adrian plates. Subsequently, the oceanic spreading migrated northeastward to form the Ligurian and Alpine Tethys oceans, from 165 to 140 Ma. Breakup and oceanization isolated continental remnants, known as the Mesomediterranean Terrane, which were deformed and affected by the Upper Cretaceous-Paleocene Eo-Alpine high-pressure metamorphic event, due to the intra-oceanic subduction of the Jurassic oceanic lithosphere and the related continental margins. This process was followed by the partial exhumation of the subducted oceanic rocks onto their continental margins, forming the Betic and Alpine Ophiolites. Subsequently, along the Upper Oligocene and Miocene, the deformed and metamorphosed Mesomediterranean Terrane was dismembered into different continental blocks collectively known as AlKaPeCa microplate (Alboran, Kabylian, Peloritan and Calabrian). In particular, the Alboran block was displaced toward the SW to occupy its current setting between the Iberian and African plates, due to the Neogene opening of the Algero-Provençal Basin. During this translation, the different domains of the Alboran microplate, forming the Internal Zones of the Betic and Rifean Cordilleras, collided with the External Zones representing the Iberian and African margins and, together with them, underwent the later alpine deformation and metamorphism, characterized by local differences of P-T (Pressure-Temperature) conditions. These Neogene metamorphic processes, known as Meso-Alpine and Neo-Alpine events, developed in the Nevado-Filábride Domain under Ab-Ep amphibolite and greenschists facies conditions, respectively, causing retrogradation and intensive deformation of the Eo-Alpine eclogites.This research was funded by Project CGL2009-12369 of the Spanish Ministry of Science and Innovation, co-financed with FEDER funds, and by Research Group RNM 333 of Junta de Andalucía (Spain)

    Subduction-related hybridization of the lithospheric mantle revealed by trace element and Sr-Nd-Pb isotopic data in composite xenoliths from Tallante (Betic Cordillera, Spain)

    Get PDF
    Ultramafic xenoliths are rarely found at convergent plate margins. A notable exception is in the Betic Cordillera of southern Spain, where the eruption of xenolith-bearing alkaline basalts during the Pliocene post-dated the Cenozoic phase of plate convergence and subduction-related magmatism. Mantle xenoliths of the monogenetic volcano of Tallante display extreme compositional heterogeneities, plausibly related to multiple tectono-magmatic episodes that affected the area. This study focuses on two peculiar composite mantle xenolith samples from Tallante, where mantle peridotite is crosscut by felsic veins of different size and mineralogy, including quartz, orthopyroxene, and plagioclase. The veins are separated from the peridotite matrix by an orthopyroxene-rich reaction zone, indicating that the causative agents were alkali-rich hydrous silica-oversaturated melts, which were likely related to recycling of subducted continental crust components. The present study reports new and detailed major and trace elements and Sr-Nd-Pb analyses of the minerals in the composite Tallante xenoliths that confirm the continental crust derivation of the metasomatic melts, and clarifies the mode in which subduction-related components are transferred to the mantle wedge in orogenic areas. The particular REE patterns of the studied minerals, as well as the variation of the isotopic ratios between the different zones of the composite xenoliths, reveal a complex metasomatic process. The distribution of the different elements, and their isotope ratios, in the studied xenoliths are controlled by the mineral phases stabilised by the interaction between the percolating melts and the peridotitic country rock. The persistence of marked isotopic heterogeneities and the lack of re-equilibration suggest that metasomatism of the sub-continental lithospheric mantle occurred shortly before the xenolith exhumation. In this scenario, the studied xenoliths and the metasomatic processes that affected them may be representative of the mantle sources of mafic potassic to ultrapotassic magmas occurring in post-collisional tectonic settings

    Subduction-related hybridization of the lithospheric mantle revealed by trace element and Sr-Nd-Pb isotopic data in composite xenoliths from Tallante (Betic Cordillera, Spain)

    Get PDF
    Ultramafic xenoliths are rarely found at convergent plate margins. A notable exception is in the Betic Cordillera of southern Spain, where the eruption of xenolith-bearing alkaline basalts during the Pliocene post-dated the Cenozoic phase of plate convergence and subduction-related magmatism. Mantle xenoliths of the monogenetic volcano of Tallante display extreme compositional heterogeneities, plausibly related to multiple tectono-magmatic episodes that affected the area. This study focuses on two peculiar composite mantle xenolith samples from Tallante, where mantle peridotite is crosscut by felsic veins of different size and mineralogy, including quartz, orthopyroxene, and plagioclase. The veins are separated from the peridotite matrix by an orthopyroxene-rich reaction zone, indicating that the causative agents were alkali-rich hydrous silica-oversaturated melts, which were likely related to recycling of subducted continental crust components. The present study reports new and detailed major and trace elements and Sr-Nd-Pb analyses of the minerals in the composite Tallante xenoliths that confirm the continental crust derivation of the metasomatic melts, and clarifies the mode in which subduction-related components are transferred to the mantle wedge in orogenic areas. The particular REE patterns of the studied minerals, as well as the variation of the isotopic ratios between the different zones of the composite xenoliths, reveal a complex metasomatic process. The distribution of the different elements, and their isotope ratios, in the studied xenoliths are controlled by the mineral phases stabilised by the interaction between the percolating melts and the peridotitic country rock. The persistence of marked isotopic heterogeneities and the lack of re-equilibration suggest that metasomatism of the sub-continental lithospheric mantle occurred shortly before the xenolith exhumation. In this scenario, the studied xenoliths and the metasomatic processes that affected them may be representative of the mantle sources of mafic potassic to ultrapotassic magmas occurring in post-collisional tectonic settings

    Using HoloLens Mixed Reality to research correlations between language and movement: a case study

    Get PDF
    Communication can be defined as the understanding and exchanging of meaningful messages. The role of communication is central to the lives of human beings as, everyday, we use language to interact with the world around us. Linguistic skills play a fundamental role in this scenario and Language Disorders (LD) are impairments that limit the processing of linguistic information. Early and accurate identification of LD is thus essential to promote lifelong learning and well-being. From an evolutionary perspective, some human language constructs evolved from an ancestral motor system and share the same neural pathways in the Broca’s area of the brain. This suggests a correlation between action and language. If such a relationship is well established and reliable, it would be possible to use the former as a marker of the latter. The hypothesis of our work, in a nutshell, is that movement can be a predictor of language. To study this correlation, we developed C(H)o(L)ordination, a Mixed Reality (MR) application for HoloLens 2. The application offers several activities based on visual stimuli involving motor movements, which tap on the same skills needed to perform some language tasks. We performed an exploratory study with N=22 users to test the application usability and user experience. The results suggest that C(H)o(L)ordination is a usable and powerful tool to gather insights on the ongoing debate about language evolution and language disorders
    corecore