The Extended Map methodology: Technology roadmapping for SMES clusters

For small medium enterprises, customization of roadmapping is required. Although the phases of its process are solid and shared in the literature, the sub-phases and specific activities to be undertaken are only mentioned and do not provide sufficient guidance for implementation. The paper proposes a new methodology for the implementation of technology roadmapping. The research strategy is based on action research with two cycles of action. The first cycle (Opportunity profile) simplifies the traditional methodology. The second cycle (Extended Map) relies on collaboration of small medium enterprises coordinated by an intermediary and adds an ecosystem view to the methodology. \ua9 2015 Elsevier B.V. All rights reserved

Field reliability of GaAs emitters for fiber optic telecommunication systems

GaAs based emitters are widely used in telecommunication systems, and will be probably the core of short haul communications, even if a lot of doubts still exist on their reliability and the few available field results are not too optimistic. For these reasons we decided to follow with a particular attention all the problems related to these devices, investigating reliability by means of accelerated tests and of an accurate survey of field troubles. In this paper, we first of all report our field data, coming from more than five years experience, which show that "reasonable" results (in the range of 2000 FITs for LDs), can be obtained with commercially available devices; as a second step, failure analysis allows to localize failures,thus understanding the appropriate corrective actions to be taken. highlighting the specific process report also same For chip related failures, detailed examples are reported, different failure mechanisms, that, when not related to defects, are the same found during accelerated tests; we examples of failures due to interconnections and packaging

Absences from work among healthcare workers: are they related to influenza shot adherence?

BACKGROUND: The coverage for influenza vaccination among healthcare workers (HCWs) is inadequate in many countries despite strong recommendations; is there evidence that influenza vaccination is effective in preventing absenteeism? Aim of the study is to evaluate the influenza vaccination coverage and its effects on absences from work among HCWs of an Italian academic healthcare trust during the 2017-2018 influenza season. METHODS: We performed a retrospective study to identify predictive characteristics for vaccination, and a retrospective cohort study to establish the effect of vaccination on absences among the vaccinated and non-vaccinated cohorts between December 2017 and May 2018. Overall absence rates over the whole observation period and sub-rates over 14-days intervals were calculated; then comparison between the two groups were conducted applying Chi-square test. RESULTS: Influenza vaccination coverage among 4419 HCWs was 14.5%. Age, university degree, medical care area and physician profile were positively associated with vaccine uptake. Globally during influenza season non-vaccinated HCWs lost 2.47/100 person-days of work compared to 1.92/100 person-days of work among vaccinated HCWs (p\u2009<\u20090.001); significant differences in absences rates resulted when focusing on the influenza epidemic peak. CONCLUSIONS: Factors predicting influenza uptake among HCWs were male sex, working within medical care area and being a physician. Absenteeism among HCWs resulted to be negatively correlated with vaccination against influenza. These findings add evidence to the urgent need to implement better influenza vaccination strategies towards HCWs to tackle vaccine hesitancy among professionals

How social start-ups avoid being falling stars when developing social innovation

The aim of this study is to provide new insights into the social innovation (SI) development process in the context of social start-ups. A multiple case study identifies the issues and mechanisms for social start-ups to develop a social need into a potentially scalable innovation and to validate and scale it up, while avoiding a possible failure. Results show that key challenges faced by social start-ups can be characterized according to the stage of the SI development path. Firstly, social start-ups' failure can be caused by the lack of expertise in social problems and of flexible processes for social ventures creation; secondly, by the lack of awareness of SI benefits and proper resources allocation; and, finally, by a weak understanding of the impact and intangible outcomes of the developed SI in society, while ensuring its economic sustainability. Successfully overcoming these challenges requires social start-ups to put in place the following mechanisms: (1) leveraging a vision and motivations that balance tensions in terms of the radical, economic and cultural aspects of SI; (2) engaging the SI stakeholders in different (and sequential) phases of SI development process; and (3) identifying and adopting the most suitable technological, financial and communication tools in an integrated way

Conhecimentos sobre AIDS e alterações nas ações profissionais das manicures de Ribeirão Preto

Este estudo teve como objetivos avaliar os conhecimentos de manicures de Ribeirão Preto acerca de aspectos gerais sobre AIDS e as alterações ocorridas nas suas ações profissionais com o advento desta síndrome. Foram selecionadas 40 manicures no município de Ribeirão Preto-SP, através da lista telefônica e por indicação das próprias manicures. Os dados foram coletados através de entrevista individual, que foi norteada por um formulário estruturado. Os resultados evidenciaram que algumas das profissionais avaliadas apresentam conhecimento incorreto sobre noções básicas quanto a AIDS (meios de transmissão e de prevenção). Ressalta-se que os meios de esterilização utilizados por 100% delas não são eficazes para inativação do HIV.This study was carried out to evaluate the knowledge of Ribeirão Preto manicurists concerning the general features of AIDS and the changes occurred in their professional procted in consequence to this syndrome. A total of 40 manicurists form. Ribeirão Preto-SP were selected, through the telephone number guide and by considering the manicurists indications . The data were collected through individual interview, based on a structured form. The results showed that some professionals have incorrect knowledge about basic notions related to HIV/ AIDS (transmission/prevention). We emphasize that sterilizaton methods used by all of them are not efficient to inativate HIV

VERTICAL AND HORIZONTAL FORCES DURING CUTIING IN BASKETBALL UNDER DIFFERENT CONDITIONS

The purpose of this study is to evaluate ground reaction force responses in professional basketball athletes while executing this sport's typical cutting maneuver with and without ankle bracing: taping, aircast-type orthosis and basketball shoes. Eight athletes were dynamically analyzed during a basketball cutting maneuver with a force platform. We collected vertical and medial-lateral forces under these three conditions and analyzed force peaks of foot contact with the ground and propulsion and growth gradient for these forces. Results show that bracing did not significantly change Fymax1 and GCFymax1; significantly reduced Fymax2 and GG Fymax2. With respect to the medial-lateral component, there were no significant differences in relation to force magnitudes between the three study conditions. However, GG Fzmax1 was significantly greater for the sport shoe condition than for the taping condition. Bracing decreased ground reaction force at some instances, but increased in others

Planar AFM macro-probes to study the biomechanical properties of large cells and 3D cell spheroids

The ability to measure mechanical response of cells under applied load is essential for developing more accurate models of cell mechanics and mechanotransduction. Living cells have been mechanically investigated by several approaches. Among them, atomic force microscopy (AFM) is widely used thanks to its high versatility and sensitivity. In the case of large cells or 3D multicellular aggregates, standard AFM probes may not be appropriate to investigate the mechanical properties of the whole biological system. Owing to their size, standard AFM probes can compress only a single somatic cell or part of it. To fill this gap, we have designed and fabricated planar AFM macro-probes compatible with commercial AFM instruments. The probes are constituted of a large flat compression plate, connected to the chip by two flexible arms, whose mechanical characteristics are tuned for specific biological applications. As proof of concept, we have used the macro-probes to measure the viscoelasticity of large spherical biological systems, which have a diameter above 100 \u3bcm: human oocytes and 3D cell spheroids. Compression experiments are combined with visual inspection, using a side-view configuration imaging, which allows us to monitor the sample morphology during the compression and to correlate it with the viscoelastic parameters. Our measurements provide a quantitative estimate of the relaxation times of such biological systems, which are discussed in relation to data present in literature. The broad applicability of the AFM macro-probes can be relevant to study the biomechanical features in any biological process involving large soft materials. Statement of Significance: The understanding of the role of physical factors in defining cell and tissue functions requires to develop new methods or improve the existing ones to accurately measure the biomechanical properties. AFM is a sensitive and versatile tool to measure the mechanical features from single proteins to single cells. When cells or cell aggregates exceed few tens of microns, AFM suffers from limitations. On these biological systems the control of the contact area and the application of a precise uniform compression becomes crucial. A modification of the standard cantilevers fabrication allowed us obtaining AFM macro-probes, having large planar contact area and spring constant suitable for biological investigations. They were demonstrated valuable to characterize the mechanical properties of large hierarchical biological systems

Exploring the measurement of markedness and its relationship with other linguistic variables

Antonym pair members can be differentiated by each word's markedness-that distinction attributable to the presence or absence of features at morphological or semantic levels. Morphologically marked words incorporate their unmarked counterpart with additional morphs (e.g., "unlucky" vs. "lucky"); properties used to determine semantically marked words (e.g., "short" vs. "long") are less clearly defined. Despite extensive theoretical scrutiny, the lexical properties of markedness have received scant empirical study. The current paper employs an antonym sequencing approach to measure markedness: establishing markedness probabilities for individual words and evaluating their relationship with other lexical properties (e.g., length, frequency, valence). Regression analyses reveal that markedness probability is, as predicted, related to affixation and also strongly related to valence. Our results support the suggestion that antonym sequence is reflected in discourse, and further analysis demonstrates that markedness probabilities, derived from the antonym sequencing task, reflect the ordering of antonyms within natural language. In line with the Pollyanna Hypothesis, we argue that markedness is closely related to valence; language users demonstrate a tendency to present words evaluated positively ahead of those evaluated negatively if given the choice. Future research should consider the relationship of markedness and valence, and the influence of contextual information in determining which member of an antonym pair is marked or unmarked within discourse

Clinal and Allometric Variation in the Skull of Sexually Dimorphic Opossums

Three species of sexually-dimorphic opossums are broadly distributed across South America: the habitat generalist Didelphis albiventris, the Atlantic forest-dweller D. aurita, and the Amazonian forest-dweller D. marsupialis. We used 2D geometric morphometrics to quantify skull size and shape variation in the three opossum species and test the hypothesis that degrees of sexual dimorphism and morphological variation should follow a cline across different South American environments. We first detected a strong impact of allometry on skull shape variation especially in males of the three species that tend to show stronger bite force, which is thought to be related to sexual selection. The degree of sexual dimorphism varies in relation to environmental seasonality. The skull of the plastic species, D. albiventris, showed the strongest ecogeographical pattern, showing conformity to Bergmann’s rule. In this species, size increase and shape changes are associated with colder climates and stronger bite force. Skulls of D. marsupialis are moderately impacted by climate, following productivity patterns of tropical regions associated with fruit availability. The most territorial species, D. aurita, has the strongest allometric effect and shows no clinal variation. Our results also support a degree of evolutionary constraint on the skull morphology of the three South American opossums. The black-eared opossums clade exhibits a weak (D. marsupialis) or nonexistent (D. aurita) association between skull morphology and climate. Skull shape changes of D. aurita are allometrically driven while those of the white-eared opossums clade (D. albiventris) vary in relation to the environment

The role of morphological markedness in the processing of number and gender agreement in Spanish: an event-related potential investigation

Current morphological theory assumes that feature values, such as masculine and feminine or singular and plural, are asymmetrically represented. That is, one member of the opposition (e.g. feminine for gender, plural for number) is assumed to be marked, and the other one, unmarked. The present study examines how these asymmetries impact agreement resolution in Spanish. Agreement was manipulated between a noun acting as head of a relative clause and an adjective located inside the relative clause (e.g. catedral que parecía inmensa “cathedral that looked huge”). Half of the nouns were feminine (marked) and the other half, masculine (unmarked). Half of the nouns were used in the plural (marked) and the other half, in the singular (unmarked). Twenty-seven Spanish native speakers read 240 sentences while their brain activity was recorded with EEG and performed a grammaticality judgment. Results showed that both number and gender violations elicited a central-posterior P600, a component associated with syntactic repair, and a late anterior negativity, argued to reflect working memory costs. Only the P600 was affected by markedness. It started earlier for violations where the mismatching feature was marked. Moreover, it was larger for errors where the mismatching feature was marked, although this amplitude modulation only emerged for number, possibly due to differences in how number and gender cues were realized (i.e. both masculine and feminine showed overt inflection, but singular was uninflected relative to plural). These results suggest that the parser is sensitive to markedness asymmetries in the course of online processing